docs/master
view discussion.roff @ 168:277eeb5ba223
Applied suggestions by Lydi.
| author | markus schnalke <meillo@marmaro.de> |
|---|---|
| date | Tue, 10 Jul 2012 11:46:20 +0200 |
| parents | f102dcc06bb9 |
| children | f4ffe121a0a2 |
line source
1 .H0 "Discussion
2 .P
3 This main chapter discusses the practical work done in the mmh project.
4 It is structured along the goals to achieve.
5 The concrete work done
6 is described in the examples of how the general goals were achieved.
7 The discussion compares the current version of mmh with the state of
8 nmh just before the mmh project started, i.e. Fall 2011.
9 Current changes of nmh will be mentioned only as side notes.
10 .\" XXX where do I discuss the parallel development of nmh?
14 .\" --------------------------------------------------------------
15 .H1 "Streamlining
17 .P
18 MH had been considered an all-in-one system for mail handling.
19 The community around nmh has a similar understanding.
20 In fundamental difference, mmh shall be a MUA only.
21 I believe that the development of all-in-one mail systems is obsolete.
22 Today, email is too complex to be fully covered by single projects.
23 Such a project won't be able to excel in all aspects.
24 Instead, the aspects of email should be covered by multiple projects,
25 which then can be combined to form a complete system.
26 Excellent implementations for the various aspects of email exist already.
27 Just to name three examples: Postfix is a specialized MTA,
28 .\" XXX homepages verlinken
29 Procmail is a specialized MDA, and Fetchmail is a specialized MRA.
30 I believe that it is best to use such specialized tools instead of
31 providing the same function again as a side-component in the project.
32 .\" XXX mail agent picture here
33 .P
34 Doing something well, requires to focus on a small set of specific aspects.
35 Under the assumption that focused development produces better results
36 in the particular area, specialized projects will be superior
37 in their field of focus.
38 Hence, all-in-one mail system projects \(en no matter if monolithic
39 or modular \(en will never be the best choice in any of the fields.
40 Even in providing the best consistent all-in-one system they are likely
41 to be beaten by projects that focus only on integrating existing mail
42 components to a homogeneous system.
43 .P
44 The limiting resource in Free Software community development
45 is usually man power.
46 If the development power is spread over a large development area,
47 it becomes even more difficult to compete with the specialists in the
48 various fields.
49 The concrete situation for MH-based mail systems is even tougher,
50 given the small and aged community, including both developers and users,
51 it has.
52 .P
53 In consequence, I believe that the available development resources
54 should focus on the point where MH is most unique.
55 This is clearly the user interface \(en the MUA.
56 Peripheral parts should be removed to streamline mmh for the MUA task.
59 .H2 "Mail Transfer Facilities
60 .Id mail-transfer-facilities
61 .P
62 In contrast to nmh, which also provides mail submission and mail retrieval
63 agents, mmh is a MUA only.
64 This general difference initiated the development of mmh.
65 Removing the mail transfer facilities had been the first work task
66 in the mmh project.
67 .P
68 Focusing on one mail agent role only is motivated by Eric Allman's
69 experience with Sendmail.
70 He identified the limitation of Sendmail to the MTA task as one reason for
71 its success:
72 .[ [
73 costales sendmail
74 .], p. xviii]
75 .QS
76 Second, I limited myself to the routing function \(en
77 I wouldn't write user agents or delivery back-ends.
78 This was a departure of the dominant through of the time,
79 in which routing logic, local delivery, and often the network code
80 were incorporated directly into the user agents.
81 .QE
82 .P
83 In nmh, the Mail Submission Agent (MSA) is called
84 \fIMessage Transfer Service\fP (MTS).
85 This facility, implemented by the
86 .Pn post
87 command, established network connections and spoke SMTP to submit
88 messages to be relayed to the outside world.
89 The changes in email demanded changes in this part of nmh too.
90 Encryption and authentication for network connections
91 needed to be supported, hence TLS and SASL were introduced into nmh.
92 This added complexity to nmh without improving it in its core functions.
93 Also, keeping up with recent developments in the field of
94 mail transfer requires development power and specialists.
95 In mmh this whole facility was simply cut off.
96 .Ci f6aa95b724fd8c791164abe7ee5468bf5c34f226
97 .Ci fecd5d34f65597a4dfa16aeabea7d74b191532c3
98 .Ci 156d35f6425bea4c1ed3c4c79783dc613379c65b
99 Instead, mmh depends on an external MSA.
100 The only outgoing interface available to mmh is the
101 .Pn sendmail
102 command, which almost any MSA provides.
103 If not, a wrapper program can be written.
104 It must read the message from the standard input, extract the
105 recipient addresses from the message header, and hand the message
106 over to the MSA.
107 For example, a wrapper script for qmail would be:
108 .VS
109 #!/bin/sh
110 exec qmail-inject # ignore command line arguments
111 VE
112 The requirement to parse the recipient addresses out of the message header
113 is likely to be removed in the future.
114 Then mmh would give the recipient addresses as command line arguments.
115 This appears to be the better interface.
116 .\" XXX implement it
117 .P
118 To retrieve mail, the
119 .Pn inc
120 command acted as Mail Retrieval Agent (MRA).
121 It established network connections
122 and spoke POP3 to retrieve mail from remote servers.
123 As with mail submission, the network connections required encryption and
124 authentication, thus TLS and SASL were added.
125 Support for message retrieval through IMAP will become necessary
126 to be added soon, too, and likewise for any other changes in mail transfer.
127 Not so for mmh because it has dropped the support for retrieving mail
128 from remote locations.
129 .Ci ab7b48411962d26439f92f35ed084d3d6275459c
130 Instead, it depends on an external tool to cover this task.
131 In mmh, two paths exist for messages to enter mmh's mail storage:
132 (1) Mail can be incorporated with
133 .Pn inc
134 from the system maildrop, or (2) with
135 .Pn rcvstore
136 by reading them, one at a time, from the standard input.
137 .P
138 With the removal of the MSA and MRA, mmh converted from an all-in-one
139 mail system to being a MUA only.
140 Now, of course, mmh depends on third-party software.
141 An external MSA is required to transfer mail to the outside world;
142 an external MRA is required to retrieve mail from remote machines.
143 There exist excellent implementations of such software,
144 which likely are superior than the internal version.
145 Additionally, the best suiting programs can be freely chosen.
146 .P
147 As it had already been possible to use an external MSA or MRA,
148 why not keep the internal version for convenience?
149 .\" XXX ueberleitung
150 The question whether there is sense in having a fall-back pager in all
151 the command line tools, for the cases when
152 .Pn more
153 or
154 .Pn less
155 aren't available, appears to be ridiculous.
156 Of course, MSAs and MRAs are more complex than text pagers
157 and not necessarily available but still the concept of orthogonal
158 design holds: ``Write programs that do one thing and do it well.''
159 .[
160 mcilroy unix phil
161 p. 53
162 .]
163 .[
164 mcilroy bstj foreword
165 .]
166 Here, this part of the Unix philosophy was applied not only
167 to the programs but to the project itself.
168 In other words:
169 Develop projects that focus on one thing and do it well.
170 Projects grown complex should be split for the same reasons programs
171 grown complex should be split.
172 If it is conceptionally more elegant to have the MSA and MRA as
173 separate projects then they should be separated.
174 This is the case here, in my opinion.
175 The RFCs propose this separation by clearly distinguishing the different
176 mail handling tasks.
177 .[
178 rfc 821
179 .]
180 The small interfaces between the mail agents support the separation.
181 .P
182 In the beginning, email had been small and simple.
183 At that time,
184 .Pn /bin/mail
185 had covered anything there was to email and still had been small
186 and simple.
187 Later, the essential complexity of email increased.
188 (Essential complexity is the complexity defined by the problem itself.\0
189 .[[
190 brooks no silver bullet
191 .]])
192 Email systems reacted to this change: They grew.
193 RFCs started to introduce the concept of mail agents to separate the
194 various tasks because they became more extensive and new tasks appeared.
195 As the mail systems grew even more, parts were split off.
196 In nmh, for instance, the POP server, which was included in the original
197 MH, was removed.
198 Now is the time to go one step further and split off the MSA and MRA, too.
199 Not only does this decrease the code size of the project,
200 but, more important, it unburdens mmh of the whole field of
201 message transfer with all its implications for the project.
202 There is no more need to concern with changes in network transfer.
203 This independence is received by depending on an external program
204 that covers the field.
205 Today, this is a reasonable exchange.
206 .P
207 .\" XXX ueberleitung ???
208 Functionality can be added in three different ways:
209 .BU
210 Implementing the function originally in the project.
211 .BU
212 Depending on a library that provides the function.
213 .BU
214 Depending on a program that provides the function.
215 .P
216 .\" XXX Rework sentence
217 While adding the function originally to the project increases the
218 code size most and requires most maintenance and development work,
219 it makes the project most independent of other software.
220 Using libraries or external programs require less maintenance work
221 but introduces dependencies on external software.
222 Programs have the smallest interfaces and provide the best separation
223 but possibly limit the information exchange.
224 External libraries are stronger connected than external programs,
225 thus information can be exchanged more flexible.
226 Adding code to a project increases maintenance work.
227 .\" XXX ref
228 Implementing complex functions in the project itself adds
229 a lot of code.
230 This should be avoided if possible.
231 Hence, the dependencies only change in kind, not in their existence.
232 In mmh, library dependencies on
233 .Pn libsasl2
234 and
235 .Pn libcrypto /\c
236 .Pn libssl
237 were traded against program dependencies on an MSA and an MRA.
238 This also meant trading build-time dependencies against run-time
239 dependencies.
240 Besides program dependencies providing the stronger separation
241 and being more flexible, they also allowed
242 over 6\|000 lines of code to be removed from mmh.
243 This made mmh's code base about 12\|% smaller.
244 Reducing the project's code size by such an amount without actually
245 losing functionality is a convincing argument.
246 Actually, as external MSAs and MRAs are likely superior to the
247 project's internal versions, the common user even gains functionality.
248 .P
249 Users of MH should not have problems to set up an external MSA and MRA.
250 Also, the popular MSAs and MRAs have large communities and a lot
251 of documentation available.
252 Choices for MSAs range from full-featured MTAs like
253 .\" XXX refs
254 .I Postfix
255 over mid-size MTAs like
256 .I masqmail
257 and
258 .I dma
259 to small forwarders like
260 .I ssmtp
261 and
262 .I nullmailer .
263 Choices for MRAs include
264 .I fetchmail ,
265 .I getmail ,
266 .I mpop
267 and
268 .I fdm .
271 .H2 "Non-MUA Tools
272 .P
273 One goal of mmh is to remove the tools that are not part of the MUA's task.
274 Further more, any tools that don't improve the MUA's job significantly
275 should be removed.
276 Loosely related and rarely used tools distract from the lean appearance.
277 They require maintenance work without adding much to the core task.
278 By removing these tools, the project shall become more streamlined
279 and focused.
280 In mmh the following tools are not available anymore:
281 .BU
282 .Pn conflict
283 was removed
284 .Ci 8b235097cbd11d728c07b966cf131aa7133ce5a9
285 because it is a mail system maintenance tool that is not MUA-related.
286 It even checked
287 .Fn /etc/passwd
288 and
289 .Fn /etc/group
290 for consistency, which is completely unrelated to email.
291 A tool like
292 .Pn conflict
293 is surely useful, but it should not be shipped with mmh.
294 .\" XXX historic reasons?
295 .BU
296 .Pn rcvtty
297 was removed
298 .Ci 14767c94b3827be7c867196467ed7aea5f6f49b0
299 because its use case of writing to the user's terminal
300 on receival of mail is obsolete.
301 If users like to be informed of new mail, the shell's
302 .Ev MAILPATH
303 variable or graphical notifications are technically more appealing.
304 Writing directly to terminals is hardly ever wanted today.
305 If though one wants to have it this way, the standard tool
306 .Pn write
307 can be used in a way similar to:
308 .VS
309 scan -file - | write `id -un`
310 VE
311 .BU
312 .Pn viamail
313 .\" XXX was macht viamail
314 was removed
315 .Ci eda72d6a7a7c20ff123043fb7f19c509ea01f932
316 when the new attachment system was activated, because
317 .Pn forw
318 could then cover the task itself.
319 The program
320 .Pn sendfiles
321 was rewritten as a shell script wrapper around
322 .Pn forw .
323 .Ci 0e82199cf3c991a173e0ac8aa776efdb3ded61e6
324 .BU
325 .Pn msgchk
326 .\" XXX was macht msgchk
327 was removed
328 .Ci bb9360ead7eb7a3fedcce2eeedfc660014e41dbe ,
329 because it lost its use case when POP support was removed.
330 A call to
331 .Pn msgchk
332 provided hardly more information than:
333 .VS
334 ls -l /var/mail/meillo
335 VE
336 It did distinguish between old and new mail, but
337 this detail information can be retrieved with
338 .Pn stat (1),
339 too.
340 A small shell script could be written to print the information
341 in a similar way, if truly necessary.
342 As mmh's
343 .Pn inc
344 only incorporates mail from the user's local maildrop,
345 and thus no data transfers over slow networks are involved,
346 there's hardly any need to check for new mail before incorporating it.
347 .BU
348 .Pn msh
349 was removed
350 .Ci 916690191222433a6923a4be54b0d8f6ac01bd02
351 because the tool was in conflict with the philosophy of MH.
352 It provided an interactive shell to access the features of MH,
353 but it wasn't just a shell tailored to the needs of mail handling.
354 Instead it was one large program that had several MH tools built in.
355 This conflicts with the major feature of MH of being a tool chest.
356 .Pn msh 's
357 main use case had been accessing Bulletin Boards, which have ceased to
358 be popular.
359 .P
360 Removing
361 .Pn msh ,
362 together with the truly archaic code relicts
363 .Pn vmh
364 and
365 .Pn wmh ,
366 saved more than 7\|000 lines of C code \(en
367 about 15\|% of the project's original source code amount.
368 Having less code \(en with equal readability, of course \(en
369 for the same functionality is an advantage.
370 Less code means less bugs and less maintenance work.
371 As
372 .Pn rcvtty
373 and
374 .Pn msgchk
375 are assumed to be rarely used and can be implemented in different ways,
376 why should one keep them?
377 Removing them streamlines mmh.
378 .Pn viamail 's
379 use case is now partly obsolete and partly covered by
380 .Pn forw ,
381 hence there's no reason to still maintain it.
382 .Pn conflict
383 is not related to the mail client, and
384 .Pn msh
385 conflicts with the basic concept of MH.
386 Theses two tools might still be useful, but they should not be part of mmh.
387 .P
388 Finally, there's
389 .Pn slocal .
390 .Pn slocal
391 is an MDA and thus not directly MUA-related.
392 It should be removed from mmh, because including it conflicts with
393 the idea that mmh is a MUA only.
394 .Pn slocal
395 should rather become a separate project.
396 However,
397 .Pn slocal
398 provides rule-based processing of messages, like filing them into
399 different folders, which is otherwise not available in mmh.
400 Although
401 .Pn slocal
402 does neither pull in dependencies nor does it include a separate
403 technical area (cf. Sec.
404 .Cf mail-transfer-facilities ),
405 still,
406 it accounts for about 1\|000 lines of code that need to be maintained.
407 As
408 .Pn slocal
409 is almost self-standing, it should be split off into a separate project.
410 This would cut the strong connection between the MUA mmh and the MDA
411 .Pn slocal .
412 For anyone not using MH,
413 .Pn slocal
414 would become yet another independent MDA, like
415 .I procmail .
416 Then
417 .Pn slocal
418 could be installed without the complete MH system.
419 Likewise, mmh users could decide to use
420 .I procmail
421 without having a second, unused MDA,
422 .Pn slocal ,
423 installed.
424 That appears to be conceptionally the best solution.
425 Yet,
426 .Pn slocal
427 is not split off.
428 I defer the decision over
429 .Pn slocal
430 in need for deeper investigation.
431 In the meanwhile, it remains part of mmh.
432 However, its continued existence is not significant because
433 .Pn slocal
434 is unrelated to the rest of the project.
438 .H2 "Displaying Messages
439 .Id mhshow
440 .P
441 Since the very beginning, already in the first concept paper,
442 .\" XXX ref!!!
443 .Pn show
444 had been MH's message display program.
445 .Pn show
446 mapped message numbers and sequences to files and invoked
447 .Pn mhl
448 to have the files formatted.
449 With MIME, this approach wasn't sufficient anymore.
450 MIME messages can consist of multiple parts. Some parts are not
451 directly displayable and text content might be encoded in
452 foreign charsets.
453 .Pn show 's
454 understanding of messages and
455 .Pn mhl 's
456 display capabilities couldn't cope with the task any longer.
457 .P
458 Instead of extending these tools, additional tools were written from
459 scratch and added to the MH tool chest.
460 Doing so is encouraged by the tool chest approach.
461 Modular design is a great advantage for extending a system,
462 as new tools can be added without interfering with existing ones.
463 First, the new MIME features were added in form of the single program
464 .Pn mhn .
465 The command
466 .Cl "mhn -show 42
467 would show the MIME message numbered 42.
468 With the 1.0 release of nmh in February 1999, Richard Coleman finished
469 the split of
470 .Pn mhn
471 into a set of specialized tools, which together covered the
472 multiple aspects of MIME.
473 One of them was
474 .Pn mhshow ,
475 which replaced
476 .Cl "mhn -show" .
477 It was capable of displaying MIME messages appropriately.
478 .P
479 From then on, two message display tools were part of nmh,
480 .Pn show
481 and
482 .Pn mhshow .
483 To ease the life of users,
484 .Pn show
485 was extended to automatically hand the job over to
486 .Pn mhshow
487 if displaying the message would be beyond
488 .Pn show 's
489 abilities.
490 In consequence, the user would simply invoke
491 .Pn show
492 (possibly through
493 .Pn next
494 or
495 .Pn prev )
496 and get the message printed with either
497 .Pn show
498 or
499 .Pn mhshow ,
500 whatever was more appropriate.
501 .P
502 Having two similar tools for essentially the same task is redundant.
503 Usually,
504 users wouldn't distinguish between
505 .Pn show
506 and
507 .Pn mhshow
508 in their daily mail reading.
509 Having two separate display programs was therefore mainly unnecessary
510 from a user's point of view.
511 Besides, the development of both programs needed to be in sync,
512 to ensure that the programs behaved in a similar way,
513 because they were used like a single tool.
514 Different behavior would have surprised the user.
515 .P
516 Today, non-MIME messages are rather seen to be a special case of
517 MIME messages, although it is the other way round.
518 As
519 .Pn mhshow
520 had already been able to display non-MIME messages, it appeared natural
521 to drop
522 .Pn show
523 in favor of using
524 .Pn mhshow
525 exclusively.
526 .Ci 4c1efddfd499300c7e74263e57d8aa137e84c853
527 Removing
528 .Pn show
529 is no loss in function, because functionally
530 .Pn mhshow
531 covers it completely.
532 The old behavior of
533 .Pn show
534 can still be emulated with the simple command line:
535 .VS
536 mhl `mhpath c`
537 VE
538 .P
539 For convenience,
540 .Pn mhshow
541 was renamed to
542 .Pn show
543 after
544 .Pn show
545 was gone.
546 It is clear that such a rename may confuse future developers when
547 trying to understand the history.
548 Nevertheless, I consider the convenience on the user's side,
549 to call
550 .Pn show
551 when they want a message to be displayed, to outweigh the inconvenience
552 on the developer's side when understanding the project history.
553 .P
554 To prepare for the transition,
555 .Pn mhshow
556 was reworked to behave more like
557 .Pn show
558 first.
559 (cf. Sec.
560 .Cf mhshow )
561 .\" XXX code commits?
562 Once the tools behaved more alike, the replacing appeared to be
563 even more natural.
564 Today, mmh's new
565 .Pn show
566 has become the one single message display program once more,
567 with the difference
568 that today it handles MIME messages as well as non-MIME messages.
569 The outcome of the transition is one program less to maintain,
570 no second display program for users to deal with,
571 and less system complexity.
572 .P
573 Still, removing the old
574 .Pn show
575 hurts in one regard: It had been such a simple program.
576 Its lean elegance is missing from the new
577 .Pn show ,
578 .\" XXX
579 however there is no alternative;
580 supporting MIME demands higher essential complexity.
582 .ig
583 XXX
584 Consider including text on scan listings here
586 Scan listings shall not contain body content. Hence, removed this feature.
587 Scan listings shall operator on message headers and non-message information
588 only. Displaying the beginning of the body complicates everything too much.
589 That's no surprise, because it's something completely different. If you
590 want to examine the body, then use show(1)/mhshow(1).
591 Changed the default scan formats accordingly.
592 .Ci 70b2643e0da8485174480c644ad9785c84f5bff4
593 ..
598 .H2 "Configure Options
599 .P
600 Customization is a double-edged sword.
601 It allows better suiting setups, but not for free.
602 There is the cost of code complexity to be able to customize.
603 There is the cost of less tested setups, because there are
604 more possible setups and especially corner-cases.
605 Additionally, there is the cost of choice itself.
606 The code complexity directly affects the developers.
607 Less tested code affects both, users and developers.
608 The problem of choice affects the users, for once by having to choose,
609 but also by more complex interfaces that require more documentation.
610 Whenever options add few advantages but increase the complexity of the
611 system, they should be considered for removal.
612 I have reduced the number of project-specific configure options from
613 fifteen to three.
615 .U3 "Mail Transfer Facilities
616 .P
617 With the removal of the mail transfer facilities five configure
618 options vanished:
619 .P
620 The switches
621 .Sw --with-tls
622 and
623 .Sw --with-cyrus-sasl
624 had activated the support for transfer encryption and authentication.
625 .\" XXX cf
626 .\" XXX gruende kurz wiederholen
627 This is not needed anymore.
628 .Ci fecd5d34f65597a4dfa16aeabea7d74b191532c3
629 .Ci 156d35f6425bea4c1ed3c4c79783dc613379c65b
630 .P
631 .\" XXX cf
632 .\" XXX ``For the same reason ...''
633 The configure switch
634 .Sw --enable-pop
635 activated the message retrieval facility.
636 The code area that would be conditionally compiled in for TLS and SASL
637 support had been small.
638 The conditionally compiled code area for POP support had been much larger.
639 Whereas the code base changes would only slightly change on toggling
640 TLS or SASL support, it changed much on toggling POP support.
641 The changes in the code base could hardly be overviewed.
642 By having POP support togglable, a second code base had been created,
643 one that needed to be tested.
644 This situation is basically similar for the conditional TLS and SASL
645 code, but there the changes are minor and can yet be overviewed.
646 Still, conditional compilation of a code base creates variations
647 of the original program.
648 More variations require more testing and maintenance work.
649 .P
650 Two other options only specified default configuration values:
651 .Sw --with-mts
652 defined the default transport service.
653 .Ci f6aa95b724fd8c791164abe7ee5468bf5c34f226
654 With
655 .Sw --with-smtpservers
656 default SMTP servers could be specified.
657 .Ci 128545e06224233b7e91fc4c83f8830252fe16c9
658 Both of them became irrelevant when the SMTP transport service was removed.
659 .\" XXX code ref
660 In mmh, all messages are handed over to
661 .Pn sendmail
662 for transportation.
665 .U3 "Backup Prefix
666 .P
667 The backup prefix is the string that was prepended to message
668 filenames to tag them as deleted.
669 By default it had been the comma character `\f(CW,\fP'.
670 .\" XXX Zeitlich ordnen
671 In July 2000, Kimmo Suominen introduced
672 the configure option
673 .Sw --with-hash-backup
674 to change the default to the hash symbol `\f(CW#\fP'.
675 The choice was probably personal preference, because first, the
676 option was named
677 .Sw --with-backup-prefix.
678 and had the prefix symbol as argument.
679 But giving the hash symbol as argument caused too many problems
680 for Autoconf,
681 thus the option was limited to use the hash symbol as the default prefix.
682 This supports the assumption, that the choice for the hash was
683 personal preference only.
684 Being related or not, words that start with the hash symbol
685 introduce a comment in the Unix shell.
686 Thus, the command line
687 .Cl "rm #13 #15
688 calls
689 .Pn rm
690 without arguments because the first hash symbol starts the comment
691 that reaches until the end of the line.
692 To delete the backup files,
693 .Cl "rm ./#13 ./#15"
694 needs to be used.
695 Using the hash as backup prefix can be seen as a precaution against
696 data loss.
697 .P
698 First, I removed the configure option but added the profile entry
699 .Pe backup-prefix ,
700 which allows to specify an arbitrary string as backup prefix.
701 .Ci 6c40d481d661d532dd527eaf34cebb6d3f8ed086
702 Profile entries are the common method to change mmh's behavior.
703 This change did not remove the choice but moved it to a location where
704 it suited better.
705 .P
706 Eventually, however, the new trash folder concept
707 (cf. Sec.
708 .Cf trash-folder )
709 removed the need for the backup prefix completely.
710 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
711 .Ci ca0b3e830b86700d9e5e31b1784de2bdcaf58fc5
714 .U3 "Editor and Pager
715 .P
716 The two configure options
717 .CW --with-editor=EDITOR
718 .CW --with-pager=PAGER
719 were used to specify the default editor and pager at configure time.
720 Doing so at configure time made sense in the eighties,
721 when the set of available editors and pagers varied much across
722 different systems.
723 Today, the situation is more homogeneous.
724 The programs
725 .Pn vi
726 and
727 .Pn more
728 can be expected to be available on every Unix system,
729 as they are specified by POSIX since two decades.
730 (The specifications for
731 .Pn vi
732 and
733 .Pn more
734 appeared in
735 .[
736 posix 1987
737 .]
738 and,
739 .[
740 posix 1992
741 .]
742 respectively.)
743 As a first step, these two tools were hard-coded as defaults.
744 .Ci 5d43a99db70c12a673028c7758c20cbe3e13ef5f
745 Not changed were the
746 .Pe editor
747 and
748 .Pe moreproc
749 profile entries, which allowed the user to override the system defaults.
750 Later, the concept was reworked to respect the standard environment
751 variables
752 .Ev VISUAL
753 and
754 .Ev PAGER
755 if they are set.
756 Today, mmh determines the editor to use in the following order,
757 taking the first available and non-empty item:
758 .IP (1)
759 Environment variable
760 .Ev MMHEDITOR
761 .IP (2)
762 Profile entry
763 .Pe Editor
764 .IP (3)
765 Environment variable
766 .Ev VISUAL
767 .IP (4)
768 Environment variable
769 .Ev EDITOR
770 .IP (5)
771 Command
772 .Pn vi .
773 .P
774 .Ci f85f4b7ae62e3d05a945dcd46ead51f0a2a89a9b
775 .P
776 The pager to use is determined in a similar order,
777 also taking the first available and non-empty item:
778 .IP (1)
779 Environment variable
780 .Ev MMHPAGER
781 .IP (2)
782 Profile entry
783 .Pe Pager
784 (replaces
785 .Pe moreproc )
786 .IP (3)
787 Environment variable
788 .Ev PAGER
789 .IP (4)
790 Command
791 .Pn more .
792 .P
793 .Ci 0c4214ea2aec6497d0d67b436bbee9bc1d225f1e
794 .P
795 By respecting the
796 .Ev VISUAL /\c
797 .Ev EDITOR
798 and
799 .Ev PAGER
800 environment variables,
801 the new behavior confirms better to the common style on Unix systems.
802 Additionally, the new approach is more uniform and clearer to users.
805 .U3 "ndbm
806 .P
807 .Pn slocal
808 used to depend on
809 .I ndbm ,
810 a database library.
811 The database is used to store the `\fLMessage-ID\fP's of all
812 messages delivered.
813 This enables
814 .Pn slocal
815 to suppress delivering the same message to the same user twice.
816 (This features was enabled by the
817 .Sw -suppressdup
818 switch.)
819 .P
820 A variety of versions of the database library exist.
821 .[
822 wolter unix incompat notes dbm
823 .]
824 Complicated autoconf code was needed to detect them correctly.
825 Further more, the configure switches
826 .Sw --with-ndbm=ARG
827 and
828 .Sw --with-ndbmheader=ARG
829 were added to help with difficult setups that would
830 not be detected automatically or correctly.
831 .P
832 By removing the suppress duplicates feature of
833 .Pn slocal ,
834 the dependency on
835 .I ndbm
836 vanished and 120 lines of complex autoconf code could be saved.
837 .Ci ecd6d6a20cb7a1507e3a20d6c4cb3a1cf14c6bbf
838 The change removed functionality too, but that is minor to the
839 improvement by dropping the dependency and the complex autoconf code.
840 .\" XXX argument: slocal ist sowieso nicht teil vom mmh kern
842 .U3 "mh-e Support
843 .P
844 The configure option
845 .Sw --disable-mhe
846 was removed when the mh-e support was reworked.
847 Mh-e is the Emacs front-end to MH.
848 It requires MH to provide minor additional functions.
849 The
850 .Sw --disable-mhe
851 configure option could switch these extensions off.
852 After removing the support for old versions of mh-e,
853 only the
854 .Sw -build
855 switches of
856 .Pn forw
857 and
858 .Pn repl
859 are left to be mh-e extensions.
860 They are now always built in because they add little code and complexity.
861 In consequence, the
862 .Sw --disable-mhe
863 configure option was removed
864 .Ci a7ce7b4a580d77b6c2c4d980812beb589aa4c643
865 Removing the option removed a second code setup that would have
866 needed to be tested.
867 .\" XXX datum?
868 This change was first done in nmh and thereafter merged into mmh.
869 .P
870 The interface changes in mmh require mh-e to be adjusted in order
871 to be able to use mmh as back-end.
872 This will require minor changes to mh-e, but removing the
873 .Sw -build
874 switches would require more rework.
876 .U3 "Masquerading
877 .P
878 The configure option
879 .Sw --enable-masquerade
880 could take up to three arguments:
881 `draft_from', `mmailid', and `username_extension'.
882 They activated different types of address masquerading.
883 All of them were implemented in the SMTP-speaking
884 .Pn post
885 command, which provided an MSA.
886 Address masquerading is an MTA's task and mmh does not cover
887 this field anymore.
888 Hence, true masquerading needs to be implemented in the external MTA.
889 .P
890 The
891 .I mmailid
892 masquerading type is the oldest one of the three and the only one
893 available in the original MH.
894 It provided a
895 .I username
896 to
897 .I fakeusername
898 mapping, based on the password file's GECOS field.
899 The man page
900 .Mp mh-tailor(5)
901 described the use case as being the following:
902 .QS
903 This is useful if you want the messages you send to always
904 appear to come from the name of an MTA alias rather than your
905 actual account name. For instance, many organizations set up
906 `First.Last' sendmail aliases for all users. If this is
907 the case, the GECOS field for each user should look like:
908 ``First [Middle] Last <First.Last>''
909 .QE
910 .P
911 As mmh sends outgoing mail via the local MTA only,
912 the best location to do such global rewrites is there.
913 Besides, the MTA is conceptionally the right location because it
914 does the reverse mapping for incoming mail (aliasing), too.
915 Further more, masquerading set up there is readily available for all
916 mail software on the system.
917 Hence, mmailid masquerading was removed.
918 .Ci 0836c8000ccb34b59410ef1c15b1b7feac70ce5f
919 .P
920 The
921 .I username_extension
922 masquerading type did not replace the username but would append a suffix,
923 specified by the
924 .Ev USERNAME_EXTENSION
925 environment variable, to it.
926 This provided support for the
927 .I user-extension
928 feature of qmail and the similar
929 .I "plussed user
930 processing of sendmail.
931 The decision to remove this username_extension masquerading was
932 motivated by the fact that
933 .Pn spost
934 hadn't supported it already.
935 .Ci 2abae0bfd0ad5bf898461e50aa4b466d641f23d9
936 Username extensions are possible in mmh, but less convenient to use.
937 .\" XXX covered by next paragraph
938 .\" XXX format file %(getenv USERNAME_EXTENSION)
939 .P
940 The
941 .I draft_from
942 masquerading type instructed
943 .Pn post
944 to use the value of the
945 .Hd From
946 header field as SMTP envelope sender.
947 Sender addresses could be replaced completely.
948 .Ci b14ea6073f77b4359aaf3fddd0e105989db9
949 Mmh offers a kind of masquerading similar in effect, but
950 with technical differences.
951 As mmh does not transfer messages itself, the local MTA has final control
952 over the sender's address. Any masquerading mmh introduces may be reverted
953 by the MTA.
954 In times of pedantic spam checking, an MTA will take care to use
955 sensible envelope sender addresses to keep its own reputation up.
956 Nonetheless, the MUA can set the
957 .Hd From
958 header field and thereby propose
959 a sender address to the MTA.
960 The MTA may then decide to take that one or generate the canonical sender
961 address for use as envelope sender address.
962 .P
963 In mmh, the MTA will always extract the recipient and sender from the
964 message header (\c
965 .Pn sendmail 's
966 .Sw -t
967 switch).
968 The
969 .Hd From
970 header field of the draft may be set arbitrary by the user.
971 If it is missing, the canonical sender address will be generated by the MTA.
973 .U3 "Remaining Options
974 .P
975 Two configure options remain in mmh.
976 One is the locking method to use:
977 .Sw --with-locking=[dot|fcntl|flock|lockf] .
978 The idea of removing all methods except the portable dot locking
979 and having that one as the default is appealing, but this change
980 requires deeper technical investigation into the topic.
981 The other option,
982 .Sw --enable-debug ,
983 compiles the programs with debugging symbols and does not strip them.
984 This option is likely to stay.
989 .H2 "Command Line Switches
990 .P
991 The command line switches of MH tools follow the X Window style.
992 They are words, introduced by a single dash.
993 For example:
994 .Cl "-truncate" .
995 Every program in mmh has two generic switches:
996 .Sw -help ,
997 to print a short message on how to use the program, and
998 .Sw -Version
999 (with capital `V'), to tell what version of mmh the program belongs to.
1000 .P
1001 Switches change the behavior of programs.
1002 Programs that do one thing in one way require no switches.
1003 In most cases, doing something in exactly one way is too limiting.
1004 If there is basically one task to accomplish, but it should be done
1005 in various ways, switches are a good approach to alter the behavior
1006 of a program.
1007 Changing the behavior of programs provides flexibility and customization
1008 to users, but at the same time it complicates the code, documentation and
1009 usage of the program.
1010 .\" XXX: Ref
1011 Therefore, the number of switches should be kept small.
1012 A small set of well-chosen switches does no harm.
1013 But usually, the number of switches increases over time.
1014 Already in 1985, Rose and Romine have identified this as a major
1015 problem of MH:
1016 .[ [
1017 rose romine real work
1018 .], p. 12]
1019 .QS
1020 A complaint often heard about systems which undergo substantial development
1021 by many people over a number of years, is that more and more options are
1022 introduced which add little to the functionality but greatly increase the
1023 amount of information a user needs to know in order to get useful work done.
1024 This is usually referred to as creeping featurism.
1025 .QP
1026 Unfortunately MH, having undergone six years of off-and-on development by
1027 ten or so well-meaning programmers (the present authors included),
1028 suffers mightily from this.
1029 .QE
1030 .P
1031 Being reluctant to adding new switches \(en or `options',
1032 as Rose and Romine call them \(en is one part of a counter-action,
1033 the other part is removing hardly used switches.
1034 Nmh's tools had lots of switches already implemented,
1035 hence, cleaning up by removing some of them was the more important part
1036 of the counter-action.
1037 Removing existing functionality is always difficult because it
1038 breaks programs that use these functions.
1039 Also, for every obsolete feature, there'll always be someone who still
1040 uses it and thus opposes its removal.
1041 This puts the developer into the position,
1042 where sensible improvements to style are regarded as destructive acts.
1043 Yet, living with the featurism is far worse, in my eyes, because
1044 future needs will demand adding further features,
1045 worsening the situation more and more.
1046 Rose and Romine added in a footnote,
1047 ``[...]
1048 .Pn send
1049 will no doubt acquire an endless number of switches in the years to come.''
1050 Although clearly humorous, the comment points to the nature of the problem.
1051 Refusing to add any new switches would encounter the problem at its root,
1052 but this is not practical.
1053 New needs will require new switches and it would be unwise to block
1054 them strictly.
1055 Nevertheless, removing obsolete switches still is an effective approach
1056 to deal with the problem.
1057 Working on an experimental branch without an established user base,
1058 eased my work because I did not offend users when I removed existing
1059 functions.
1060 .P
1061 Rose and Romine counted 24 visible and 9 more hidden switches for
1062 .Pn send .
1063 In nmh, they increased up to 32 visible and 12 hidden ones.
1064 At the time of writing, no more than 7 visible switches and 1 hidden switch
1065 have remained in mmh's
1066 .Pn send .
1067 (These numbers include two generic switches, help and version.)
1068 .P
1069 The figure displays the number of switches for each of the tools
1070 that is available in both nmh and mmh.
1071 The tools are sorted by the number of switches they had in nmh.
1072 Visible and hidden switches were counted,
1073 but not the generic help and version switches.
1074 Whereas in the beginning of the project, the average tool had 11 switches,
1075 now it has no more than 5 \(en only half as many.
1076 If the `no' switches and similar inverse variant are folded onto
1077 their counter-parts, the average tool had 8 switches in pre-mmh times and
1078 has 4 now.
1079 The total number of functional switches in mmh dropped from 465
1080 to 234.
1082 .KS
1083 .in 1c
1084 .so input/switches.grap
1085 .KE
1087 .P
1088 A part of the switches vanished after functions were removed.
1089 This was the case for network mail transfer, for instance.
1090 Sometimes, however, the work flow was the other way:
1091 I looked through the
1092 .Mp mh-chart (7)
1093 man page to identify the tools with apparently too many switches.
1094 Then considering the value of each of the switches by examining
1095 the tool's man page and source code, aided by recherche and testing.
1096 This way, the removal of functions was suggested by the aim to reduce
1097 the number of switches per command.
1100 .U3 "Draft Folder Facility
1101 .P
1102 A change early in the project was the complete transition from
1103 the single draft message to the draft folder facility.
1104 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
1105 .\" XXX ref to section ...
1106 The draft folder facility was introduced in the mid-eighties, when
1107 Rose and Romine called it a ``relatively new feature''.
1108 .[
1109 rose romine real work
1110 .]
1111 Since then, the facility had existed but was inactive by default.
1112 The default activation and the related rework of the tools made it
1113 possible to remove the
1114 .Sw -[no]draftfolder ,
1115 and
1116 .Sw -draftmessage
1117 switches from
1118 .Pn comp ,
1119 .Pn repl ,
1120 .Pn forw ,
1121 .Pn dist ,
1122 .Pn whatnow ,
1123 and
1124 .Pn send .
1125 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
1126 The only flexibility removed with this change is having multiple
1127 draft folders within one profile.
1128 I consider this a theoretical problem only.
1129 At the same time, the
1130 .Sw -draft
1131 switch of
1132 .Pn anno ,
1133 .Pn refile ,
1134 and
1135 .Pn send
1136 was removed.
1137 The special treatment of \fIthe\fP draft message became irrelevant after
1138 the rework of the draft system.
1139 (cf. Sec.
1140 .Cf draft-folder )
1141 Furthermore,
1142 .Pn comp
1143 no longer needs a
1144 .Sw -file
1145 switch as the draft folder facility together with the
1146 .Sw -form
1147 switch are sufficient.
1150 .U3 "In Place Editing
1151 .P
1152 .Pn anno
1153 had the switches
1154 .Sw -[no]inplace
1155 to either annotate the message in place and thus preserve hard links,
1156 or annotate a copy to replace the original message, breaking hard links.
1157 Following the assumption that linked messages should truly be the
1158 same message, and annotating it should not break the link, the
1159 .Sw -[no]inplace
1160 switches were removed and the previous default
1161 .Sw -inplace
1162 was made the only behavior.
1163 .Ci c8195849d2e366c569271abb0f5f60f4ebf0b4d0
1164 The
1165 .Sw -[no]inplace
1166 switches of
1167 .Pn repl ,
1168 .Pn forw ,
1169 and
1170 .Pn dist
1171 could be removed, too, as they were simply passed through to
1172 .Pn anno .
1173 .P
1174 .Pn burst
1175 also had
1176 .Sw -[no]inplace
1177 switches, but with different meaning.
1178 With
1179 .Sw -inplace ,
1180 the digest had been replaced by the table of contents (i.e. the
1181 introduction text) and the burst messages were placed right
1182 after this message, renumbering all following messages.
1183 Also, any trailing text of the digest was lost, though,
1184 in practice, it usually consists of an end-of-digest marker only.
1185 Nontheless, this behavior appeared less elegant than the
1186 .Sw -noinplace
1187 behavior, which already had been the default.
1188 Nmh's
1189 .Mp burst (1)
1190 man page reads:
1191 .QS
1192 If
1193 .Sw -noinplace
1194 is given, each digest is preserved, no table
1195 of contents is produced, and the messages contained within
1196 the digest are placed at the end of the folder. Other messages
1197 are not tampered with in any way.
1198 .QE
1199 .LP
1200 The decision to drop the
1201 .Sw -inplace
1202 behavior was supported by the code complexity and the possible data loss
1203 it caused.
1204 .Sw -noinplace
1205 was chosen to be the definitive behavior.
1206 .Ci 68a686adeb39223a5e1ad35e4a24890ec053679d
1209 .U3 "Forms and Format Strings
1210 .P
1211 Historically, the tools that had
1212 .Sw -form
1213 switches to supply a form file had
1214 .Sw -format
1215 switches as well to supply the contents of a form file as a string
1216 on the command line directly.
1217 In consequence, the following two lines equaled:
1218 .VS
1219 scan -form scan.mailx
1220 scan -format "`cat .../scan.mailx`"
1221 VE
1222 The
1223 .Sw -format
1224 switches were dropped in favor for extending the
1225 .Sw -form
1226 switches.
1227 .Ci f51956be123db66b00138f80464d06f030dbb88d
1228 If their argument starts with an equal sign (`='),
1229 then the rest of the argument is taken as a format string,
1230 otherwise the arguments is treated as the name of a format file.
1231 Thus, now the following two lines equal:
1232 .VS
1233 scan -form scan.mailx
1234 scan -form "=`cat .../scan.mailx`"
1235 VE
1236 This rework removed the prefix collision between
1237 .Sw -form
1238 and
1239 .Sw -format .
1240 Now, typing
1241 .Sw -fo
1242 suffices to specify form or format string.
1243 .P
1244 The different meaning of
1245 .Sw -format
1246 for
1247 .Pn repl
1248 and
1249 .Pn forw
1250 was removed in mmh.
1251 .Pn forw
1252 was completely switched to MIME-type forwarding, thus removing the
1253 .Sw -[no]format .
1254 .Ci 6e271608b7b9c23771523f88d23a4d3593010cf1
1255 For
1256 .Pn repl ,
1257 the
1258 .Sw -[no]format
1259 switches were reworked to
1260 .Sw -[no]filter
1261 switches.
1262 .Ci 67411b1f95d6ec987b4c732459e1ba8a8ac192c6
1263 The
1264 .Sw -format
1265 switches of
1266 .Pn send
1267 and
1268 .Pn post ,
1269 which had a third meaning,
1270 were removed likewise.
1271 .Ci f3cb7cde0e6f10451b6848678d95860d512224b9
1272 Eventually, the ambiguity of the
1273 .Sw -format
1274 switches was resolved by not anymore having any such switch in mmh.
1277 .U3 "MIME Tools
1278 .P
1279 The MIME tools, which were once part of
1280 .Pn mhn
1281 .\" XXX
1282 (whatever that stood for),
1283 had several switches that added little practical value to the programs.
1284 The
1285 .Sw -[no]realsize
1286 switches of
1287 .Pn mhbuild
1288 and
1289 .Pn mhlist
1290 were removed, doing real size calculations always now
1291 .Ci 8d8f1c3abc586c005c904e52c4adbfe694d2201c ,
1292 as nmh's
1293 .Mp mhbuild (1)
1294 man page states
1295 ``This provides an accurate count at the expense of a small delay.''
1296 This small delay is not noticable on modern systems.
1297 .P
1298 The
1299 .Sw -[no]check
1300 switches were removed together with the support for
1301 .Hd Content-MD5
1302 header fields.
1303 .[
1304 rfc 1864
1305 .]
1306 .Ci 31dc797eb5178970d68962ca8939da3fd9a8efda
1307 (cf. Sec.
1308 .Cf content-md5 )
1309 .P
1310 The
1311 .Sw -[no]ebcdicsafe
1312 and
1313 .Sw -[no]rfc934mode
1314 switches of
1315 .Pn mhbuild
1316 were removed because they are considered obsolete.
1317 .Ci 01a3480928da485b4d6109d36d751dfa71799d58
1318 .Ci 3363e2624dce0eb8164cf8b3f1ab385c8ff72e88
1319 .P
1320 Content caching of external MIME parts, activated with the
1321 .Sw -rcache
1322 and
1323 .Sw -wcache
1324 switches was completely removed.
1325 .Ci d1fefd9f614e4dc3cda16da6c69133c1b2005269
1326 External MIME parts are rare today, having a caching facility
1327 for them appears to be unnecessary.
1328 .P
1329 In pre-MIME times,
1330 .Pn mhl
1331 had covered many tasks that are part of MIME handling today.
1332 Therefore,
1333 .Pn mhl
1334 could be simplified to a large extend, reducing the number of its
1335 switches from 21 to 6.
1336 .Ci 350ad6d3542a07639213cf2a4fe524e829c1e7b6
1337 .Ci 0e46503be3c855bddaeae3843e1b659279c35d70
1342 .U3 "Header Printing
1343 .P
1344 .Pn folder 's
1345 data output is self-explaining enough that
1346 displaying the header line makes little sense.
1347 Hence, the
1348 .Sw -[no]header
1349 switch was removed and headers are never printed.
1350 .Ci 601cc73d1fa05ce96faa728f036d6c51b91701c7
1351 .P
1352 In
1353 .Pn mhlist ,
1354 the
1355 .Sw -[no]header
1356 switches were removed, too.
1357 .Ci b24f96523aaf60e44e04a3ffb1d22e69a13a602f
1358 But in this case headers are always printed,
1359 because the output is not self-explaining.
1360 .P
1361 .Pn scan
1362 also had
1363 .Sw -[no]header
1364 switches.
1365 Printing the header had been sensible until the introduction of
1366 format strings made it impossible to display the column headings.
1367 Only the folder name and the current date remained to be printed.
1368 As this information can be perfectly retrieved by
1369 .Pn folder
1370 and
1371 .Pn date ,
1372 consequently, the switches were removed.
1373 .Ci c477dc5d1d03fa6d9a8ab3dd3508c63cbddc044e
1374 .P
1375 By removing all
1376 .Sw -header
1377 switches, the collision with
1378 .Sw -help
1379 on the first two letters was resolved.
1380 Currently,
1381 .Sw -h
1382 evaluates to
1383 .Sw -help
1384 for all tools of mmh.
1387 .U3 "Suppressing Edits or the Invocation of the WhatNow Shell
1388 .P
1389 The
1390 .Sw -noedit
1391 switch of
1392 .Pn comp ,
1393 .Pn repl ,
1394 .Pn forw ,
1395 .Pn dist ,
1396 and
1397 .Pn whatnow
1398 was removed, but it can now be replaced by specifying
1399 .Sw -editor
1400 with an empty argument.
1401 .Ci 75fca31a5b9d5c1a99c74ab14c94438d8852fba9
1402 (Specifying
1403 .Cl "-editor /bin/true
1404 is nearly the same, only differing by the previous editor being set.)
1405 .P
1406 The more important change is the removal of the
1407 .Sw -nowhatnowproc
1408 switch.
1409 .Ci ee4f43cf2ef0084ec698e4e87159a94c01940622
1410 This switch had introduced an awkward behavior, as explained in nmh's
1411 man page for
1412 .Mp comp (1):
1413 .QS
1414 The
1415 .Sw -editor
1416 .Ar editor
1417 switch indicates the editor to use for
1418 the initial edit. Upon exiting from the editor,
1419 .Pn comp
1420 will invoke the
1421 .Pn whatnow
1422 program. See
1423 .Mp whatnow (1)
1424 for a discussion of available options.
1425 The invocation of this program can be
1426 inhibited by using the
1427 .Sw -nowhatnowproc
1428 switch. (In truth of fact, it is the
1429 .Pn whatnow
1430 program which starts the initial edit.
1431 Hence,
1432 .Sw -nowhatnowproc
1433 will prevent any edit from occurring.)
1434 .QE
1435 .P
1436 Effectively, the
1437 .Sw -nowhatnowproc
1438 switch creates only a draft message.
1439 As
1440 .Cl "-whatnowproc /bin/true
1441 causes the same behavior, the
1442 .Sw -nowhatnowproc
1443 switch was removed for being redundant.
1444 Likely, the
1445 .Sw -nowhatnowproc
1446 switch was intended to be used by front-ends.
1450 .U3 "Various
1451 .BU
1452 With the removal of MMDF maildrop format support,
1453 .Pn packf
1454 and
1455 .Pn rcvpack
1456 no longer needed their
1457 .Sw -mbox
1458 and
1459 .Sw -mmdf
1460 switches.
1461 .Sw -mbox
1462 is the sole behavior now.
1463 .Ci 3916ab66ad5d183705ac12357621ea8661afd3c0
1464 In the same go,
1465 .Pn packf
1466 and
1467 .Pn rcvpack
1468 were reworked and their
1469 .Sw -file
1470 switch became unnecessary.
1471 .Ci ca1023716d4c2ab890696f3e41fa0d94267a940e
1473 .BU
1474 Mmh's tools will no longer clear the screen (\c
1475 .Pn scan 's
1476 and
1477 .Pn mhl 's
1478 .Sw -[no]clear
1479 switches
1480 .Ci e57b17343dcb3ff373ef4dd089fbe778f0c7c270
1481 .Ci 943765e7ac5693ae177fd8d2b5a2440e53ce816e ).
1482 Neither will
1483 .Pn mhl
1484 ring the bell (\c
1485 .Sw -[no]bell
1486 .Ci e11983f44e59d8de236affa5b0d0d3067c192e24 )
1487 nor page the output itself (\c
1488 .Sw -length
1489 .Ci 5b9d883db0318ed2b84bb82dee880d7381f99188 ).
1490 .\" XXX Ref
1491 Generally, the pager to use is no longer specified with the
1492 .Sw -[no]moreproc
1493 command line switches for
1494 .Pn mhl
1495 and
1496 .Pn show /\c
1497 .Pn mhshow .
1498 .Ci 39e87a75b5c2d3572ec72e717720b44af291e88a
1500 .BU
1501 In order to avoid prefix collisions among switch names, the
1502 .Sw -version
1503 switch was renamed to
1504 .Sw -Version
1505 (with capital `V').
1506 .Ci 32b2354dbaf4bf934936eb5b102a4a3d2fdd209a
1507 Every program has the
1508 .Sw -version
1509 switch but its first three letters collided with the
1510 .Sw -verbose
1511 switch, present in many programs.
1512 The rename solved this problem once for all.
1513 Although this rename breaks a basic interface, having the
1514 .Sw -V
1515 abbreviation to display the version information, isn't all too bad.
1517 .BU
1518 .Sw -[no]preserve
1519 of
1520 .Pn refile
1521 was removed
1522 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
1523 because what use was it anyway?
1524 Quoting nmh's man page
1525 .Mp refile (1):
1526 .QS
1527 Normally when a message is refiled, for each destination
1528 folder it is assigned the number which is one above the current
1529 highest message number in that folder. Use of the
1530 .Sw -preserv
1531 [sic!] switch will override this message renaming, and try
1532 to preserve the number of the message. If a conflict for a
1533 particular folder occurs when using the
1534 .Sw -preserve
1535 switch, then
1536 .Pn refile
1537 will use the next available message number which
1538 is above the message number you wish to preserve.
1539 .QE
1541 .BU
1542 The removal of the
1543 .Sw -[no]reverse
1544 switches of
1545 .Pn scan
1546 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
1547 is a bug fix, supported by the comments
1548 ``\-[no]reverse under #ifdef BERK (I really HATE this)''
1549 by Rose and
1550 ``Lists messages in reverse order with the `\-reverse' switch.
1551 This should be considered a bug.'' by Romine in the documentation.
1552 .\" XXX Ref: welche datei genau.
1553 The question remains why neither Rose and Romine had fixed this
1554 bug in the eighties when they wrote these comments nor has anyone
1555 thereafter.
1558 .ig
1560 forw: [no]dashstuffing(mhl)
1562 mhshow: [no]pause [no]serialonly
1564 mhmail: resent queued
1565 inc: snoop, (pop)
1567 mhl: [no]faceproc folder sleep
1568 [no]dashstuffing(forw) digest list volume number issue number
1570 prompter: [no]doteof
1572 refile: [no]preserve [no]unlink [no]rmmproc
1574 send: [no]forward [no]mime [no]msgid
1575 [no]push split [no]unique (sasl) width snoop [no]dashstuffing
1576 attach attachformat
1577 whatnow: (noedit) attach
1579 slocal: [no]suppressdups
1581 spost: [no]filter [no]backup width [no]push idanno
1582 [no]check(whom) whom(whom)
1584 whom: ???
1586 ..
1589 .ig
1591 .P
1592 In the best case, all switches are unambiguous on the first character,
1593 or on the three-letter prefix for the `no' variants.
1594 Reducing switch prefix collisions, shortens the necessary prefix length
1595 the user must type.
1596 Having less switches helps best.
1598 ..
1601 .\" XXX: whatnow prompt commands
1606 .\" --------------------------------------------------------------
1607 .H1 "Modernizing
1608 .P
1609 In the more than thirty years of MH's existence, its code base was
1610 increasingly extended.
1611 New features entered the project and became alternatives to the
1612 existing behavior.
1613 Relicts from several decades have gathered in the code base,
1614 but seldom obsolete features were dropped.
1615 This section describes the removing of old code
1616 and the modernizing of the default setup.
1617 It focuses on the functional aspect only;
1618 the non-functional aspects of code style are discussed in Sec.
1619 .Cf code-style .
1622 .H2 "Code Relicts
1623 .P
1624 My position regarding the removal of obsolete functions of mmh,
1625 .\" XXX ``in order to remove old code,''
1626 is much more revolutional than the nmh community appreciates.
1627 Working on an experimental version, I was quickly able to drop
1628 functionality I considered ancient.
1629 The need for consensus with peers would have slowed this process down.
1630 Without the need to justify my decisions, I was able to rush forward.
1631 In December 2011, Paul Vixie motivated the nmh developers to just
1632 .\" XXX ugs
1633 do the work:
1634 .[
1635 paul vixie edginess nmh-workers
1636 .]
1637 .QS
1638 let's stop walking on egg shells with this code base. there's no need to
1639 discuss whether to keep using vfork, just note in [sic!] passing, [...]
1640 we don't need a separate branch for removing vmh
1641 or ridding ourselves of #ifdef's or removing posix replacement functions
1642 or depending on pure ansi/posix ``libc''.
1643 .QP
1644 these things should each be a day or two of work and the ``main branch''
1645 should just be modern. [...]
1646 let's push forward, aggressively.
1647 .QE
1648 .LP
1649 I did so already in the months before.
1650 I pushed forward.
1651 .\" XXX semicolon ?
1652 I simply dropped the cruft.
1653 .P
1654 The decision to drop a feature was based on literature research and
1655 careful thinking, but whether having had contact with this particular
1656 feature within my own computer life served as a rule of thumb.
1657 I explained my reasons in the commit messages
1658 in the version control system.
1659 Hence, others can comprehend my view and argue for undoing the change
1660 if I have missed an important aspect.
1661 I was quick in dropping parts.
1662 I rather re-included falsely dropped parts than going at a slower pace.
1663 Mmh is experimental work; it required tough decisions.
1664 .\" XXX ``exp. work'' schon oft gesagt
1667 .U3 "Forking
1668 .P
1669 Being a tool chest, MH creates many processes.
1670 In earlier times
1671 .Fu fork()
1672 had been an expensive system call, because the process's image needed
1673 to be completely duplicated at once.
1674 This expensive work was especially unnecessary in the commonly occuring
1675 case wherein the image is replaced by a call to
1676 .Fu exec()
1677 right after having forked the child process.
1678 The
1679 .Fu vfork()
1680 system call was invented to speed up this particular case.
1681 It completely omits the duplication of the image.
1682 On old systems this resulted in significant speed ups.
1683 Therefore MH used
1684 .Fu vfork()
1685 whenever possible.
1686 .P
1687 Modern memory management units support copy-on-write semantics, which make
1688 .Fu fork()
1689 almost as fast as
1690 .Fu vfork() .
1691 The man page of
1692 .Mp vfork (2)
1693 in FreeBSD 8.0 states:
1694 .QS
1695 This system call will be eliminated when proper system sharing mechanisms
1696 are implemented. Users should not depend on the memory sharing semantics
1697 of vfork() as it will, in that case, be made synonymous to fork(2).
1698 .QE
1699 .LP
1700 Vixie supports the removal with the note that ``the last
1701 system on which fork was so slow that an mh user would notice it, was
1702 Eunice. that was 1987''.
1703 .[
1704 nmh-workers vixie edginess
1705 .]
1706 I replaced all calls to
1707 .Fu vfork()
1708 with calls to
1709 .Fu fork() .
1710 .Ci 40821f5c1316e9205a08375e7075909cc9968e7d
1711 .P
1712 Related to the costs of
1713 .Fu fork()
1714 is the probability of its success.
1715 In the eighties, on heavy loaded systems, calls to
1716 .Fu fork()
1717 were prone to failure.
1718 Hence, many of the
1719 .Fu fork()
1720 calls in the code were wrapped into loops to retry the
1721 .Fu fork()
1722 several times, to increase the chances to succeed, eventually.
1723 On modern systems, a failing
1724 .Fu fork()
1725 call is unusual.
1726 Hence, in the rare case when
1727 .Fu fork()
1728 fails, mmh programs simply abort.
1729 .Ci 5fbf37ee68e018998ada61eeab73e035b26834b6
1732 .U3 "Header Fields
1733 .BU
1734 The
1735 .Hd Encrypted
1736 header field was introduced by RFC\|822,
1737 but already marked as legacy in RFC\|2822.
1738 Today, OpenPGP provides the basis for standardized exchange of encrypted
1739 messages [RFC\|4880, RFC\|3156].
1740 Hence, the support for
1741 .Hd Encrypted
1742 header fields is removed in mmh.
1743 .Ci 064527f7b57ab050e5af13e15ad99aeeab125857
1744 .BU
1745 The native support for
1746 .Hd Face
1747 header fields has been removed, as well.
1748 .Ci 8e5be81f784682822f5e868c1bf3c8624682bd23
1749 This feature is similar to the
1750 .Hd X-Face
1751 header field in its intent,
1752 but takes a different approach to store the image.
1753 Instead of encoding the image data directly into the header field,
1754 it contains the hostname and UDP port where the image
1755 date can be retrieved.
1756 There is even a third Face system,
1757 which is the successor of
1758 .Hd X-Face ,
1759 although it re-uses the
1760 .Hd Face
1761 header field.
1762 It was invented in 2005 and supports colored PNG images.
1763 None of the Face systems described here is popular today.
1764 Hence, mmh has no direct support for them.
1765 .BU
1766 .Id content-md5
1767 The
1768 .Hd Content-MD5
1769 header field was introduced by RFC\|1864.
1770 It provides detection of data corruption during the transfer.
1771 But it can not ensure verbatim end-to-end delivery of the contents
1772 [RFC\|1864].
1773 The proper approach to verify content integrity in an
1774 end-to-end relationship is the use of digital signatures.
1775 .\" XXX (RFCs FIXME).
1776 On the other hand, transfer protocols should detect corruption during
1777 the transmission.
1778 The TCP includes a checksum field therefore.
1779 These two approaches in combinations render the
1780 .Hd Content-MD5
1781 header field superfluous.
1782 Not a single one out of 4\|200 messages from two decades
1783 in an nmh-workers mailing list archive contains a
1784 .Hd Content-MD5
1785 header field.
1786 Neither did any of the 60\|000 messages in my personal mail storage.
1787 Removing the support for this header field,
1788 removed the last place where MD5 computation was needed.
1789 .Ci 31dc797eb5178970d68962ca8939da3fd9a8efda
1790 Hence, the MD5 code could be removed as well.
1791 Over 500 lines of code vanished by this one change.
1794 .U3 "MMDF maildrop support
1795 .P
1796 This type of format is conceptionally similar to the mbox format,
1797 but uses a different message delimiter (`\fL\\1\\1\\1\\1\fP',
1798 commonly written as `\fL^A^A^A^A\fP', instead of `\fLFrom\0\fP').
1799 Mbox is the de-facto standard maildrop format on Unix,
1800 whereas the MMDF maildrop format is now forgotten.
1801 By dropping the MMDF maildrop format support,
1802 mbox became the only packed mailbox format supported in mmh.
1803 .P
1804 The simplifications within the code were moderate.
1805 Mainly, the reading and writing of MMDF mailbox files was removed.
1806 But also, switches of
1807 .Pn packf
1808 and
1809 .Pn rcvpack
1810 could be removed.
1811 .Ci 3916ab66ad5d183705ac12357621ea8661afd3c0
1812 In the message parsing function
1813 .Fn sbr/m_getfld.c ,
1814 knowledge of MMDF packed mail boxes was removed.
1815 .Ci 684ec30d81e1223a282764452f4902ed4ad1c754
1816 Further code structure simplifications may be possible there,
1817 because only one single packed mailbox format is left to be supported.
1818 I have not worked on them yet because
1819 .Fu m_getfld()
1820 is heavily optimized and thus dangerous to touch.
1821 The risk of damaging the intricate workings of the optimized code is
1822 too high.
1825 .U3 "Prompter's Control Keys
1826 .P
1827 The program
1828 .Pn prompter
1829 queries the user to fill in a message form.
1830 When used by
1831 .Pn comp
1832 as
1833 .Cl "comp -editor prompter" ,
1834 the resulting behavior is similar to
1835 .Pn mailx .
1836 Apparently,
1837 .Pn prompter
1838 hadn't been touched lately.
1839 Otherwise it's hardly explainable why it
1840 still offered the switches
1841 .Sw -erase
1842 .Ar chr
1843 and
1844 .Sw -kill
1845 .Ar chr
1846 to name the characters for command line editing.
1847 The times when this had been necessary are long time gone.
1848 Today these things work out-of-the-box, and if not, are configured
1849 with the standard tool
1850 .Pn stty .
1851 The switches are removed now
1852 .Ci 0bd9750710cdbab80cfb4036dd87af20afe1552f .
1855 .U3 "Hardcopy Terminal Support
1856 .P
1857 More of a funny anecdote is a check for being connected to a
1858 hardcopy terminal.
1859 It remained in the code until spring 2012, when I finally removed it
1860 .Ci b7764c4a6b71d37918a97594d866258f154017ca .
1861 .P
1862 The check only prevented a pager to be placed between the printing
1863 program (\c
1864 .Pn mhl )
1865 and the terminal.
1866 In nmh, this could have been ensured statically with the
1867 .Sw -nomoreproc
1868 at the command line, too.
1869 In mmh, setting the profile entry
1870 .Pe Pager
1871 or the environment variable
1872 .Ev PAGER
1873 to
1874 .Pn cat
1875 is sufficient.
1880 .H2 "Attachments
1881 .P
1882 The mind model of email attachments is unrelated to MIME.
1883 Although the MIME RFCs (2045 through 2049) define the technical
1884 requirements for having attachments, they do not mention the word
1885 ``attachment''.
1886 Instead of attachments, MIME talks about ``multi-part message bodies''
1887 [RFC\|2045], a more general concept.
1888 Multi-part messages are messages
1889 ``in which one or more different
1890 sets of data are combined in a single body''
1891 [RFC\|2046].
1892 MIME keeps its descriptions generic;
1893 it does not imply specific usage models.
1894 One usage model became prevalent: attachments.
1895 The idea is having a main text document with files of arbitrary kind
1896 attached to it.
1897 In MIME terms, this is a multi-part message having a text part first
1898 and parts of arbitrary type following.
1899 .P
1900 MH's MIME support is a direct implementation of the RFCs.
1901 The perception of the topic described in the RFCs is clearly visible
1902 in MH's implementation.
1903 .\" XXX rewrite ``no idea''.
1904 As a result,
1905 MH had all the MIME features but no idea of attachments.
1906 But users don't need all the MIME features,
1907 they want convenient attachment handling.
1910 .U3 "Composing MIME Messages
1911 .P
1912 In order to improve the situation on the message composing side,
1913 Jon Steinhart had added an attachment system to nmh in 2002.
1914 .Ci 7480dbc14bc90f2d872d434205c0784704213252
1915 In the file
1916 .Fn docs/README-ATTACHMENTS ,
1917 he described his motivation to do so as such:
1918 .QS
1919 Although nmh contains the necessary functionality for MIME message
1920 handing [sic!], the interface to this functionality is pretty obtuse.
1921 There's no way that I'm ever going to convince my partner to write
1922 .Pn mhbuild
1923 composition files!
1924 .QE
1925 .LP
1926 With this change, the mind model of attachments entered nmh.
1927 In the same document:
1928 .QS
1929 These changes simplify the task of managing attachments on draft files.
1930 They allow attachments to be added, listed, and deleted.
1931 MIME messages are automatically created when drafts with attachments
1932 are sent.
1933 .QE
1934 .LP
1935 Unfortunately, the attachment system,
1936 like any new facilities in nmh,
1937 was inactive by default.
1938 .P
1939 During my work in Argentina, I tried to improve the attachment system.
1940 But, because of great opposition in the nmh community,
1941 my patch died as a proposal on the mailing list, after long discussions.
1942 .[
1943 nmh-workers attachment proposal
1944 .]
1945 In January 2012, I extended the patch and applied it to mmh.
1946 .Ci 8ff284ff9167eff8f5349481529332d59ed913b1
1947 In mmh, the attachment system is active by default.
1948 Instead of command line switches, the
1949 .Pe Attachment-Header
1950 profile entry is used to specify
1951 the name of the attachment header field.
1952 It is pre-defined to
1953 .Hd Attach .
1954 .P
1955 To add an attachment to a draft, a header line needs to be added:
1956 .VS
1957 To: bob
1958 Subject: The file you wanted
1959 Attach: /path/to/the/file-bob-wanted
1960 --------
1961 Here it is.
1962 VE
1963 The header field can be added to the draft manually in the editor,
1964 or by using the `attach' command at the WhatNow prompt, or
1965 non-interactively with
1966 .Pn anno :
1967 .VS
1968 anno -append -nodate -component Attach -text /path/to/attachment
1969 VE
1970 Drafts with attachment headers are converted to MIME automatically by
1971 .Pn send .
1972 The conversion to MIME is invisible to the user.
1973 The draft stored in the draft folder is always in source form with
1974 attachment headers.
1975 If the MIMEification fails, for instance because the file to attach
1976 is not accessible, the original draft is not changed.
1977 .P
1978 The attachment system handles the forwarding of messages, too.
1979 If the attachment header value starts with a plus character (`+'),
1980 like in
1981 .Cl "Attach: +bob 30 42" ,
1982 the given messages in the specified folder will be attached.
1983 This allowed to simplify
1984 .Pn forw .
1985 .Ci f41f04cf4ceca7355232cf7413e59afafccc9550
1986 .P
1987 Closely related to attachments is non-ASCII text content,
1988 because it requires MIME too.
1989 In nmh, the user needed to call `mime' at the WhatNow prompt
1990 to have the draft converted to MIME.
1991 This was necessary whenever the draft contained non-ASCII characters.
1992 If the user did not call `mime', a broken message would be sent.
1993 Therefore, the
1994 .Pe automimeproc
1995 profile entry could be specified to have the `mime' command invoked
1996 automatically each time.
1997 Unfortunately, this approach conflicted with attachment system
1998 because the draft would already be in MIME format at the time
1999 when the attachment system wanted to MIMEify it.
2000 To use nmh's attachment system, `mime' must not be called at the
2001 WhatNow prompt and
2002 .Pe automimeproc
2003 must not be set in the profile.
2004 But then the case of non-ASCII text without attachment headers was
2005 not caught.
2006 All in all, the solution was complex and irritating.
2007 My patch from December 2010
2008 .[
2009 nmh-workers attachment proposal
2010 .]
2011 would have simplified the situation.
2012 .P
2013 Mmh's current solution is even more elaborate.
2014 Any necessary MIMEification is done automatically.
2015 There is no `mime' command at the WhatNow prompt anymore.
2016 The draft will be converted automatically to MIME when either an
2017 attachment header or non-ASCII text is present.
2018 Furthermore, the hash character (`#') is not special any more
2019 at line beginnings in the draft message.
2020 .\" XXX REF ?
2021 Users need not concern themselves with the whole topic at all.
2022 .P
2023 Although the new approach does not anymore support arbitrary MIME
2024 compositions directly, the full power of
2025 .Pn mhbuild
2026 can still be accessed.
2027 Given no attachment headers are included, the user can create
2028 .Pn mhbuild
2029 composition drafts like in nmh.
2030 Then, at the WhatNow prompt, he needs to invoke
2031 .Cl "edit mhbuild
2032 to convert it to MIME.
2033 Because the resulting draft does neither contain non-ASCII characters
2034 nor has it attachment headers, the attachment system will not touch it.
2035 .P
2036 The approach taken in mmh is tailored towards today's most common case:
2037 a text part, possibly with attachments.
2038 This case was simplified.
2041 .U3 "MIME Type Guessing
2042 .P
2043 From the programmer's point of view, the use of
2044 .Pn mhbuild
2045 composition drafts had one notable advantage over attachment headers:
2046 The user provides the appropriate MIME types for files to include.
2047 The attachment system needs to find out the correct MIME type itself.
2048 This is a difficult task, yet it spares the user irritating work.
2049 Determining the correct MIME type of content is partly mechanical,
2050 partly intelligent work.
2051 Forcing the user to find out the correct MIME type,
2052 forces him to do partly mechanical work.
2053 Letting the computer do the work, can lead to bad choices for difficult
2054 content.
2055 For mmh, the latter option was chosen.
2056 .P
2057 Determining the MIME type by the suffix of the file name is a dumb
2058 approach, yet it is simple to implement and provides good results
2059 for the common cases.
2060 Mmh implements this approach in the
2061 .Pn print-mimetype
2062 script.
2063 .Ci 4b5944268ea0da7bb30598a27857304758ea9b44
2064 Using it is the default choice.
2065 .P
2066 A far better, though less portable, approach is the use of
2067 .Pn file .
2068 This standard tool tries to determine the type of files.
2069 Unfortunately, its capabilities and accuracy varies from system to system.
2070 Additionally, its output was only intended for human beings,
2071 but not to be used by programs.
2072 It varies much.
2073 Nevertheless, modern versions of GNU
2074 .Pn file ,
2075 which is prevalent on the popular GNU/Linux systems,
2076 provide MIME type output in machine-readable form.
2077 Although this solution is highly system-dependent,
2078 it solves the difficult problem well.
2079 On systems where GNU
2080 .Pn file ,
2081 version 5.04 or higher, is available it should be used.
2082 One needs to specify the following profile entry to do so:
2083 .Ci 3baec236a39c5c89a9bda8dbd988d643a21decc6
2084 .VS
2085 Mime-Type-Query: file -b --mime
2086 VE
2087 .LP
2088 Other versions of
2089 .Pn file
2090 might possibly be usable with wrapper scripts to reformat the output.
2091 The diversity among
2092 .Pn file
2093 implementations is great; one needs to check the local variant.
2094 .P
2095 If no MIME type can be determined, text content gets sent as
2096 `text/plain' and anything else under the generic fall-back type
2097 `application/octet-stream'.
2098 It is not possible in mmh to override the automatic MIME type guessing
2099 for a specific file.
2100 To do so, either the user would need to know in advance for which file
2101 the automatic guessing fails, or the system would require interaction.
2102 I consider both cases impractical.
2103 The existing solution should be sufficient.
2104 If not, the user may always fall back to
2105 .Pn mhbuild
2106 composition drafts and ignore the attachment system.
2109 .U3 "Storing Attachments
2110 .P
2111 Extracting MIME parts of a message and storing them to disk is done by
2112 .Pn mhstore .
2113 The program has two operation modes,
2114 .Sw -auto
2115 and
2116 .Sw -noauto .
2117 With the former one, each part is stored under the filename given in the
2118 MIME part's meta information, if available.
2119 This naming information is usually available for modern attachments.
2120 If no filename is available, this MIME part is stored as if
2121 .Sw -noauto
2122 would have been specified.
2123 In the
2124 .Sw -noauto
2125 mode, the parts are processed according to rules, defined by
2126 .Pe mhstore-store-*
2127 profile entries.
2128 These rules define generic filename templates for storing
2129 or commands to post-process the contents in arbitrary ways.
2130 If no matching rule is available the part is stored under a generic
2131 filename, built from message number, MIME part number, and MIME type.
2132 .P
2133 The
2134 .Sw -noauto
2135 mode had been the default in nmh because it was considered safe,
2136 in contrast to the
2137 .Sw -auto
2138 mode.
2139 In mmh,
2140 .Sw -auto
2141 is not dangerous anymore.
2142 Two changes were necessary:
2143 .BU
2144 Any directory path is removed from the proposed filename.
2145 Thus, the files are always stored in the expected directory.
2146 .Ci 41b6eadbcecf63c9a66aa5e582011987494abefb
2147 .BU
2148 Tar files are not extracted automatically any more.
2149 Thus, the rest of the file system will not be touched.
2150 .Ci 94c80042eae3383c812d9552089953f9846b1bb6
2151 .LP
2152 Now, the outcome of mmh's
2153 .Cl "mhstore -auto
2154 can be foreseen from the output of
2155 .Cl "mhlist -verbose" .
2156 .P
2157 The
2158 .Sw -noauto
2159 mode is seen to be more powerful but less convenient.
2160 On the other hand,
2161 .Sw -auto
2162 is safe now and
2163 storing attachments under their original name is intuitive.
2164 Hence,
2165 .Sw -auto
2166 serves better as the default option.
2167 .Ci 3410b680416c49a7617491af38bc1929855a331d
2168 .P
2169 Files are stored into the directory given by the
2170 .Pe Nmh-Storage
2171 profile entry, if set, or
2172 into the current working directory, otherwise.
2173 Storing to different directories is only possible with
2174 .Pe mhstore-store-*
2175 profile entries.
2176 .P
2177 Still, in both modes, existing files get overwritten silently.
2178 This can be considered a bug.
2179 Yet, each other behavior has its draw-backs, too.
2180 Refusing to replace files requires adding a
2181 .Sw -force
2182 option.
2183 Users will likely need to invoke
2184 .Pn mhstore
2185 a second time with
2186 .Sw -force .
2187 Eventually, only the user can decide in the specific case.
2188 This requires interaction, which I like to avoid if possible.
2189 Appending a unique suffix to the filename is another bad option.
2190 For now, the behavior remains as it is.
2191 .P
2192 In mmh, only MIME parts of type message are special in
2193 .Pn mhstore 's
2194 .Sw -auto
2195 mode.
2196 Instead of storing message/rfc822 parts as files to disk,
2197 they are stored as messages into the current mail folder.
2198 The same applies to message/partial, although the parts are
2199 automatically reassembled beforehand.
2200 MIME parts of type message/external-body are not automatically retrieved
2201 anymore.
2202 Instead, information on how to retrieve them is output.
2203 Not supporting this rare case saved nearly one thousand lines of code.
2204 .Ci 55e1d8c654ee0f7c45b9361ce34617983b454c32
2205 .\" XXX mention somewhere else too: (The profile entry `nmh-access-ftp'
2206 .\" and sbr/ruserpass.c for reading ~/.netrc are gone now.)
2207 `application/octet-stream; type=tar' is not special anymore.
2208 Automatically extracting such MIME parts had been the dangerous part
2209 of the
2210 .Sw -auto
2211 mode.
2212 .Ci 94c80042eae3383c812d9552089953f9846b1bb6
2216 .U3 "Showing MIME Messages
2217 .P
2218 The program
2219 .Pn mhshow
2220 had been written to display MIME messages.
2221 It implemented the conceptional view of the MIME RFCs.
2222 Nmh's
2223 .Pn mhshow
2224 handled each MIME part independently, presenting them separately
2225 to the user.
2226 This does not match today's understanding of email attachments,
2227 where displaying a message is seen to be a single, integrated operation.
2228 Today, email messages are expected to consist of a main text part
2229 plus possibly attachments.
2230 They are not any more seen to be arbitrary MIME hierarchies with
2231 information on how to display the individual parts.
2232 I adjusted
2233 .Pn mhshow 's
2234 behavior to the modern view on the topic.
2235 .P
2236 One should note that this section completely ignores the original
2237 .Pn show
2238 program, because it was not capable to display MIME messages
2239 and is no longer part of mmh.
2240 Although
2241 .Pn mhshow
2242 was renamed to
2243 .Pn show
2244 in mmh, this section uses the name
2245 .Pn mhshow ,
2246 in order to avoid confusion.
2247 .\" XXX ref to other section
2248 .P
2249 In mmh, the basic idea is that
2250 .Pn mhshow
2251 should display a message in one single pager session.
2252 Therefore,
2253 .Pn mhshow
2254 invokes a pager session for all its output,
2255 whenever it prints to a terminal.
2256 .Ci a4197ea6ffc5c1550e8b52d5a654bcaaaee04a4e
2257 In consequence,
2258 .Pn mhl
2259 does no more invoke a pager.
2260 .Ci 0e46503be3c855bddaeae3843e1b659279c35d70
2261 With
2262 .Pn mhshow
2263 replacing the original
2264 .Pn show ,
2265 output from
2266 .Pn mhl
2267 does not go to the terminal directly, but through
2268 .Pn mhshow .
2269 Hence,
2270 .Pn mhl
2271 does not need to invoke a pager.
2272 The one and only job of
2273 .Pn mhl
2274 is to format messages or parts of them.
2275 The only place in mmh, where a pager is invoked is
2276 .Pn mhshow .
2277 .P
2278 .Pe mhshow-show-*
2279 profile entries can be used to display MIME parts in a specific way.
2280 For instance, PDF and Postscript files could be converted to plain text
2281 to display them in the terminal.
2282 In mmh, the displaying of MIME parts will always be done serially.
2283 The request to display the MIME type `multipart/parallel' in parallel
2284 is ignored.
2285 It is simply treated as `multipart/mixed'.
2286 .Ci d0581ba306a7299113a346f9b4c46ce97bc4cef6
2287 This could already be requested with the, now removed,
2288 .Sw -serialonly
2289 switch of
2290 .Pn mhshow .
2291 As MIME parts are always processed exclusively , i.e. serially,
2292 the `%e' escape in
2293 .Pe mhshow-show-*
2294 profile entries became useless and was thus removed.
2295 .Ci a20d405db09b7ccca74d3e8c57550883da49e1ae
2296 .P
2297 In the intended setup, only text content would be displayed.
2298 Non-text content would be converted to text by appropriate
2299 .Pe mhshow-show-*
2300 profile entries before, if possible and wanted.
2301 All output would be displayed in a single pager session.
2302 Other kinds of attachments are ignored.
2303 With
2304 .Pe mhshow-show-*
2305 profile entries for them, they can be displayed serially along
2306 the message.
2307 For parallel display, the attachments need to be stored to disk first.
2308 .P
2309 To display text content in foreign charsets, they need to be converted
2310 to the native charset.
2311 Therefore,
2312 .Pe mhshow-charset-*
2313 profile entries used to be needed.
2314 In mmh, the conversion is done automatically by piping the text through
2315 the
2316 .Pn iconv
2317 command, if necessary.
2318 .Ci 2433122c20baccb10b70b49c04c6b0497b5b3b60
2319 Custom
2320 .Pe mhshow-show-*
2321 rules for textual content might need a
2322 .Cl "iconv -f %c %f |
2323 prefix to have the text converted to the native charset.
2324 .P
2325 Although the conversion of foreign charsets to the native one
2326 has improved, it is not consistent enough.
2327 Further work needs to be done and
2328 the basic concepts in this field need to be re-thought.
2329 Though, the default setup of mmh displays message in foreign charsets
2330 correctly without the need to configure anything.
2333 .ig
2335 .P
2336 mhshow/mhstore: Removed support for retrieving message/external-body parts.
2337 These tools won't download the contents automatically anymore. Instead,
2338 they print the information needed to get the contents. If someone should
2339 really receive one of those rare message/external-body messages, he can
2340 do the job manually. We save nearly a thousand lines of code. That's worth
2341 it!
2342 (The profile entry `nmh-access-ftp' and sbr/ruserpass.c for reading
2343 ~/.netrc are gone now.)
2344 .Ci 55e1d8c654ee0f7c45b9361ce34617983b454c32
2346 ..
2350 .H2 "Signing and Encrypting
2351 .P
2352 Nmh offers no direct support for digital signatures and message encryption.
2353 This functionality needed to be added through third-party software.
2354 In mmh, the functionality should be included because it
2355 is a part of modern email and likely wanted by users of mmh.
2356 A fresh mmh installation should support signing and encrypting
2357 out-of-the-box.
2358 Therefore, Neil Rickert's
2359 .Pn mhsign
2360 and
2361 .Pn mhpgp
2362 scripts
2363 .[
2364 neil rickert mhsign mhpgp
2365 .]
2366 were included into mmh.
2367 The scripts fit well into the mmh, because they are lightweight and
2368 of style similar to the existing tools.
2369 Additionally, no licensing difficulties appeared,
2370 as they are part of the public domain.
2371 .P
2372 The scripts were written for nmh, hence I needed to adjust them according
2373 to the differences of mmh.
2374 For instance, I removed the use of the backup prefix and dropped support
2375 for old PGP features.
2376 .P
2377 .Pn mhsign
2378 handles the signing and encrypting part.
2379 It comprises about 250 lines of shell code and interfaces between
2380 .Pn gnupg
2381 and
2382 the MH system.
2383 It was meant to be invoked at the WhatNow prompt, but in mmh,
2384 .Pn send
2385 does the job automatically.
2386 Special header fields were introduced to request the action.
2387 If a draft contains the
2388 .Hd Sign
2389 header field,
2390 .Pn send
2391 will sign it.
2392 The key to be used is either chosen automatically or specified by the
2393 .Pe Pgpkey
2394 profile entry.
2395 .Pn send
2396 always signes messages using the PGP/MIME standard, \" REF XXX
2397 but by manually invoking
2398 .Pn mhsign ,
2399 old-style non-MIME signatures can be created as well.
2400 To sign an outgoing message, the draft needs to contain a
2401 .Hd Enc
2402 header field.
2403 Public keys of all recipients are taken from the gnupg keyring or
2404 from an overrides files, called
2405 .Fn pgpkeys .
2406 Unless public keys are found for all recipients,
2407 .Pn send
2408 will refuse to encrypt and send it.
2409 Currently, messages with hidden (BCC) recipients can not be encrypted.
2410 This corner-case requires a more complex solution.
2411 Covering it is left to do.
2412 .P
2413 The integrated message signing and encrypting support is one of the
2414 most recent features in mmh.
2415 Feedback from users and the experience I will gather myself
2416 will direct the further development of the facility.
2417 It is worthwhile to consider adding
2418 .Sw -[no]sign
2419 and
2420 .Sw -[no]enc
2421 switches to
2422 .Pn send ,
2423 to override the corresponding header fields.
2424 The profile entry:
2425 .VS
2426 send: -sign
2427 VE
2428 .LP
2429 would then activate signing of all outgoing messages.
2430 With the present approach, the line
2431 .VS
2432 Send:
2433 VE
2434 .LP
2435 needs to be added to all message forms to achieve the same result.
2436 Yet, the integration of
2437 .Pn mhsign
2438 into mmh is too recent to have enough experience to decide this
2439 question now.
2440 .P
2441 .Pn mhpgp
2442 is the contrary part to
2443 .Pn mhsign .
2444 It verifies signatures and decrypts messages.
2445 .P
2446 FIXME: Add it to mmh first, then write about it here.
2447 .P
2448 The integration of
2449 .Pn mhpgp
2450 into
2451 .Pn show ,
2452 to automatically verify signatures and decrypt messages as needed,
2453 is a task left open.
2454 .Pn show 's
2455 current structure does not allow such an integration on basis of
2456 the existing code.
2457 Extensive programming work is required. ... FIXME
2463 .H2 "Draft and Trash Folder
2464 .P
2466 .U3 "Draft Folder
2467 .Id draft-folder
2468 .P
2469 In the beginning, MH had the concept of a draft message.
2470 This is the file
2471 .Fn draft
2472 in the MH directory, which is treated special.
2473 On composing a message, this draft file was used.
2474 When starting to compose another message before the former one was sent,
2475 the user had to decide among:
2476 .BU
2477 Using the old draft to finish and send it before starting with a new one.
2478 .BU
2479 Discarding the old draft and replacing it with a new one.
2480 .BU
2481 Preserving the old draft by refiling it to a folder.
2482 .P
2483 It was only possible to work in alternation on multiple drafts.
2484 Therefore, the current draft needed to be refiled to a folder and
2485 another one re-used for editing.
2486 Working on multiple drafts at the same time was impossible.
2487 The usual approach of switching to a different MH context did not
2488 help anything.
2489 .P
2490 The draft folder facility exists to
2491 allow true parallel editing of drafts, in a straight forward way.
2492 It was introduced by Marshall T. Rose, already in 1984.
2493 Similar to other new features, the draft folder was inactive by default.
2494 Even in nmh, the highly useful draft folder was not available
2495 out-of-the-box.
2496 At least, Richard Coleman added the man page
2497 .Mp mh-draft (5)
2498 to better document the feature.
2499 .P
2500 Not using the draft folder facility has the single advantage of having
2501 the draft file at a static location.
2502 This is simple in simple cases but the concept does not scale for more
2503 complex cases.
2504 The concept of the draft message is too limited for the problem.
2505 Therefore the draft folder was introduced.
2506 It is the more powerful and more natural concept.
2507 The draft folder is a folder like any other folder in MH.
2508 Its messages can be listed like any other messages.
2509 A draft message is no longer a special case.
2510 Tools do not need special switches to work on the draft message.
2511 Hence corner-cases were removed.
2512 .P
2513 The trivial part of the work was activating the draft folder with a
2514 default name.
2515 I chose the name
2516 .Fn +drafts
2517 for obvious reasons.
2518 In consequence, the command line switches
2519 .Sw -draftfolder
2520 and
2521 .Sw -draftmessage
2522 could be removed.
2523 More difficult but also more improving was updating the tools to the
2524 new concept.
2525 For nearly three decades, the tools needed to support two draft handling
2526 approaches.
2527 By fully switching to the draft folder, the tools could be simplified
2528 by dropping the awkward draft message handling code.
2529 .Sw -draft
2530 switches were removed because operating on a draft message is no longer
2531 special.
2532 It became indistinguishable to operating on any other message.
2533 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
2534 .P
2535 There is no more need to query the user for draft handling
2536 .Ci 2d48b455c303a807041c35e4248955f8bec59eeb .
2537 It is always possible to add another new draft.
2538 Refiling drafts is without difference to refiling other messages.
2539 All of these special cases are gone.
2540 Yet, one draft-related switch remained.
2541 .Pn comp
2542 still has
2543 .Sw -[no]use
2544 for switching between two modes:
2545 .BU
2546 .Sw -use
2547 to modify an existing draft.
2548 .BU
2549 .Sw -nouse
2550 to compose a new draft, possibly taking some existing message as template.
2551 .P
2552 In either case, the behavior of
2553 .Pn comp
2554 is deterministic.
2555 .P
2556 .Pn send
2557 now operates on the current message in the draft folder by default.
2558 As message and folder can both be overridden by specifying them on
2559 the command line, it is possible to send any message in the mail storage
2560 by simply specifying its number and folder.
2561 In contrast to the other tools,
2562 .Pn send
2563 takes the draft folder as its default folder.
2564 .P
2565 Dropping the draft message concept in favor for the draft folder concept,
2566 removed special cases with regular cases.
2567 This simplified the source code of the tools, as well as the concepts.
2568 In mmh, draft management does not break with the MH concepts
2569 but applies them.
2570 .Cl "scan +drafts" ,
2571 for instance, is a truly natural request.
2572 Most of the work was already done by Rose in the eighties.
2573 The original improvement of mmh is dropping the old draft message approach
2574 and thus simplifying the tools, the documentation and the system as a whole.
2575 Although my part in the draft handling improvement was small,
2576 it was an important one.
2579 .U3 "Trash Folder
2580 .Id trash-folder
2581 .P
2582 Similar to the situation for drafts is the situation for removed messages.
2583 Historically, a message was ``deleted'' by prepending a specific
2584 \fIbackup prefix\fP, usually the comma character, to the file name.
2585 The specific file would then be ignored by MH because only files with
2586 names consisting of digits only are treated as messages.
2587 Although files remained in the file system,
2588 the messages were no longer visible in MH.
2589 To truly delete them, a maintenance job was needed.
2590 Usually a cron job was installed to delete them after a grace time.
2591 For instance:
2592 .VS
2593 find $HOME/Mail -type f -name ',*' -ctime +7 -delete
2594 VE
2595 In such a setup, the original message could be restored
2596 within the grace time interval by stripping the
2597 backup prefix from the file name.
2598 But the user could not rely on this statement.
2599 If the last message of a folder with six messages (\fL1-6\fP) was removed,
2600 message
2601 .Fn 6 ,
2602 became file
2603 .Fn ,6 .
2604 If then a new message entered the same folder, it would be named with
2605 the number one above the highest existing message number.
2606 In this case the message would be named
2607 .Fn 6
2608 then.
2609 If this new message would be removed as well,
2610 then the backup of the former message is overwritten.
2611 Hence, the ability to restore removed messages did not only depend on
2612 the ``sweeping cron job'' but also on the removing of further messages.
2613 It is undesirable to have such obscure and complex mechanisms.
2614 The user should be given a small set of clear assertions, such as
2615 ``Removed files are restorable within a seven-day grace time.''
2616 With the addition ``... unless a message with the same name in the
2617 same folder is removed before.'' the statement becomes complex.
2618 A user will hardly be able to keep track of any removal to know
2619 if the assertion still holds true for a specific file.
2620 In practice, the real mechanism is unclear to the user.
2621 The consequences of further removals are not obvious.
2622 .P
2623 Further more, the backup files are scattered within the whole mail storage.
2624 This complicates managing them.
2625 It is possible with the help of
2626 .Pn find ,
2627 but everything would be more convenient
2628 if the deleted messages would be collected in one place.
2629 .P
2630 The profile entry
2631 .Pe rmmproc
2632 (previously named
2633 .Pe Delete-Prog )
2634 was introduced very early to improve the situation.
2635 It could be set to any command, which would be executed to remove
2636 the specified messages.
2637 This would override the default action described above.
2638 Refiling the to-be-removed files to a trash folder is the usual example.
2639 Nmh's man page
2640 .Mp rmm (1)
2641 proposes to set the
2642 .Pe rmmproc
2643 to
2644 .Cl "refile +d
2645 to move messages to the trash folder,
2646 .Fn +d ,
2647 instead of renaming them with the backup prefix.
2648 The man page proposes additionally the expunge command
2649 .Cl "rm `mhpath +d all`
2650 to empty the trash folder.
2651 .P
2652 Removing messages in such a way has advantages.
2653 The mail storage is prevented from being cluttered with removed messages
2654 because they are all collected in one place.
2655 Existing and removed messages are thus separated more strictly.
2656 No backup files are silently overwritten.
2657 But most important is the ability to keep removed messages in the MH domain.
2658 Messages in the trash folder can be listed like those in any other folder.
2659 Deleted messages can be displayed like any other messages.
2660 Restoring a deleted messages can be done with
2661 .Pn refile .
2662 All operations on deleted files are still covered by the MH tools.
2663 The trash folder is just like any other folder in the mail storage.
2664 .P
2665 Similar to the draft folder case, I dropped the old backup prefix approach
2666 in favor for replacing it by the better suiting trash folder system.
2667 Hence,
2668 .Pn rmm
2669 calls
2670 .Pn refile
2671 to move the to-be-removed message to the trash folder,
2672 .Fn +trash
2673 by default.
2674 To sweep it clean, the user can use
2675 .Cl "rmm -unlink +trash a" ,
2676 where the
2677 .Sw -unlink
2678 switch causes the files to be unlinked.
2679 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
2680 .Ci ca0b3e830b86700d9e5e31b1784de2bdcaf58fc5
2681 .P
2682 Dropping the legacy approach and converting to the new approach completely
2683 simplified the code base.
2684 The relationship between
2685 .Pn rmm
2686 and
2687 .Pn refile
2688 was inverted.
2689 In mmh,
2690 .Pn rmm
2691 invokes
2692 .Pn refile ,
2693 which used to be the other way round.
2694 Yet, the relationship is simpler now.
2695 Loops, like described in nmh's man page for
2696 .Mp refile (1),
2697 can no longer occur:
2698 .QS
2699 Since
2700 .Pn refile
2701 uses your
2702 .Pe rmmproc
2703 to delete the message, the
2704 .Pe rmmproc
2705 must NOT call
2706 .Pn refile
2707 without specifying
2708 .Sw -normmproc
2709 or you will create an infinite loop.
2710 .QE
2711 .LP
2712 .Pn rmm
2713 either unlinks a message with
2714 .Fu unlink()
2715 or invokes
2716 .Pn refile
2717 to move it to the trash folder.
2718 .Pn refile
2719 does not invoke any tools.
2720 .P
2721 By generalizing the message removal in the way that it became covered
2722 by the MH concepts made the whole system more powerful.
2728 .H2 "Modern Defaults
2729 .P
2730 Nmh has a bunch of convenience-improving features inactive by default,
2731 although one can expect every new user wanting to have them active.
2732 The reason they are inactive by default is the wish to stay compatible
2733 with old versions.
2734 But what is the definition for old versions?
2735 Still, the highly useful draft folder facility has not been activated
2736 by default although it was introduced over twenty-five years ago.
2737 .[
2738 rose romine real work
2739 .]
2740 The community seems not to care.
2741 This is one of several examples that require new users to first build up
2742 a profile before they can access the modern features of nmh.
2743 Without an extensive profile, the setup is hardly usable
2744 for modern emailing.
2745 The point is not the customization of the setup,
2746 but the need to activate generally useful facilities.
2747 .P
2748 Yet, the real problem lies less in enabling the features, as this is
2749 straight forward as soon as one knows what he wants.
2750 The real problem is that new users need deep insight into the project
2751 to find out about inactive features nmh already provides.
2752 To give an example, I needed one year of using nmh
2753 before I became aware of the existence of the attachment system.
2754 One could argue that this fact disqualifies my reading of the
2755 documentation.
2756 If I would have installed nmh from source back then, I could agree.
2757 Yet, I had used a prepackaged version and had expected that it would
2758 just work.
2759 Nevertheless, I had been convinced by the concepts of MH already
2760 and I am a software developer,
2761 still I required a lot of time to discover the cool features.
2762 How can we expect users to be even more advanced than me,
2763 just to allow them use MH in a convenient and modern way?
2764 Unless they are strongly convinced of the concepts, they will fail.
2765 I have seen friends of me giving up disappointed
2766 before they truly used the system,
2767 although they had been motivated in the beginning.
2768 They suffer hard enough to get used to the toolchest approach,
2769 we should spare them further inconveniences.
2770 .P
2771 Maintaining compatibility for its own sake is bad,
2772 because the code base collects more and more compatibility code.
2773 Sticking to the compatiblity code means remaining limited;
2774 whereas adjusting to the changes renders the compatibility unnecessary.
2775 Keeping unused alternatives in the code is a bad choice as they likely
2776 gather bugs, by not being well tested.
2777 Also, the increased code size and the greater number of conditions
2778 increase the maintenance costs.
2779 If any MH implementation would be the back-end of widespread
2780 email clients with large user bases, compatibility would be more
2781 important.
2782 Yet, it appears as if this is not the case.
2783 Hence, compatibility is hardly important for technical reasons.
2784 Its importance originates rather from personal reasons.
2785 Nmh's user base is small and old.
2786 Changing the interfaces would cause inconvenience to long-term users of MH.
2787 It would force them to change their many years old MH configurations.
2788 I do understand this aspect, but by sticking to the old users,
2789 new users are kept away.
2790 Yet, the future lies in new users.
2791 In consequence, mmh invites new users by providing a convenient
2792 and modern setup, readily usable out-of-the-box.
2793 .P
2794 In mmh, all modern features are active by default and many previous
2795 approaches are removed or only accessible in manual ways.
2796 New default features include:
2797 .BU
2798 The attachment system (\c
2799 .Hd Attach ).
2800 .Ci 8ff284ff9167eff8f5349481529332d59ed913b1
2801 .BU
2802 The draft folder facility (\c
2803 .Fn +drafts ).
2804 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
2805 .BU
2806 The unseen sequence (`u')
2807 .Ci c2360569e1d8d3678e294eb7c1354cb8bf7501c1
2808 and the sequence negation prefix (`!').
2809 .Ci db74c2bd004b2dc9bf8086a6d8bf773ac051f3cc
2810 .BU
2811 Quoting the original message in the reply.
2812 .Ci 67411b1f95d6ec987b4c732459e1ba8a8ac192c6
2813 .BU
2814 Forwarding messages using MIME.
2815 .Ci 6e271608b7b9c23771523f88d23a4d3593010cf1
2816 .P
2817 In consequence, a setup with a profile that defines only the path to the
2818 mail storage, is already convenient to use.
2819 Again, Paul Vixie's ``edginess'' call supports the direction I took:
2820 ``the `main branch' should just be modern''.
2821 .[
2822 paul vixie edginess nmh-workers
2823 .]
2829 .\" --------------------------------------------------------------
2830 .H1 "Styling
2831 .P
2832 Kernighan and Pike have emphasized the importance of style in the
2833 preface of their book:
2834 .[ [
2835 kernighan pike practice of programming
2836 .], p. x]
2837 .QS
2838 Chapter 1 discusses programming style.
2839 Good style is so important to good programming that we have chose
2840 to cover it first.
2841 .QE
2842 This section covers changes in mmh that were guided by the desire
2843 to improve on style.
2844 Many of them follow the rules given in the quoted book.
2845 .[
2846 kernighan pike practice of programming
2847 .]
2852 .H2 "Code Style
2853 .Id code-style
2854 .P
2855 .U3 "Indentation Style
2856 .P
2857 Indentation styles are the holy cow of programmers.
2858 Kernighan and Pike
2859 .[ [
2860 kernighan pike practice of programming
2861 .], p. 10]
2862 wrote:
2863 .QS
2864 Programmers have always argued about the layout of programs,
2865 but the specific style is much less important than its consistent
2866 application.
2867 Pick one style, preferably ours, use it consistently, and don't waste
2868 time arguing.
2869 .QE
2870 .P
2871 I agree that the constant application is most important,
2872 but I believe that some styles have advantages over others.
2873 For instance the indentation with tab characters only.
2874 Tab characters directly map to the nesting level \(en
2875 one tab, one level.
2876 Tab characters are flexible because developers can adjust them to
2877 whatever width they like to have.
2878 There is no more need to run
2879 .Pn unexpand
2880 or
2881 .Pn entab
2882 programs to ensure the correct mixture of leading tabs and spaces.
2883 The simple rules are: (1) Leading whitespace must consist of tabs only.
2884 (2) Any other whitespace should consist of spaces.
2885 These two rules ensure the integrity of the visual appearance.
2886 Although reformatting existing code should be avoided, I did it.
2887 I did not waste time arguing; I just reformated the code.
2888 .Ci a485ed478abbd599d8c9aab48934e7a26733ecb1
2890 .U3 "Comments
2891 .P
2892 Section 1.6 of
2893 .[ [
2894 kernighan pike practice of programming
2895 .], p. 23]
2896 demands: ``Don't belabor the obvious.''
2897 Hence, I simply removed all the comments in the following code excerpt:
2898 .VS
2899 context_replace(curfolder, folder); /* update current folder */
2900 seq_setcur(mp, mp->lowsel); /* update current message */
2901 seq_save(mp); /* synchronize message sequences */
2902 folder_free(mp); /* free folder/message structure */
2903 context_save(); /* save the context file */
2905 [...]
2907 int c; /* current character */
2908 char *cp; /* miscellaneous character pointer */
2910 [...]
2912 /* NUL-terminate the field */
2913 *cp = '\0';
2914 VE
2915 .Ci 426543622b377fc5d091455cba685e114b6df674
2916 .P
2917 The program code explains enough itself, already.
2920 .U3 "Names
2921 .P
2922 Kernighan and Pike suggest:
2923 ``Use active names for functions''.
2924 .[ [
2925 kernighan pike practice of programming
2926 .], p. 4]
2927 One application of this rule was the rename of
2928 .Fu check_charset()
2929 to
2930 .Fu is_native_charset() .
2931 .Ci 8d77b48284c58c135a6b2787e721597346ab056d
2932 The same change fixed a violation of ``Be accurate'' as well.
2933 The code did not match the expectation the function suggested,
2934 as it, for whatever reason, only compared the first ten characters
2935 of the charset name.
2936 .P
2937 More important than using active names is using descriptive names.
2938 .VS
2939 m_unknown(in); /* the MAGIC invocation... */
2940 VE
2941 Renaming the obscure
2942 .Fu m_unknown()
2943 function was a delightful event, although it made the code less funny.
2944 .Ci 611d68d19204d7cbf5bd585391249cb5bafca846
2945 .P
2946 Magic numbers are generally considered bad style.
2947 Obviously, Kernighan and Pike agree:
2948 ``Give names to magic numbers''.
2949 .[ [
2950 kernighan pike practice of programming
2951 .], p. 19]
2952 One such change was naming the type of input \(en mbox or mail folder \(en
2953 to be scanned:
2954 .VS
2955 #define SCN_MBOX (-1)
2956 #define SCN_FOLD 0
2957 VE
2958 .Ci 7ffb36d28e517a6f3a10272056fc127592ab1c19
2959 .P
2960 The argument
2961 .Ar outnum
2962 of the function
2963 .Fu scan()
2964 in
2965 .Fn uip/scansbr.c
2966 defines the number of the message to be created.
2967 If no message is to be created, the argument is misused to transport
2968 program logic.
2969 This lead to obscure code.
2970 I improved the clarity of the code by introducing two variables:
2971 .VS
2972 int incing = (outnum > 0);
2973 int ismbox = (outnum != 0);
2974 VE
2975 They cover the magic values and are used for conditions.
2976 The variable
2977 .Ar outnum
2978 is only used when it holds an ordinary message number.
2979 .Ci b8b075c77be7794f3ae9ff0e8cedb12b48fd139f
2980 The clarity improvement of the change showed detours in the program logic
2981 of related code parts.
2982 Having the new variables with descriptive names, a more
2983 straight forward implementation became apparent.
2984 Before the clarification was done,
2985 the possibility to improve had not be seen.
2986 .Ci aa60b0ab5e804f8befa890c0a6df0e3143ce0723
2990 .H2 "Structural Rework
2991 .P
2992 Although the stylistic changes described up to here improve the
2993 readability of the source code, all of them are changes ``in the small''.
2994 Structural changes affect a much larger area.
2995 They are more difficult to do but lead to larger improvements,
2996 especially as they influence the outer shape of the tools as well.
2997 .P
2998 At the end of their chapter on style,
2999 Kernighan and Pike ask: ``But why worry about style?''
3000 Following are two examples of structural rework that show
3001 why style is important in the first place.
3004 .U3 "Rework of \f(CWanno\fP
3005 .P
3006 Until 2002,
3007 .Pn anno
3008 had six functional command line switches,
3009 .Sw -component
3010 and
3011 .Sw -text ,
3012 which have an argument each,
3013 and the two pairs of flags,
3014 .Sw -[no]date
3015 and
3016 .Sw -[no]inplace .
3017 Then Jon Steinhart introduced his attachment system.
3018 In need for more advanced annotation handling, he extended
3019 .Pn anno .
3020 He added five more switches:
3021 .Sw -draft ,
3022 .Sw -list ,
3023 .Sw -delete ,
3024 .Sw -append ,
3025 and
3026 .Sw -number ,
3027 the last one taking an argument.
3028 .Ci 7480dbc14bc90f2d872d434205c0784704213252
3029 Later,
3030 .Sw -[no]preserve
3031 was added.
3032 .Ci d9b1d57351d104d7ec1a5621f090657dcce8cb7f
3033 Then, the Synopsis section of the man page
3034 .Mp anno (1)
3035 read:
3036 .VS
3037 anno [+folder] [msgs] [-component field] [-inplace | -noinplace]
3038 [-date | -nodate] [-draft] [-append] [-list] [-delete]
3039 [-number [num|all]] [-preserve | -nopreserve] [-version]
3040 [-help] [-text body]
3041 VE
3042 .LP
3043 The implementation followed the same structure.
3044 Problems became visible when
3045 .Cl "anno -list -number 42
3046 worked on the current message instead on message number 42,
3047 and
3048 .Cl "anno -list -number l:5
3049 did not work on the last five messages but failed with the mysterious
3050 error message: ``anno: missing argument to -list''.
3051 Yet, the invocation matched the specification in the man page.
3052 There, the correct use of
3053 .Sw -number
3054 was defined as being
3055 .Cl "[-number [num|all]]
3056 and the textual description for the combination with
3057 .Sw -list
3058 read:
3059 .QS
3060 The
3061 .Sw -list
3062 option produces a listing of the field bodies for
3063 header fields with names matching the specified component,
3064 one per line. The listing is numbered, starting at 1, if the
3065 .Sw -number
3066 option is also used.
3067 .QE
3068 .LP
3069 The problem was manifold.
3070 The code required a numeric argument to the
3071 .Sw -number
3072 switch.
3073 If it was missing or non-numeric,
3074 .Pn anno
3075 aborted with an error message that had an off-by-one error,
3076 printing the switch one before the failing one.
3077 Semantically, the argument to the
3078 .Sw -number
3079 switch is only necessary in combination with
3080 .Sw -delete ,
3081 but not with
3082 .Sw -list .
3083 In the former case it is even necessary.
3084 .P
3085 Trying to fix these problems on the surface would not have solved it truly.
3086 The problems discovered originate from a discrepance between the semantic
3087 structure of the problem and the structure implemented in the program.
3088 Such structural differences can not be cured on the surface.
3089 They need to be solved by adjusting the structure of the implementation
3090 to the structure of the problem.
3091 .P
3092 In 2002, the new switches
3093 .Sw -list
3094 and
3095 .Sw -delete
3096 were added in the same way, the
3097 .Sw -number
3098 switch for instance had been added.
3099 Yet, they are of structural different type.
3100 Semantically,
3101 .Sw -list
3102 and
3103 .Sw -delete
3104 introduce modes of operation.
3105 Historically,
3106 .Pn anno
3107 had only one operation mode: adding header fields.
3108 With the extension, it got two moder modes:
3109 listing and deleting header fields.
3110 The structure of the code changes did not pay respect to this
3111 fundamental change to
3112 .Pn anno 's
3113 behavior.
3114 Neither the implementation nor the documentation did clearly
3115 define them as being exclusive modes of operation.
3116 Having identified the problem, I solved it by putting structure into
3117 .Pn anno
3118 and its documentation.
3119 .Ci d54c8db8bdf01e8381890f7729bc0ef4a055ea11
3120 .P
3121 The difference is visible in both, the code and the documentation.
3122 The following code excerpt:
3123 .VS
3124 int delete = -2; /* delete header element if set */
3125 int list = 0; /* list header elements if set */
3126 [...]
3127 case DELETESW: /* delete annotations */
3128 delete = 0;
3129 continue;
3130 case LISTSW: /* produce a listing */
3131 list = 1;
3132 continue;
3133 VE
3134 .LP
3135 was replaced by:
3136 .VS
3137 static enum { MODE_ADD, MODE_DEL, MODE_LIST } mode = MODE_ADD;
3138 [...]
3139 case DELETESW: /* delete annotations */
3140 mode = MODE_DEL;
3141 continue;
3142 case LISTSW: /* produce a listing */
3143 mode = MODE_LIST;
3144 continue;
3145 VE
3146 .LP
3147 The replacement code does not only reflect the problem's structure better,
3148 it is easier to understand as well.
3149 The same applies to the documentation.
3150 The man page was completely reorganized to propagate the same structure.
3151 This is visible in the Synopsis section:
3152 .VS
3153 anno [+folder] [msgs] [-component field] [-text body]
3154 [-append] [-date | -nodate] [-preserve | -nopreserve]
3155 [-Version] [-help]
3157 anno -delete [+folder] [msgs] [-component field] [-text
3158 body] [-number num | all ] [-preserve | -nopreserve]
3159 [-Version] [-help]
3161 anno -list [+folder] [msgs] [-component field] [-number]
3162 [-Version] [-help]
3163 VE
3164 .\" XXX think about explaining the -preserve rework?
3168 .U3 "Path Conversion
3169 .P
3170 Four kinds of path names can appear in MH:
3171 .IP (1)
3172 Absolute Unix directory paths, like
3173 .Fn /etc/passwd .
3174 .IP (2)
3175 Relative Unix directory paths, like
3176 .Fn ./foo/bar .
3177 .IP (3)
3178 Absolute MH folder paths, like
3179 .Fn +friends/phil .
3180 .IP (4)
3181 Relative MH folder paths, like
3182 .Fn @subfolder .
3183 .P
3184 The last type, relative MH folder paths, are hardly documented.
3185 Nonetheless, they are useful for large mail storages.
3186 The current mail folder is specified as `\c
3187 .Fn @ ',
3188 just like the current directory is specified as `\c
3189 .Fn . '.
3190 .P
3191 To allow MH tools to understand all four notations,
3192 they need to convert between them.
3193 In nmh, these path name conversion functions were located in the files
3194 .Fn sbr/path.c
3195 (``return a pathname'') and
3196 .Fn sbr/m_maildir.c
3197 (``get the path for the mail directory'').
3198 The seven functions in the two files were documented with no more
3199 than two comments, which described obvious information.
3200 The function signatures were neither explaining:
3201 .VS
3202 char *path(char *, int);
3203 char *pluspath(char *);
3204 char *m_mailpath(char *);
3205 char *m_maildir(char *);
3206 VE
3207 .P
3208 My investigation provides the following description:
3209 .BU
3210 The second parameter of
3211 .Fu path()
3212 defines the type of path given as first parameter.
3213 Directory paths are converted to absolute directory paths.
3214 Folder paths are converted to absolute folder paths.
3215 Folder paths must not include a leading `@' character.
3216 Leading plus characters are preserved.
3217 The result is a pointer to newly allocated memory.
3218 .BU
3219 .Fu pluspath()
3220 is a convenience-wrapper to
3221 .Fu path() ,
3222 to convert folder paths only.
3223 This function can not be used for directory paths.
3224 An empty string parameter causes a buffer overflow.
3225 .BU
3226 .Fu m_mailpath()
3227 converts directory paths to absolute directory paths.
3228 The characters `+' or `@' at the beginning of the path name are
3229 treated literal, i.e. as the first character of a relative directory path.
3230 Hence, this function can not be used for folder paths.
3231 In any case, the result is an absolute directory path.
3232 The result is a pointer to newly allocated memory.
3233 .BU
3234 .Fu m_maildir()
3235 returns the parameter unchanged if it is an absolute directory path
3236 or begins with the entry `.' or `..'.
3237 All other strings are prepended with the current working directory.
3238 Hence, this functions can not be used for folder paths.
3239 The result is either an absolute directory path or a relative
3240 directory path, starting with a dot.
3241 In contrast to the other functions, the result is a pointer to
3242 static memory.
3243 .P
3244 The situation was obscure, irritating, error-prone, and non-orthogonal.
3245 No clear terminology was used to name the different kinds of path names.
3246 The first argument of
3247 .Fu m_mailpath() ,
3248 for instance, was named
3249 .Ar folder ,
3250 though
3251 .Fu m_mailpath()
3252 can not be used for MH folders.
3253 .P
3254 I reworked the path name conversion completely, introducing clarity.
3255 First of all, the terminology needed to be defined.
3256 A path name is either in the Unix domain, then it is called
3257 \fIdirectory path\fP, `dirpath' for short, or it is in the MH domain,
3258 then it is called \fIfolder path\fP, `folpath' for short.
3259 The two terms need to be used with strict distinction.
3260 Having a clear terminology is often an indicator of having understood
3261 the problem itself.
3262 Second, I exploited the concept of path type indicators.
3263 By requesting every path name to start with a clear type identifier,
3264 conversion between the types can be fully automated.
3265 Thus the tools can accept paths of any type from the user.
3266 Therefore, it was necessary to require relative directory paths to be
3267 prefixed with a dot character.
3268 In consequence, the dot character could no longer be an alias for the
3269 current message.
3270 .Ci cff0e16925e7edbd25b8b9d6d4fbdf03e0e60c01
3271 Third, I created three new functions to replace the previous mess:
3272 .BU
3273 .Fu expandfol()
3274 converts folder paths to absolute folder paths,
3275 without the leading plus character.
3276 Directory paths are simply passed through.
3277 This function is to be used for folder paths only, thus the name.
3278 The result is a pointer to static memory.
3279 .BU
3280 .Fu expanddir()
3281 converts directory paths to absolute directory paths.
3282 Folder paths are treated as relative directory paths.
3283 This function is to be used for directory paths only, thus the name.
3284 The result is a pointer to static memory.
3285 .BU
3286 .Fu toabsdir()
3287 converts any type of path to an absolute directory path.
3288 This is the function of choice for path conversion.
3289 Absolute directory paths are the most general representation of a
3290 path name.
3291 The result is a pointer to static memory.
3292 .P
3293 The new functions have names that indicate their use.
3294 Two of the functions convert relative to absolute path names of the
3295 same type.
3296 The third function converts any path name type to the most general one,
3297 the absolute directory path.
3298 All of the functions return pointers to static memory.
3299 All three functions are implemented in
3300 .Fn sbr/path.c .
3301 .Fn sbr/m_maildir.c
3302 is removed.
3303 .Ci d39e2c447b0d163a5a63f480b23d06edb7a73aa0
3304 .P
3305 Along with the path conversion rework, I also replaced
3306 .Fu getfolder(FDEF)
3307 with
3308 .Fu getdeffol()
3309 and
3310 .Fu getfolder(FCUR)
3311 with
3312 .Fu getcurfol() ,
3313 which is only a convenience wrapper for
3314 .Fu expandfol("@") .
3315 This code was moved from
3316 .Fn sbr/getfolder.c
3317 to
3318 .Fn sbr/path.c .
3319 .Ci d39e2c447b0d163a5a63f480b23d06edb7a73aa0
3320 .P
3321 The related function
3322 .Fu etcpath()
3323 was moved to
3324 .Fn sbr/path.c ,
3325 too
3326 .Ci b4c29794c12099556151d93a860ee51badae2e35 .
3327 Previously, it had been located in
3328 .Fn config/config.c ,
3329 for whatever reasons.
3330 .P
3331 .Fn sbr/path.c
3332 now contains all path handling code.
3333 Only 173 lines of code were needed to replace the previous 252 lines.
3334 The readability of the code is highly improved.
3335 Additionally, each of the six exported and one static functions
3336 is introduced by an explaining comment.
3341 .H2 "Profile Reading
3342 .P
3343 The MH profile contains the configuration for the user-specific MH setup.
3344 MH tools read the profile right after starting up,
3345 as it contains the location of the user's mail storage
3346 and similar settings that influence the whole setup.
3347 Further more, the profile contains the default switches for the tools,
3348 hence, it must be read before the command line switches are processed.
3349 .P
3350 For historic reasons, some MH tools did not read the profile and context.
3351 Among them were
3352 .Pn post /\c
3353 .Pn spost ,
3354 .Pn mhmail ,
3355 and
3356 .Pn slocal .
3357 The reason why these tools ignored the profile were not clearly stated.
3358 During the discussion on the nmh-workers mailing list,
3359 .[
3360 nmh-workers levine post profile
3361 .]
3362 David Levine posted an explanation, quoting John Romine:
3363 .QS
3364 I asked John Romine and here's what he had to say, which
3365 agrees and provides an example that convinces me:
3366 .QS
3367 My take on this is that
3368 .Pn post
3369 should not be called by users directly, and it doesn't read the
3370 .Fn .mh_profile
3371 (only front-end UI programs read the profile).
3372 .QP
3373 For example, there can be contexts where
3374 .Pn post
3375 is called by a helper program (like `\c
3376 .Pn mhmail ')
3377 which may be run by a non-MH user.
3378 We don't want this to prompt the user to create an MH profile, etc.
3379 .QP
3380 My suggestion would be to have
3381 .Pn send
3382 pass a (hidden) `\c
3383 .Sw -fileproc
3384 .Ar proc '
3385 option to
3386 .Pn post
3387 if needed.
3388 You could also
3389 use an environment variable (I think
3390 .Pn send /\c
3391 .Pn whatnow
3392 do this).
3393 .QE
3394 I think that's the way to go.
3395 My personal preference is to use a command line option,
3396 not an environment variable.
3397 .QE
3398 .P
3399 To solve the problem of
3400 .Pn post
3401 not honoring the
3402 .Pe fileproc
3403 profile entry,
3404 the community roughly agreed that a switch
3405 .Sw -fileproc
3406 should be added to
3407 .Pn post
3408 to be able to pass a different fileproc.
3409 I strongly disagree with this approach because it does not solve
3410 the problem; it only removes a single symptom.
3411 The problem is that
3412 .Pn post
3413 does not behave as expected.
3414 But all programs should behave as expected.
3415 Clear and simple concepts are a precondition for this.
3416 Hence, the real solution is having all MH tools read the profile.
3417 .P
3418 Yet, the problem has a further aspect.
3419 It mainly originates in
3420 .Pn mhmail .
3421 .Pn mhmail
3422 was intended to be a replacement for
3423 .Pn mailx
3424 on systems with MH installations.
3425 .Pn mhmail
3426 should have been able to use just like
3427 .Pn mailx ,
3428 but sending the message via MH's
3429 .Pn post
3430 instead of
3431 .Pn sendmail .
3432 Using
3433 .Pn mhmail
3434 should not be influenced by the question whether the user had
3435 MH set up for himself or not.
3436 .Pn mhmail
3437 did not read the profile as this requests the user to set up MH
3438 if not done yet.
3439 As
3440 .Pn mhmail
3441 used
3442 .Pn post ,
3443 .Pn post
3444 could not read the profile neither.
3445 This is the reason why
3446 .Pn post
3447 does not read the profile.
3448 This is the reason for the actual problem.
3449 It was not much of a problem because
3450 .Pn post
3451 was not intended to be used by users directly.
3452 .Pn send
3453 is the interactive front-end to
3454 .Pn post .
3455 .Pn send
3456 read the profile and passed all relevant values on the command line to
3457 .Pn post
3458 \(en an awkward solution.
3459 .P
3460 The important insight is that
3461 .Pn mhmail
3462 is no true MH tool.
3463 The concepts broke because this outlandish tool was treated as any other
3464 MH tool.
3465 Instead it should have been treated accordingly to its foreign style.
3466 The solution is not to prevent the tools reading the profile but
3467 to instruct them reading a different profile.
3468 .Pn mhmail
3469 could have set up a well-defined profile and caused all MH tools
3470 in the session use it by exporting an environment variable.
3471 With this approach, no special cases would have been introduced,
3472 no surprises would have been caused.
3473 By writing a clean-profile-wrapper, the concept could have been
3474 generalized orthogonally to the whole MH toolchest.
3475 Then Rose's motivation behind the decision that
3476 .Pn post
3477 ignores the profile, as quoted by Jeffrey Honig,
3478 .[
3479 nmh-workers post profile
3480 .]
3481 would have become possible:
3482 .QS
3483 when you run mh commands in a script, you want all the defaults to be
3484 what the man page says.
3485 when you run a command by hand, then you want your own defaults...
3486 .QE
3487 .LP
3488 Yet, I consider this explanation short-sighted.
3489 We should rather regard theses two cases as just two different MH setups,
3490 based on two different profiles.
3491 Mapping such problems on the concepts of switching between different
3492 profiles, solves them once for all.
3493 .P
3494 In mmh, the wish to have
3495 .Pn mhmail
3496 as as replacement for
3497 .Pn mailx
3498 is considered obsolete.
3499 Mmh's
3500 .Pn mhmail
3501 does no longer cover this use-case.
3502 Currently,
3503 .Pn mhmail
3504 is in a transition state.
3505 .Ci 32d4f9daaa70519be3072479232ff7be0500d009
3506 It may become a front-end to
3507 .Pn comp ,
3508 which provides an interface more convenient in some cases.
3509 In this case,
3510 .Pn mhmail
3511 will become an ordinary MH tool, reading the profile.
3512 If, however, this idea will not convince, then
3513 .Pn mhmail
3514 will be removed.
3515 .P
3516 Every program in the mmh toolchest reads the profile.
3517 The only exception is
3518 .Pn slocal ,
3519 which is not considered part of the mmh toolchest.
3520 This MDA is only distributed with mmh, currently.
3521 Mmh has no
3522 .Pn post
3523 program, but
3524 .Pn spost ,
3525 which now reads the profile.
3526 .Ci 3e017a7abbdf69bf0dff7a4073275961eda1ded8
3527 With this change,
3528 .Pn send
3529 and
3530 .Pn spost
3531 can be considered to be merged.
3532 Direct invocations of
3533 .Pn spost
3534 are only done by the to-be-changed
3535 .Pn mhmail
3536 implementation and by
3537 .Pn rcvdist ,
3538 which will require rework.
3539 .P
3540 The
3541 .Fu context_foil()
3542 function to pretend to have read an empty profile was removed.
3543 .Ci 68af8da96bea87a5541988870130b6209ce396f6
3544 All mmh tools read the profile.
3548 .H2 "Standard Libraries
3549 .P
3550 MH is one decade older than the POSIX and ANSI C standards.
3551 Hence, MH included own implementations of functions
3552 that are standardized and thus widely available today,
3553 but were not back then.
3554 Today, twenty years after the POSIX and ANSI C were published,
3555 developers can expect system to comply with these standards.
3556 In consequence, MH-specific replacements for standard functions
3557 can and should be dropped.
3558 Kernighan and Pike advise: ``Use standard libraries.''
3559 .[ [
3560 kernighan pike practice of programming
3561 .], p. 196]
3562 Actually, MH had followed this advice in history,
3563 but it had not adjusted to the changes in this field.
3564 The
3565 .Fu snprintf()
3566 function, for instance, was standardized with C99 and is available
3567 almost everywhere because of its high usefulness.
3568 In project's own implementation of
3569 .Fu snprintf()
3570 was dropped in March 2012 in favor for using the one of the
3571 standard library.
3572 .Ci 0052f1024deb0a0a2fc2e5bacf93d45a5a9c9b32
3573 Such decisions limit the portability of mmh
3574 if systems don't support these standardized and widespread functions.
3575 This compromise is made because mmh focuses on the future.
3576 .P
3577 I am not yet thirty years old and my C and Unix experience comprises
3578 only half a dozen years.
3579 Hence, I need to learn about the history in retrospective.
3580 I have not used those ancient constructs myself.
3581 I have not suffered from their incompatibilities.
3582 I have not longed for standardization.
3583 All my programming experience is from a time when ANSI C and POSIX
3584 were well established already.
3585 I have only read a lot of books about the (good) old times.
3586 This puts me in a difficult positions when working with old code.
3587 I need to freshly acquire knowledge about old code constructs and ancient
3588 programming styles, whereas older programmers know these things by
3589 heart from their own experience.
3590 .P
3591 Being aware of the situation, I rather let people with more historic
3592 experience replace ancient code constructs with standardized ones.
3593 Lyndon Nerenberg covered large parts of this task for the nmh project.
3594 He converted project-specific functions to POSIX replacements,
3595 also removing the conditionals compilation of now standardized features.
3596 Ken Hornstein and David Levine had their part in the work, too.
3597 Often, I only needed to pull over changes from nmh into mmh.
3598 These changes include many commits; these are among them:
3599 .Ci 768b5edd9623b7238e12ec8dfc409b82a1ed9e2d
3600 .Ci 0052f1024deb0a0a2fc2e5bacf93d45a5a9c9b32 .
3601 .P
3602 During my own work, I tidied up the \fIMH standard library\fP,
3603 .Fn libmh.a ,
3604 which is located in the
3605 .Fn sbr
3606 (``subroutines'') directory in the source tree.
3607 The MH library includes functions that mmh tools usually need.
3608 Among them are MH-specific functions for profile, context, sequence,
3609 and folder handling, but as well
3610 MH-independent functions, such as auxiliary string functions,
3611 portability interfaces and error-checking wrappers for critical
3612 functions of the standard library.
3613 .P
3614 I have replaced the
3615 .Fu atooi()
3616 function with calls to
3617 .Fu strtoul()
3618 with the third parameter, the base, set to eight.
3619 .Fu strtoul()
3620 is part of C89 and thus considered safe to use.
3621 .Ci c490c51b3c0f8871b6953bd0c74551404f840a74
3622 .P
3623 I did remove project-included fallback implementations of
3624 .Fu memmove()
3625 and
3626 .Fu strerror() ,
3627 although Peter Maydell had re-included them into nmh in 2008
3628 to support SunOS 4.
3629 Nevertheless, these functions are part of ANSI C.
3630 Systems that do not even provide full ANSI C support should not
3631 put a load on mmh.
3632 .Ci b067ff5c465a5d243ce5a19e562085a9a1a97215
3633 .P
3634 The
3635 .Fu copy()
3636 function copies the string in argument one to the location in two.
3637 In contrast to
3638 .Fu strcpy() ,
3639 it returns a pointer to the terminating null-byte in the destination area.
3640 The code was adjusted to replace
3641 .Fu copy()
3642 with
3643 .Fu strcpy() ,
3644 except within
3645 .Fu concat() ,
3646 where
3647 .Fu copy()
3648 was more convenient.
3649 Therefore, the definition of
3650 .Fu copy()
3651 was moved into the source file of
3652 .Fu concat()
3653 and its visibility is now limited to it.
3654 .Ci 552fd7253e5ee9e554c5c7a8248a6322aa4363bb
3655 .P
3656 The function
3657 .Fu r1bindex()
3658 had been a generalized version of
3659 .Fu basename()
3660 with minor differences.
3661 As all calls to
3662 .Fu r1bindex()
3663 had the slash (`/') as delimiter anyway,
3664 replacing
3665 .Fu r1bindex()
3666 with the more specific and better-named function
3667 .Fu basename()
3668 became desirable.
3669 Unfortunately, many of the 54 calls to
3670 .Fu r1bindex()
3671 depended on a special behavior,
3672 which differed from the POSIX specification for
3673 .Fu basename() .
3674 Hence,
3675 .Fu r1bindex()
3676 was kept but renamed to
3677 .Fu mhbasename() ,
3678 fixing the delimiter to the slash.
3679 .Ci 240013872c392fe644bd4f79382d9f5314b4ea60
3680 For possible uses of
3681 .Fu r1bindex()
3682 with a different delimiter,
3683 the ANSI C function
3684 .Fu strrchr()
3685 provides the core functionality.
3686 .P
3687 The
3688 .Fu ssequal()
3689 function \(en apparently for ``substring equal'' \(en
3690 was renamed to
3691 .Fu isprefix() ,
3692 because this is what it actually checks.
3693 .Ci c20b4fa14515c7ab388ce35411d89a7a92300711
3694 Its source file had included the following comments, no joke.
3695 .VS
3696 /*
3697 * THIS CODE DOES NOT WORK AS ADVERTISED.
3698 * It is actually checking if s1 is a PREFIX of s2.
3699 * All calls to this function need to be checked to see
3700 * if that needs to be changed. Prefix checking is cheaper, so
3701 * should be kept if it's sufficient.
3702 */
3704 /*
3705 * Check if s1 is a substring of s2.
3706 * If yes, then return 1, else return 0.
3707 */
3708 VE
3709 Two months later, it was completely removed by replacing it with
3710 .Fu strncmp() .
3711 .Ci b0b1dd37ff515578cf7cba51625189eb34a196cb
3717 .H2 "User Data Locations
3718 .P
3719 In nmh, a personal setup consists of the MH profile and the MH directory.
3720 The profile is a file named
3721 .Fn \&.mh_profile
3722 in the user's home directory.
3723 It contains the static configuration.
3724 It also contains the location of the MH directory in the profile entry
3725 .Pe Path .
3726 The MH directory contains the mail storage and is the first
3727 place to search for personal forms, scan formats, and similar
3728 configuration files.
3729 The location of the MH directory can be chosen freely by the user.
3730 The default and usual name is a directory named
3731 .Fn Mail
3732 in the home directory.
3733 .P
3734 The way MH data is splitted between profile and MH directory is a legacy.
3735 It is only sensible in a situation where the profile is the only
3736 configuration file.
3737 Why else should the mail storage and the configuration files be intermixed?
3738 They are different kinds of data:
3739 The data to be operated on and the configuration to change how
3740 tools operate.
3741 Splitting the configuration between the profile and the MH directory
3742 is bad.
3743 Merging the mail storage and the configuration in one directory is bad
3744 as well.
3745 As the mail storage and the configuration were not separated sensibly
3746 in the first place, I did it now.
3747 .P
3748 Personal mmh data is grouped by type, resulting in two distinct parts:
3749 The mail storage and the configuration.
3750 In mmh, the mail storage directory still contains all the messages,
3751 but, in exception of public sequences files, nothing else.
3752 In difference to nmh, the auxiliary configuration files are no longer
3753 located there.
3754 Therefore, the directory is no longer called the user's \fIMH directory\fP
3755 but his \fImail storage\fP.
3756 Its location is still user-chosen, with the default name
3757 .Fn Mail ,
3758 in the user's home directory.
3759 In mmh, the configuration is grouped together in
3760 the hidden directory
3761 .Fn \&.mmh
3762 in the user's home directory.
3763 This \fImmh directory\fP contains the context file, personal forms,
3764 scan formats, and the like, but also the user's profile, now named
3765 .Fn profile .
3766 The location of the profile is no longer fixed to
3767 .Fn $HOME/.mh_profile
3768 but to
3769 .Fn $HOME/.mmh/profile .
3770 Having both, the file
3771 .Fn $HOME/.mh_profile
3772 and the configuration directory
3773 .Fn $HOME/.mmh
3774 appeared to be inconsistent.
3775 The approach chosen for mmh is consistent, simple, and familiar to
3776 Unix users.
3777 .Ci 7030d7edb099bff36ded7548bb5380f7acab4f9b
3778 .P
3779 MH allows users to have multiple MH setups.
3780 Therefore, it is necessary to select a different profile.
3781 The profile is the single entry point to access the rest of a
3782 personal MH setup.
3783 In nmh, the environment variable
3784 .Ev MH
3785 could be used to specifiy a different profile.
3786 To operate in the same MH setup with a separate context,
3787 the
3788 .Ev MHCONTEXT
3789 environment variable could be used.
3790 This allows having own current folders and current messages in
3791 each terminal, for instance.
3792 In mmh, three environment variables are used.
3793 .Ev MMH
3794 overrides the default location of the mmh directory (\c
3795 .Fn .mmh ).
3796 .Ev MMHP
3797 and
3798 .Ev MMHC
3799 override the paths to the profile and context files, respectively.
3800 This approach allows the set of personal configuration files to be chosen
3801 independently from the profile, context, and mail storage.
3802 .Ci 7030d7edb099bff36ded7548bb5380f7acab4f9b
3803 .P
3804 The separation of the files by type is sensible and convenient.
3805 The new approach has no functional disadvantages,
3806 as every setup I can imagine can be implemented with both approaches,
3807 possibly even easier with the new approach.
3808 The main achievement of the change is the clear and sensible split
3809 between mail storage and configuration.
3815 .H2 "Modularization
3816 .P
3817 The source code of the mmh tools is located in the
3818 .Fn uip
3819 (``user interface programs'') directory.
3820 Each tools has a source file with the same name.
3821 For example,
3822 .Pn rmm
3823 is built from
3824 .Fn uip/rmm.c .
3825 Some source files are used for multiple programs.
3826 For example
3827 .Fn uip/scansbr.c
3828 is used for both,
3829 .Pn scan
3830 and
3831 .Pn inc .
3832 In nmh, 49 tools were built from 76 source files.
3833 This is a ratio of 1.6 source files per program.
3834 32 programs depended on multiple source files;
3835 17 programs depended on one source file only.
3836 In mmh, 39 tools are built from 51 source files.
3837 This is a ratio of 1.3 source files per program.
3838 18 programs depend on multiple source files;
3839 21 programs depend on one source file only.
3840 (These numbers and the ones in the following text ignore the MH library
3841 as well as shell scripts and multiple names for the same program.)
3842 .P
3843 Splitting the source code of a large program into multiple files can
3844 increase the readability of its source code.
3845 Most of the mmh tools, however, are simple and straight-forward programs.
3846 With the exception of the MIME handling tools,
3847 .Pn pick
3848 is the largest tools.
3849 It contains 1\|037 lines of source code (measured with
3850 .Pn sloccount ), excluding the MH library.
3851 Only the MIME handling tools (\c
3852 .Pn mhbuild ,
3853 .Pn mhstore ,
3854 .Pn show ,
3855 etc.)
3856 are larger.
3857 Splitting programs with less than 1\|000 lines of code into multiple
3858 source files seldom leads to better readability.
3859 For such tools, splitting makes sense
3860 when parts of the code are reused in other programs,
3861 and the reused code fragment is not general enough
3862 for including it in the MH library,
3863 or, if the code has dependencies on a library that only few programs need.
3864 .Fn uip/packsbr.c ,
3865 for instance, provides the core program logic for the
3866 .Pn packf
3867 and
3868 .Pn rcvpack
3869 programs.
3870 .Fn uip/packf.c
3871 and
3872 .Fn uip/rcvpack.c
3873 mainly wrap the core function appropriately.
3874 No other tools use the folder packing functions.
3875 As another example,
3876 .Fn uip/termsbr.c
3877 provides termcap support, which requires linking with a termcap or
3878 curses library.
3879 Including
3880 .Fn uip/termsbr.c
3881 into the MH library would require every program to be linked with
3882 termcap or curses, although only few of the programs require it.
3883 .P
3884 The task of MIME handling is complex enough that splitting its code
3885 into multiple source files improves the readability.
3886 The program
3887 .Pn mhstore ,
3888 for instance, is compiled out of seven source files with 2\|500
3889 lines of code in summary.
3890 The main code file
3891 .Fn uip/mhstore.c
3892 consists of 800 lines; the other 1\|700 lines of code are reused in
3893 other MIME handling tools.
3894 It seems to be worthwhile to bundle the generic MIME handling code into
3895 a MH-MIME library, as a companion to the MH standard library.
3896 This is left open for the future.
3897 .P
3898 The work already done focussed on the non-MIME tools.
3899 The amount of code compiled into each program was reduced.
3900 This eases the understanding of the code base.
3901 In nmh,
3902 .Pn comp
3903 was built from six source files:
3904 .Fn comp.c ,
3905 .Fn whatnowproc.c ,
3906 .Fn whatnowsbr.c ,
3907 .Fn sendsbr.c ,
3908 .Fn annosbr.c ,
3909 and
3910 .Fn distsbr.c .
3911 In mmh, it builds from only two:
3912 .Fn comp.c
3913 and
3914 .Fn whatnowproc.c .
3915 In nmh's
3916 .Pn comp ,
3917 the core function of
3918 .Pn whatnow ,
3919 .Pn send ,
3920 and
3921 .Pn anno
3922 were compiled into
3923 .Pn comp .
3924 This saved the need to execute these programs with
3925 .Fu fork()
3926 and
3927 .Fu exec() ,
3928 two expensive system calls.
3929 Whereis this approach improved the time performance,
3930 it interweaved the source code.
3931 Core functionalities were not encapsulated into programs but into
3932 function, which were then wrapped by programs.
3933 For example,
3934 .Fn uip/annosbr.c
3935 included the function
3936 .Fu annotate() .
3937 Each program that wanted to annotate messages, included the source file
3938 .Fn uip/annosbr.c
3939 and called
3940 .Fu annotate() .
3941 Because the function
3942 .Fu annotate()
3943 was used like the tool
3944 .Pn anno ,
3945 it had seven parameters, reflecting the command line switches of the tool.
3946 When another pair of command line switches was added to
3947 .Pn anno ,
3948 a rather ugly hack was implemented to avoid adding another parameter
3949 to the function.
3950 .Ci d9b1d57351d104d7ec1a5621f090657dcce8cb7f
3951 .P
3952 Separation simplifies the understanding of program code
3953 because the area influenced by any particular statement is smaller.
3954 The separating on the program-level is more strict than the separation
3955 on the function level.
3956 In mmh, the relevant code of
3957 .Pn comp
3958 comprises the two files
3959 .Fn uip/comp.c
3960 and
3961 .Fn uip/whatnowproc.c ,
3962 together 210 lines of code.
3963 In nmh,
3964 .Pn comp
3965 comprises six files with 2\|450 lines.
3966 Not all of the code in these six files was actually used by
3967 .Pn comp ,
3968 but the code reader needed to read all of the code first to know which
3969 parts were used.
3970 .P
3971 As I have read a lot in the code base during the last two years,
3972 I learned about the easy and the difficult parts.
3973 Code is easy to understand if:
3974 .BU
3975 The influenced code area is small.
3976 .BU
3977 The boundaries are strictly defined.
3978 .BU
3979 The code is written straight-forward.
3980 .P
3981 .\" XXX move this paragraph somewhere else?
3982 Reading
3983 .Pn rmm 's
3984 source code in
3985 .Fn uip/rmm.c
3986 is my recommendation for a beginner's entry point into the code base of nmh.
3987 The reasons are that the task of
3988 .Pn rmm
3989 is straight forward and it consists of one small source code file only,
3990 yet its source includes code constructs typical for MH tools.
3991 With the introduction of the trash folder in mmh,
3992 .Pn rmm
3993 became a bit more complex, because it invokes
3994 .Pn refile .
3995 Still, it is a good example for a simple tool with clear sources.
3996 .P
3997 Understanding
3998 .Pn comp
3999 requires to read 210 lines of code in mmh, but ten times as much in nmh.
4000 Due to the aforementioned hack in
4001 .Pn anno
4002 to save the additional parameter, information passed through the program's
4003 source base in obscure ways.
4004 Thus, understanding
4005 .Pn comp ,
4006 required understanding the inner workings of
4007 .Fn uip/annosbr.c
4008 first.
4009 To be sure to fully understand a program, its whole source code needs
4010 to be examined.
4011 Not doing so is a leap of faith, assuming that the developers
4012 have avoided obscure programming techniques.
4013 By separating the tools on the program-level, the boundaries are
4014 clearly visible and technically enforced.
4015 The interfaces are calls to
4016 .Fu exec()
4017 rather than arbitrary function calls.
4018 .P
4019 But the real problem is another:
4020 Nmh violates the golden ``one tool, one job'' rule of the Unix philosophy.
4021 Understanding
4022 .Pn comp
4023 requires understanding
4024 .Fn uip/annosbr.c
4025 and
4026 .Fn uip/sendsbr.c
4027 because
4028 .Pn comp
4029 does annotate and send messages.
4030 In nmh, there surely exists the tool
4031 .Pn send ,
4032 which does (almost) only send messages.
4033 But
4034 .Pn comp
4035 and
4036 .Pn repl
4037 and
4038 .Pn forw
4039 and
4040 .Pn dist
4041 and
4042 .Pn whatnow
4043 and
4044 .Pn viamail ,
4045 they all (!) have the same message sending function included, too.
4046 In result,
4047 .Pn comp
4048 sends messages without using
4049 .Pn send .
4050 The situation is the same as if
4051 .Pn grep
4052 would page without
4053 .Pn more
4054 just because both programs are part of the same code base.
4055 .P
4056 The clear separation on the surface \(en the toolchest approach \(en
4057 is violated on the level below.
4058 This violation is for the sake of time performance.
4059 On systems where
4060 .Fu fork()
4061 and
4062 .Fu exec()
4063 are expensive, the quicker response might be noticable.
4064 In the old times, sacrificing readability and conceptional beauty for
4065 speed might even have been a must to prevent MH from being unusably slow.
4066 Whatever the reasons had been, today they are gone.
4067 No longer should we sacrifice readability or conceptional beauty.
4068 No longer should we violate the Unix philosophy's ``one tool, one job''
4069 guideline.
4070 No longer should we keep speed improvements that became unnecessary.
4071 .P
4072 Therefore, mmh's
4073 .Pn comp
4074 does no longer send messages.
4075 In mmh, different jobs are divided among separate programs that
4076 invoke each other as needed.
4077 In consequence,
4078 .Pn comp
4079 invokes
4080 .Pn whatnow
4081 which thereafter invokes
4082 .Pn send .
4083 .Ci 3df5ab3c116e6d4a2fb4bb5cc9dfc5f781825815
4084 .Ci c73c00bfccd22ec77e9593f47462aeca4a8cd9c0
4085 The clear separation on the surface is maintained on the level below.
4086 Human users and the tools use the same interface \(en
4087 annotations, for example, are made by invoking
4088 .Pn anno ,
4089 no matter if requested by programs or by human beings.
4090 .Ci 469a4163c2a1a43731d412eaa5d9cae7d670c48b
4091 .Ci aed384169af5204b8002d06e7a22f89197963d2d
4092 .Ci 3caf9e298a8861729ca8b8a84f57022b6f3ea742
4093 The decrease of tools built from multiple source files and thus
4094 the decrease of
4095 .Fn uip/*sbr.c
4096 files confirm the improvement.
4097 .Ci 9e6d91313f01c96b4058d6bf419a8ca9a207bc33
4098 .ci 81744a46ac9f845d6c2b9908074d269275178d2e
4099 .Ci f0f858069d21111f0dbea510044593f89c9b0829
4100 .Ci 0503a6e9be34f24858b55b555a5c948182b9f24b
4101 .Ci 27826f9353e0f0b04590b7d0f8f83e60462b90f0
4102 .Ci d1da1f94ce62160aebb30df4063ccbc53768656b
4103 .Ci c42222869e318fff5dec395eca3e776db3075455
4104 .P
4105 .\" XXX move this paragraph up somewhere
4106 One disadvantage needs to be taken with this change:
4107 The compiler can no longer check the integrity of the interfaces.
4108 By changing the command line interfaces of tools, it is
4109 the developer's job to adjust the invocations of these tools as well.
4110 As this is a manual task and regression tests, which could detect such
4111 problems, are not available yet, it is prone to errors.
4112 These errors will not be detected at compile time but at run time.
4113 Installing regression tests is a task left to do.
4114 In the best case, a uniform way of invoking tools from other tools
4115 can be developed to allow automated testing at compile time.
4118 .ig
4119 XXX consider writing about mhl vs. mhlproc
4121 sbr/showfile.c
4123 23 /*
4124 24 ** If you have your lproc listed as "mhl",
4125 25 ** then really invoked the mhlproc instead
4126 26 ** (which is usually mhl anyway).
4127 27 */
4129 Sat Nov 24 19:09:14 1984 /mtr (agent: Marshall Rose) <uci@udel-dewey>
4131 sbr/showfile.c: if lproc is "mhl", use mhlproc for consistency
4132 (Actually, user should use "lproc: show", "showproc: mhl".)
4133 ..