docs/master

annotate ch03.roff @ 97:29a7454fcded

Added references to commits.
author markus schnalke <meillo@marmaro.de>
date Sat, 16 Jun 2012 17:28:11 +0200
parents 12348d620245
children d894191d7a33
rev   line source
meillo@58 1 .H0 "Discussion
meillo@0 2 .P
meillo@58 3 This main chapter discusses the practical work done in the mmh project.
meillo@58 4 It is structured along the goals to achieve. The concrete work done
meillo@58 5 is described in the examples of how the general goals were achieved.
meillo@87 6 The discussion compares the current version of mmh with the state of
meillo@87 7 nmh just before the mmh project started, i.e. Fall 2011.
meillo@87 8 Current changes of nmh will be mentioned only as side notes.
meillo@87 9 .\" XXX where do I discuss the parallel development of nmh?
meillo@58 10
meillo@58 11
meillo@58 12
meillo@58 13 .H1 "Stream-lining
meillo@58 14
meillo@0 15 .P
meillo@58 16 MH had been considered an all-in-one system for mail handling.
meillo@58 17 The community around nmh has a similar understanding.
meillo@87 18 In fundamental difference, mmh shall be a MUA only.
meillo@87 19 I believe that the development of all-in-one mail systems is obsolete.
meillo@87 20 Today, email is too complex to be fully covered by single projects.
meillo@87 21 Such a project won't be able to excel in all aspects.
meillo@87 22 Instead, the aspects of email should be covered my multiple projects,
meillo@87 23 which then can be combined to form a complete system.
meillo@87 24 Excellent implementations for the various aspects of email exist already.
meillo@87 25 Just to name three examples: Postfix is a specialized MTA,
meillo@87 26 Procmail is a specialized MDA, and Fetchmail is a specialized MRA.
meillo@89 27 I believe that it is best to use such specialized tools instead of
meillo@87 28 providing the same function again as a side-component in the project.
meillo@58 29 .P
meillo@87 30 Doing something well, requires to focus on a small set of specific aspects.
meillo@87 31 Under the assumption that focused development produces better results
meillo@87 32 in the particular area, specialized projects will likely be superior
meillo@87 33 in their field of focus.
meillo@87 34 Hence, all-in-one mail system projects \(en no matter if monolithic
meillo@87 35 or modular \(en will never be the best choice in any of the fields.
meillo@87 36 Even in providing the best consistent all-in-one system they are likely
meillo@87 37 to be beaten by projects that focus only on integrating existing mail
meillo@89 38 components to a homogeneous system.
meillo@87 39 .P
meillo@87 40 The limiting resource in Free Software community development
meillo@87 41 is usually man power.
meillo@87 42 If the development power is spread over a large development area,
meillo@87 43 it becomes even more difficult to compete with the specialists in the
meillo@87 44 various fields.
meillo@87 45 The concrete situation for MH-based mail systems is even tougher,
meillo@87 46 given the small and aged community, including both developers and users,
meillo@87 47 it has.
meillo@87 48 .P
meillo@87 49 In consequence, I believe that the available development resources
meillo@87 50 should be focused on the point where MH is most unique.
meillo@87 51 This is clearly the user interface \(en the MUA.
meillo@87 52 Peripheral parts should be removed to stream-line mmh for the MUA task.
meillo@60 53
meillo@60 54
meillo@87 55 .H2 "Removal of the Mail Transfer Facilities
meillo@60 56 .P
meillo@60 57 In contrast to nmh, which also provides mail submission and mail retrieval
meillo@87 58 agents, mmh is a MUA only.
meillo@66 59 This general difference in the view on the character of nmh
meillo@76 60 initiated the development of mmh.
meillo@66 61 Removing the mail transfer facilities had been the first work task
meillo@76 62 in the mmh project.
meillo@60 63 .P
meillo@66 64 The MSA is called \fIMessage Transfer Service\fP (MTS) in nmh.
meillo@76 65 The facility established network connections and spoke SMTP to submit
meillo@60 66 messages for relay to the outside world.
meillo@76 67 This part was implemented by the
meillo@60 68 .Pn post
meillo@60 69 command.
meillo@96 70 The changes in email in the last years
meillo@87 71 demanded changes in this part of nmh too.
meillo@89 72 Encryption and authentication for network connections
meillo@87 73 needed to be supported, hence TLS and SASL were introduced into nmh.
meillo@87 74 This added complexity to nmh without improving it in its core functions.
meillo@87 75 Also, keeping up with recent developments in the field of
meillo@87 76 mail transfer requires development power and specialists.
meillo@87 77 In mmh this whole facility was simply cut off.
meillo@76 78 .Ci f6aa95b724fd8c791164abe7ee5468bf5c34f226
meillo@76 79 .Ci fecd5d34f65597a4dfa16aeabea7d74b191532c3
meillo@76 80 .Ci 156d35f6425bea4c1ed3c4c79783dc613379c65b
meillo@87 81 Instead, mmh depends on an external MSA.
meillo@60 82 The only outgoing interface available to mmh is the
meillo@60 83 .Pn sendmail
meillo@87 84 command, which almost any MSA provides.
meillo@87 85 If not, a wrapper program can be written.
meillo@87 86 It must read the message from the standard input, extract the
meillo@87 87 recipient addresses from the message header, and hand the message
meillo@87 88 over to the MSA.
meillo@87 89 For example, a wrapper script for qmail would be:
meillo@87 90 .VS
meillo@87 91 #!/bin/sh
meillo@87 92 # ignore command line arguments
meillo@87 93 exec qmail-inject
meillo@87 94 VE
meillo@87 95 The requirement to parse the recipient addresses out of the message header
meillo@87 96 is likely to be removed in the future.
meillo@87 97 Then mmh would give the recipient addresses as command line arguments.
meillo@87 98 This is clearly the better interface, but mmh does not provide it yet.
meillo@87 99 .\" XXX implement it
meillo@60 100 .P
meillo@60 101 To retrieve mail, the
meillo@60 102 .Pn inc
meillo@76 103 command established network connections
meillo@76 104 and spoke POP3 to retrieve mail from remote servers.
meillo@76 105 As with mail submission, the network connections required encryption and
meillo@87 106 authentication, thus TLS and SASL were added.
meillo@87 107 Support for message retrieval through IMAP will become necessary
meillo@87 108 to be added soon, too, and so on for any changes in mail transfer.
meillo@76 109 Mmh has dropped the support for retrieving mail from remote locations.
meillo@76 110 .Ci ab7b48411962d26439f92f35ed084d3d6275459c
meillo@76 111 Instead, it depends on an external tool to cover this task.
meillo@87 112 In mmh there exist two paths for messages to enter mmh's mail storage:
meillo@87 113 (1) Mail can be incorporate with
meillo@60 114 .Pn inc
meillo@87 115 from the system maildrop, or (2) with
meillo@60 116 .Pn rcvstore
meillo@87 117 by reading them, one at a time, from the standard input.
meillo@60 118 .P
meillo@60 119 With the removal of the MSA and MRA, mmh converted from an all-in-one
meillo@87 120 mail system to being a MUA only.
meillo@87 121 Following the Unix philosophy, it now focuses on one job and
meillo@76 122 tries to do that one well.
meillo@76 123 Not only the programs follow that tenet but also the project itself does so.
meillo@60 124 Now, of course, mmh depends on third-party software.
meillo@87 125 An external MSA is required to transfer mail to the outside world;
meillo@60 126 an external MRA is required to retrieve mail from remote machines.
meillo@60 127 There exist excellent implementations of such software,
meillo@76 128 which do this specific task likely better than the internal
meillo@87 129 versions had done it.
meillo@87 130 Also, the best suiting programs can be freely chosen.
meillo@60 131 .P
meillo@60 132 As it had already been possible to use an external MSA or MRA,
meillo@60 133 why not keep the internal version for convenience?
meillo@76 134 The question whether there is sense in having a fall-back pager in all
meillo@76 135 the command line tools, for the cases when
meillo@60 136 .Pn more
meillo@60 137 or
meillo@60 138 .Pn less
meillo@76 139 aren't available, appears to be ridiculous.
meillo@87 140 Now, an MSA or MRA is more complex than a text pager
meillo@87 141 and not necessarily available but still the concept of orthogonal
meillo@87 142 design holds: ``Write programs that do one thing and do it well.''
meillo@87 143 .[
meillo@87 144 mcilroy unix phil
meillo@87 145 p. 53
meillo@87 146 .]
meillo@87 147 .[
meillo@87 148 mcilroy bstj foreword
meillo@87 149 .]
meillo@87 150 Here, this part of the Unix philosophy was applied not only
meillo@87 151 to the programs but to the project itself.
meillo@87 152 In other words:
meillo@87 153 ``Develop projects that focus on one thing and do it well.''
meillo@87 154 Projects grown complex should be split for the same reasons programs grown
meillo@87 155 complex should be split.
meillo@87 156 If it is conceptionally more elegant to have the MSA and MRA
meillo@87 157 separate projects then they should be separated.
meillo@87 158 This is the case here, in my opinion.
meillo@87 159 The RFCs propose this separation by clearly distinguishing the different
meillo@87 160 mail handling tasks.
meillo@87 161 .[
meillo@87 162 rfc 821
meillo@87 163 .]
meillo@87 164 The small interfaces between the mail agents support the separation.
meillo@76 165 .P
meillo@87 166 In the beginning, email had been small and simple.
meillo@76 167 (\c
meillo@60 168 .Pn /bin/mail
meillo@76 169 had once covered anything there was to email and still had been small
meillo@76 170 and simple.)
meillo@76 171 Then the essential complexity of email increased.
meillo@87 172 (Essential complexity is the complexity defined by the problem itself.\0
meillo@87 173 .[[
meillo@87 174 brooks no silver bullet
meillo@87 175 .]])
meillo@87 176 Email systems reacted to this change: They grew.
meillo@87 177 RFCs started to introduce mail agents and separated the various tasks
meillo@87 178 because the existing tasks became more extensive and new tasks appeared.
meillo@87 179 Again, email systems grew, or they split parts off.
meillo@76 180 In nmh, for instance, the POP server, which the original MH had included,
meillo@76 181 was removed.
meillo@87 182 Now is the time to go one step further and remove the MSA and MRA, too.
meillo@87 183 Not only does this decrease the code size of the project,
meillo@87 184 but, more important, it unburdens mmh of the whole field of
meillo@87 185 message transfer with all its implications for the project.
meillo@87 186 There's no more need to concern with changes in network transfer.
meillo@76 187 This independence is received by depending on an external program
meillo@76 188 that covers the field.
meillo@76 189 Today, this is a reasonable exchange.
meillo@60 190 .P
meillo@87 191 Function can be added in three different ways:
meillo@87 192 .BU
meillo@87 193 Implementing the function originally in the project.
meillo@87 194 .BU
meillo@87 195 Depending on a library that provides the function.
meillo@87 196 .BU
meillo@87 197 Depending on a program that provides the function.
meillo@87 198 .P
meillo@87 199 Whereas adding the function originally to the project increases the
meillo@76 200 code size most and requires most maintenance and development work,
meillo@87 201 it makes the project most independent of other software.
meillo@87 202 Using libraries or external programs require less maintenance work
meillo@87 203 but introduces dependencies on external software.
meillo@87 204 Programs have the smallest interfaces and provide the best separation
meillo@87 205 but possibly limit the information exchange.
meillo@87 206 External libraries are stronger connected than external programs,
meillo@87 207 thus information can be exchanged more flexible.
meillo@87 208 Adding code to a project increases maintenance work.
meillo@87 209 .\" XXX ref
meillo@87 210 Implementing complex functions originally in the project will add
meillo@87 211 a lot of code.
meillo@87 212 This should be avoided if possible.
meillo@66 213 Hence, the dependencies only change in kind, not in their existence.
meillo@66 214 In mmh, library dependencies on
meillo@66 215 .Pn libsasl2
meillo@66 216 and
meillo@66 217 .Pn libcrypto /\c
meillo@66 218 .Pn libssl
meillo@66 219 were treated against program dependencies on an MSA and an MRA.
meillo@87 220 This also meant treating build-time dependencies against run-time
meillo@87 221 dependencies.
meillo@66 222 Besides program dependencies providing the stronger separation
meillo@66 223 and being more flexible, they also allowed
meillo@66 224 over 6\|000 lines of code to be removed from mmh.
meillo@66 225 This made mmh's code base about 12\|% smaller.
meillo@87 226 Reducing the project's code size by such an amount without actually
meillo@87 227 losing functionality is a convincing argument.
meillo@87 228 Actually, as external MSAs and MRAs are likely superior to the
meillo@87 229 project's internal versions, the common user even gains functionality.
meillo@66 230 .P
meillo@76 231 Users of MH should not have problems to set up an external MSA and MRA.
meillo@60 232 Also, the popular MSAs and MRAs have large communities and a lot
meillo@60 233 of documentation available.
meillo@87 234 Choices for MSAs range from full-featured MTAs like
meillo@60 235 .I Postfix
meillo@87 236 over mid-size MTAs like
meillo@60 237 .I masqmail
meillo@60 238 and
meillo@60 239 .I dma
meillo@60 240 to small forwarders like
meillo@60 241 .I ssmtp
meillo@60 242 and
meillo@60 243 .I nullmailer .
meillo@60 244 Choices for MRAs include
meillo@60 245 .I fetchmail ,
meillo@60 246 .I getmail ,
meillo@60 247 .I mpop
meillo@60 248 and
meillo@60 249 .I fdm .
meillo@60 250
meillo@60 251
meillo@60 252 .H2 "Removal of non-MUA Tools
meillo@60 253 .P
meillo@87 254 One goal of mmh is to remove the tools that are not part of the MUA's task.
meillo@89 255 Further more, any tools that don't improve the MUA's job significantly
meillo@87 256 should be removed.
meillo@87 257 Loosely related and rarely used tools distract from the lean appearance.
meillo@87 258 They require maintenance work without adding much to the core task.
meillo@87 259 On removing these tools, the project shall become more stream-lined
meillo@87 260 and focused.
meillo@76 261 In mmh the following tools are not available anymore:
meillo@62 262 .BU
meillo@58 263 .Pn conflict
meillo@87 264 was removed
meillo@76 265 .Ci 8b235097cbd11d728c07b966cf131aa7133ce5a9
meillo@87 266 because it is a mail system maintenance tool that is not MUA-related.
meillo@87 267 It even checked
meillo@58 268 .Fn /etc/passwd
meillo@58 269 and
meillo@58 270 .Fn /etc/group
meillo@87 271 for consistency, which is completely unrelated to email.
meillo@87 272 A tool like
meillo@87 273 .Pn conflict
meillo@87 274 is surely useful, but it should not be shipped with mmh.
meillo@76 275 .\" XXX historic reasons?
meillo@62 276 .BU
meillo@58 277 .Pn rcvtty
meillo@87 278 was removed
meillo@87 279 .Ci 14767c94b3827be7c867196467ed7aea5f6f49b0
meillo@89 280 because its use case of writing to the user's terminal
meillo@76 281 on receiving of mail is obsolete.
meillo@87 282 If users like to be informed of new mail, the shell's
meillo@58 283 .Ev MAILPATH
meillo@87 284 variable or graphical notifications are technically more appealing.
meillo@62 285 Writing directly to a terminals is hardly ever wanted today.
meillo@62 286 If though one wants to have it this way, the standard tool
meillo@58 287 .Pn write
meillo@58 288 can be used in a way similar to:
meillo@82 289 .VS
meillo@58 290 scan -file - | write `id -un`
meillo@82 291 VE
meillo@62 292 .BU
meillo@58 293 .Pn viamail
meillo@87 294 was removed
meillo@87 295 .Ci eda72d6a7a7c20ff123043fb7f19c509ea01f932
meillo@87 296 when the new attachment system was activated, because
meillo@58 297 .Pn forw
meillo@76 298 could then cover the task itself.
meillo@62 299 The program
meillo@58 300 .Pn sendfiles
meillo@62 301 was rewritten as a shell script wrapper around
meillo@58 302 .Pn forw .
meillo@76 303 .Ci 0e82199cf3c991a173e0ac8aa776efdb3ded61e6
meillo@62 304 .BU
meillo@58 305 .Pn msgchk
meillo@87 306 was removed
meillo@87 307 .Ci bb9360ead7eb7a3fedcce2eeedfc660014e41dbe ,
meillo@87 308 because it lost its use case when POP support was removed.
meillo@76 309 A call to
meillo@58 310 .Pn msgchk
meillo@87 311 provided hardly more information than:
meillo@82 312 .VS
meillo@58 313 ls -l /var/mail/meillo
meillo@82 314 VE
meillo@87 315 It did distinguished between old and new mail, but
meillo@87 316 this detail information and can be retrieved with
meillo@76 317 .Pn stat (1),
meillo@62 318 too.
meillo@62 319 A very small shell script could be written to output the information
meillo@76 320 in a similar way, if truly necessary.
meillo@76 321 As mmh's
meillo@76 322 .Pn inc
meillo@87 323 only incorporates mail from the user's local maildrop,
meillo@62 324 and thus no data transfers over slow networks are involved,
meillo@76 325 there's hardly any need to check for new mail before incorporating it.
meillo@62 326 .BU
meillo@58 327 .Pn msh
meillo@87 328 was removed
meillo@76 329 .Ci 916690191222433a6923a4be54b0d8f6ac01bd02
meillo@87 330 because the tool was in conflict with the philosophy of MH.
meillo@76 331 It provided an interactive shell to access the features of MH,
meillo@76 332 but it wasn't just a shell, tailored to the needs of mail handling.
meillo@76 333 Instead it was one large program that had several MH tools built in.
meillo@76 334 This conflicts with the major feature of MH of being a tool chest.
meillo@76 335 .Pn msh 's
meillo@76 336 main use case had been accessing Bulletin Boards, which have seized to
meillo@62 337 be popular.
meillo@62 338 .P
meillo@62 339 Removing
meillo@58 340 .Pn msh ,
meillo@76 341 together with the truly archaic code relicts
meillo@58 342 .Pn vmh
meillo@58 343 and
meillo@58 344 .Pn wmh ,
meillo@62 345 saved more than 7\|000 lines of C code \(en
meillo@66 346 about 15\|% of the project's original source code amount.
meillo@76 347 .P
meillo@76 348 Having less code (with equal readability, of course)
meillo@76 349 for the same functionality is an advantage.
meillo@63 350 Less code means less bugs and less maintenance work.
meillo@76 351 As
meillo@63 352 .Pn rcvtty
meillo@63 353 and
meillo@63 354 .Pn msgchk
meillo@87 355 are assumed to be rarely used and can be implemented in different ways,
meillo@87 356 why should one keep them?
meillo@76 357 Removing them stream-lines mmh.
meillo@63 358 .Pn viamail 's
meillo@63 359 use case is now partly obsolete and partly covered by
meillo@63 360 .Pn forw ,
meillo@76 361 hence there's no reason to still maintain it.
meillo@63 362 .Pn conflict
meillo@76 363 is not related to the mail client, and
meillo@63 364 .Pn msh
meillo@63 365 conflicts with the basic concept of MH.
meillo@76 366 Theses two tools might still be useful, but they should not be part of mmh.
meillo@63 367 .P
meillo@76 368 Finally, there's
meillo@76 369 .Pn slocal .
meillo@76 370 .Pn slocal
meillo@76 371 is an MDA and thus not directly MUA-related.
meillo@78 372 It should be removed, because including it is a violation
meillo@78 373 of the idea that mmh is a MUA only.
meillo@78 374 It should become a separate project.
meillo@87 375 However,
meillo@76 376 .Pn slocal
meillo@76 377 provides rule-based processing of messages, like filing them into
meillo@76 378 different folders, which is otherwise not available in mmh.
meillo@87 379 Although
meillo@76 380 .Pn slocal
meillo@87 381 does neither pull in dependencies nor does it include a separate
meillo@87 382 technical area (cf. Sec. XXX),
meillo@87 383 still it accounts for about 1\|000 lines of code that need to be maintained.
meillo@76 384 As
meillo@76 385 .Pn slocal
meillo@76 386 is almost self-standing, it should be split off into a separate project.
meillo@76 387 This would cut the strong connection between the MUA mmh and the MDA
meillo@76 388 .Pn slocal .
meillo@87 389 For anyone not using MH,
meillo@87 390 .Pn slocal
meillo@87 391 would become yet another independent MDA, like
meillo@87 392 .I procmail .
meillo@87 393 The need to install a complete MH system to have
meillo@87 394 .Pn slocal
meillo@87 395 would be gone.
meillo@76 396 Likewise, mmh users could decide to use
meillo@76 397 .I procmail
meillo@87 398 without having a second, unused MDA,
meillo@87 399 .Pn slocal ,
meillo@76 400 installed.
meillo@76 401 That's conceptionally the best solution.
meillo@76 402 Yet,
meillo@76 403 .Pn slocal
meillo@87 404 is not split off.
meillo@87 405 I feel unsure with removing it from mmh.
meillo@87 406 Hence, I defer the decision over
meillo@87 407 .Pn slocal .
meillo@87 408 In the meanwhile
meillo@78 409 .Pn slocal
meillo@87 410 does not hurt because it is unrelated to the rest of mmh.
meillo@0 411
meillo@58 412
meillo@76 413 .H2 "\fLshow\fP and \fPmhshow\fP
meillo@58 414 .P
meillo@69 415 Since the very beginning \(en already in the first concept paper \(en
meillo@58 416 .Pn show
meillo@62 417 had been MH's message display program.
meillo@58 418 .Pn show
meillo@76 419 mapped message numbers and sequences to files and invoked
meillo@58 420 .Pn mhl
meillo@89 421 to have the files formatted.
meillo@88 422 With MIME, this approach wasn't sufficient anymore.
meillo@58 423 MIME messages can consist of multiple parts, some of which aren't
meillo@88 424 directly displayable, further more text content might be encoded in
meillo@58 425 foreign charsets.
meillo@58 426 .Pn show 's
meillo@76 427 understanding of messages and
meillo@58 428 .Pn mhl 's
meillo@88 429 display capabilities couldn't cope with the task any longer.
meillo@62 430 .P
meillo@88 431 Instead of extending these tools, additional tools were written from
meillo@88 432 scratch and added to the MH tool chest.
meillo@88 433 Doing so is encouraged by the tool chest approach.
meillo@88 434 Modular design is a great advantage for extending a system,
meillo@88 435 as new tools can be added without interfering with existing ones.
meillo@62 436 First, the new MIME features were added in form of the single program
meillo@58 437 .Pn mhn .
meillo@58 438 The command
meillo@82 439 .Cl "mhn -show 42
meillo@58 440 would show the MIME message numbered 42.
meillo@58 441 With the 1.0 release of nmh in February 1999, Richard Coleman finished
meillo@58 442 the split of
meillo@58 443 .Pn mhn
meillo@88 444 into a set of specialized tools, which together covered the
meillo@88 445 multiple aspects of MIME.
meillo@88 446 One of them was
meillo@69 447 .Pn mhshow ,
meillo@88 448 which replaced
meillo@88 449 .Cl "mhn -show" .
meillo@88 450 It was capable of displaying MIME messages appropriately.
meillo@62 451 .P
meillo@88 452 From then on, two message display tools were part of nmh,
meillo@76 453 .Pn show
meillo@76 454 and
meillo@76 455 .Pn mhshow .
meillo@88 456 To ease the life of users,
meillo@69 457 .Pn show
meillo@69 458 was extended to automatically hand the job over to
meillo@69 459 .Pn mhshow
meillo@69 460 if displaying the message would be beyond
meillo@69 461 .Pn show 's
meillo@69 462 abilities.
meillo@88 463 In consequence, the user would simply invoke
meillo@69 464 .Pn show
meillo@69 465 (possibly through
meillo@69 466 .Pn next
meillo@69 467 or
meillo@69 468 .Pn prev )
meillo@69 469 and get the message printed with either
meillo@69 470 .Pn show
meillo@69 471 or
meillo@69 472 .Pn mhshow ,
meillo@69 473 whatever was more appropriate.
meillo@69 474 .P
meillo@69 475 Having two similar tools for essentially the same task is redundant.
meillo@88 476 Usually,
meillo@88 477 users wouldn't distinguish between
meillo@88 478 .Pn show
meillo@88 479 and
meillo@88 480 .Pn mhshow
meillo@88 481 in their daily mail reading.
meillo@88 482 Having two separate display programs was therefore mainly unnecessary
meillo@88 483 from a user's point of view.
meillo@88 484 Besides, the development of both programs needed to be in sync,
meillo@76 485 to ensure that the programs behaved in a similar way,
meillo@76 486 because they were used like a single tool.
meillo@76 487 Different behavior would have surprised the user.
meillo@69 488 .P
meillo@69 489 Today, non-MIME messages are rather seen to be a special case of
meillo@88 490 MIME messages, although it's the other way round.
meillo@69 491 As
meillo@69 492 .Pn mhshow
meillo@88 493 had already be able to display non-MIME messages, it appeared natural
meillo@69 494 to drop
meillo@69 495 .Pn show
meillo@69 496 in favor of using
meillo@69 497 .Pn mhshow
meillo@69 498 exclusively.
meillo@88 499 .Ci 4c1efddfd499300c7e74263e57d8aa137e84c853
meillo@88 500 Removing
meillo@88 501 .Pn show
meillo@88 502 is no loss in function, because functionally
meillo@88 503 .Pn mhshow
meillo@88 504 covers it completely.
meillo@88 505 The old behavior of
meillo@88 506 .Pn show
meillo@88 507 can still be emulated with the simple command line:
meillo@88 508 .VS
meillo@88 509 mhl `mhpath c`
meillo@88 510 VE
meillo@88 511 .P
meillo@76 512 For convenience,
meillo@76 513 .Pn mhshow
meillo@88 514 was renamed to
meillo@88 515 .Pn show
meillo@88 516 after
meillo@88 517 .Pn show
meillo@88 518 was gone.
meillo@88 519 It is clear that such a rename may confuse future developers when
meillo@88 520 trying to understand the history.
meillo@88 521 Nevertheless, I consider the convenience on the user's side,
meillo@88 522 to call
meillo@88 523 .Pn show
meillo@88 524 when they want a message to be displayed, to outweigh the inconvenience
meillo@88 525 on the developer's side when understanding the project history.
meillo@69 526 .P
meillo@88 527 To prepare for the transition,
meillo@69 528 .Pn mhshow
meillo@69 529 was reworked to behave more like
meillo@69 530 .Pn show
meillo@69 531 first.
meillo@88 532 (cf. Sec. XXX)
meillo@88 533 Once the tools behaved more alike, the replacing appeared to be
meillo@88 534 even more natural.
meillo@88 535 Today, mmh's new
meillo@69 536 .Pn show
meillo@88 537 became the one single message display program again, with the difference
meillo@88 538 that today it handles MIME messages as well as non-MIME messages.
meillo@88 539 The outcome of the transition is one program less to maintain,
meillo@88 540 no second display program for users to deal with,
meillo@88 541 and less system complexity.
meillo@69 542 .P
meillo@88 543 Still, removing the old
meillo@69 544 .Pn show
meillo@88 545 hurts in one regard: It had been such a simple program.
meillo@88 546 Its lean elegance is missing to the new
meillo@69 547 .Pn show .
meillo@88 548 But there is no chance;
meillo@88 549 supporting MIME demands for higher essential complexity.
meillo@58 550
meillo@58 551
meillo@58 552 .H2 "Removal of Configure Options
meillo@58 553 .P
meillo@76 554 Customization is a double-edged sword.
meillo@76 555 It allows better suiting setups, but not for free.
meillo@76 556 There is the cost of code complexity to be able to customize.
meillo@76 557 There is the cost of less tested setups, because there are
meillo@72 558 more possible setups and especially corner-cases.
meillo@76 559 And, there is the cost of choice itself.
meillo@76 560 The code complexity directly affects the developers.
meillo@72 561 Less tested code affects both, users and developers.
meillo@76 562 The problem of choice affects the users, for once by having to
meillo@76 563 choose, but also by complexer interfaces that require more documentation.
meillo@72 564 Whenever options add little advantages, they should be considered for
meillo@72 565 removal.
meillo@72 566 I have reduced the number of project-specific configure options from
meillo@72 567 fifteen to three.
meillo@74 568
meillo@76 569 .U3 "Mail Transfer Facilities
meillo@74 570 .P
meillo@85 571 With the removal of the mail transfer facilities five configure
meillo@85 572 options vanished:
meillo@85 573 .P
meillo@85 574 The switches
meillo@85 575 .Sw --with-tls
meillo@85 576 and
meillo@85 577 .Sw --with-cyrus-sasl
meillo@89 578 had activated the support for transfer encryption and authentication.
meillo@85 579 This is not needed anymore.
meillo@85 580 .Ci fecd5d34f65597a4dfa16aeabea7d74b191532c3
meillo@85 581 .Ci 156d35f6425bea4c1ed3c4c79783dc613379c65b
meillo@85 582 .P
meillo@85 583 The configure switch
meillo@85 584 .Sw --enable-pop
meillo@85 585 activated the message retrieval facility.
meillo@85 586 The code area that would be conditionally compiled in for TLS and SASL
meillo@85 587 support had been small.
meillo@85 588 The conditionally compiled code area for POP support had been much larger.
meillo@85 589 Whereas the code base changes would only slightly change on toggling
meillo@85 590 TLS or SASL support, it changed much on toggling POP support.
meillo@85 591 The changes in the code base could hardly be overviewed.
meillo@85 592 By having POP support togglable a second code base had been created,
meillo@85 593 one that needed to be tested.
meillo@85 594 This situation is basically similar for the conditional TLS and SASL
meillo@85 595 code, but there the changes are minor and can yet be overviewed.
meillo@85 596 Still, conditional compilation of a code base creates variations
meillo@85 597 of the original program.
meillo@85 598 More variations require more testing and maintenance work.
meillo@85 599 .P
meillo@85 600 Two other options only specified default configuration values:
meillo@85 601 .Sw --with-mts=[smtp|sendmail]
meillo@85 602 defined the default transport service.
meillo@85 603 In mmh this fixed to
meillo@85 604 .Ar sendmail .
meillo@85 605 .Ci f6aa95b724fd8c791164abe7ee5468bf5c34f226
meillo@85 606 With
meillo@85 607 .Sw --with-smtpservers=[server1...]
meillo@85 608 default SMTP servers for the
meillo@85 609 .Ar smtp
meillo@85 610 transport service could be specified.
meillo@72 611 .Ci 128545e06224233b7e91fc4c83f8830252fe16c9
meillo@85 612 Both of them became irrelevant.
meillo@72 613
meillo@74 614 .U3 "Backup Prefix
meillo@74 615 .P
meillo@76 616 The backup prefix is the string that was prepended to message
meillo@76 617 filenames to tag them as deleted.
meillo@76 618 By default it had been the comma character `\f(CW,\fP'.
meillo@78 619 In July 2000, Kimmo Suominen introduced
meillo@78 620 the configure option
meillo@78 621 .Sw --with-hash-backup
meillo@78 622 to change the default to the hash symbol `\f(CW#\fP'.
meillo@78 623 The choice was probably personal preference, because first, the
meillo@78 624 option was named
meillo@78 625 .Sw --with-backup-prefix.
meillo@78 626 and had the prefix symbol as argument.
meillo@78 627 Because giving the hash symbol as argument caused to many problems
meillo@78 628 for configure,
meillo@78 629 the option was limited to use the hash symbol as the default prefix.
meillo@78 630 This makes me believe, that the choice for the hash was personal preference.
meillo@78 631 Being it related or not, words that start with the hash symbol
meillo@78 632 introduce a comment in the Unix shell.
meillo@72 633 Thus, the command line
meillo@72 634 .Cl "rm #13 #15
meillo@72 635 calls
meillo@72 636 .Pn rm
meillo@72 637 without arguments because the first hash symbol starts the comment
meillo@72 638 that reaches until the end of the line.
meillo@72 639 To delete the backup files,
meillo@72 640 .Cl "rm ./#13 ./#15"
meillo@72 641 needs to be used.
meillo@78 642 Using the hash as backup prefix can be seen as a precaution agains
meillo@78 643 data loss.
meillo@78 644 .P
meillo@72 645 I removed the configure option but added the profile entry
meillo@72 646 .Pe backup-prefix ,
meillo@72 647 which allows to specify an arbitrary string as backup prefix.
meillo@72 648 .Ci 6c40d481d661d532dd527eaf34cebb6d3f8ed086
meillo@76 649 Profile entries are the common method to change mmh's behavior.
meillo@76 650 This change did not remove the choice but moved it to a location where
meillo@72 651 it suited better.
meillo@76 652 .P
meillo@78 653 Eventually, however, the new trash folder concept
meillo@78 654 .Cf "Sec. XXX
meillo@78 655 obsoleted the concept of the backup prefix completely.
meillo@78 656 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
meillo@72 657 (Well, there still are corner-cases to remove until the backup
meillo@89 658 prefix can be laid to rest, eventually.)
meillo@72 659 .\" FIXME: Do this work in the code!
meillo@76 660
meillo@76 661 .U3 "Editor and Pager
meillo@74 662 .P
meillo@74 663 The two configure options
meillo@74 664 .CW --with-editor=EDITOR
meillo@74 665 .CW --with-pager=PAGER
meillo@74 666 were used to specify the default editor and pager at configure time.
meillo@74 667 Doing so at configure time made sense in the Eighties,
meillo@76 668 when the set of available editors and pagers varied much across
meillo@76 669 different systems.
meillo@89 670 Today, the situation is more homogeneous.
meillo@74 671 The programs
meillo@74 672 .Pn vi
meillo@74 673 and
meillo@74 674 .Pn more
meillo@76 675 can be expected to be available on every Unix system,
meillo@74 676 as they are specified by POSIX since two decades.
meillo@74 677 (The specifications for
meillo@74 678 .Pn vi
meillo@74 679 and
meillo@74 680 .Pn more
meillo@74 681 appeared in
meillo@74 682 .[
meillo@74 683 posix 1987
meillo@74 684 .]
meillo@74 685 and,
meillo@74 686 .[
meillo@74 687 posix 1992
meillo@74 688 .]
meillo@74 689 respectively.)
meillo@74 690 As a first step, these two tools were hard-coded as defaults.
meillo@74 691 .Ci 5d43a99db70c12a673028c7758c20cbe3e13ef5f
meillo@74 692 Not changed were the
meillo@74 693 .Pe editor
meillo@74 694 and
meillo@74 695 .Pe moreproc
meillo@76 696 profile entries, which allowed the user to override the system defaults.
meillo@74 697 Later, the concept was reworked to respect the standard environment
meillo@74 698 variables
meillo@74 699 .Ev VISUAL
meillo@74 700 and
meillo@74 701 .Ev PAGER
meillo@76 702 if they are set.
meillo@74 703 Today, mmh determines the editor to use in the following order,
meillo@74 704 taking the first available and non-empty item:
meillo@74 705 .IP (1)
meillo@74 706 Environment variable
meillo@74 707 .Ev MMHEDITOR
meillo@74 708 .IP (2)
meillo@74 709 Profile entry
meillo@74 710 .Pe Editor
meillo@74 711 .IP (3)
meillo@74 712 Environment variable
meillo@74 713 .Ev VISUAL
meillo@74 714 .IP (4)
meillo@74 715 Environment variable
meillo@74 716 .Ev EDITOR
meillo@74 717 .IP (5)
meillo@74 718 Command
meillo@74 719 .Pn vi .
meillo@74 720 .P
meillo@76 721 .Ci f85f4b7ae62e3d05a945dcd46ead51f0a2a89a9b
meillo@76 722 .P
meillo@89 723 The pager to use is determined in a similar order,
meillo@74 724 also taking the first available and non-empty item:
meillo@74 725 .IP (1)
meillo@74 726 Environment variable
meillo@74 727 .Ev MMHPAGER
meillo@74 728 .IP (2)
meillo@74 729 Profile entry
meillo@74 730 .Pe Pager
meillo@74 731 (replaces
meillo@74 732 .Pe moreproc )
meillo@74 733 .IP (3)
meillo@74 734 Environment variable
meillo@74 735 .Ev PAGER
meillo@74 736 .IP (4)
meillo@74 737 Command
meillo@74 738 .Pn more .
meillo@74 739 .P
meillo@74 740 .Ci 0c4214ea2aec6497d0d67b436bbee9bc1d225f1e
meillo@74 741 .P
meillo@76 742 By respecting the
meillo@74 743 .Ev VISUAL /\c
meillo@74 744 .Ev EDITOR
meillo@74 745 and
meillo@74 746 .Ev PAGER
meillo@76 747 environment variables,
meillo@76 748 the new behavior confirms better to the common style on Unix systems.
meillo@76 749 Additionally, the new approach is more uniform and clearer to users.
meillo@72 750
meillo@74 751 .U3 "Locale
meillo@74 752 .P
meillo@74 753 The configure option
meillo@74 754 .Sw --disable-locale
meillo@85 755 was removed because POSIX provides locale support and there's
meillo@85 756 hardly any need to disable locale support.
meillo@74 757 .Ci ccf4f175ef4c4e7522f9510a4a1149c15d810dd9
meillo@72 758
meillo@76 759 .U3 "ndbm
meillo@72 760 .P
meillo@74 761 .Pn slocal
meillo@78 762 used to depend on
meillo@74 763 .I ndbm ,
meillo@74 764 a database library.
meillo@76 765 The database is used to store the `\fLMessage-ID\fP's of all
meillo@76 766 messages delivered.
meillo@74 767 This enables
meillo@74 768 .Pn slocal
meillo@74 769 to suppress delivering the same message to the same user twice.
meillo@74 770 (This features was enabled by the
meillo@74 771 .Sw -suppressdup
meillo@74 772 switch.)
meillo@74 773 .P
meillo@74 774 A variety of version of the database library exist.
meillo@78 775 .[
meillo@78 776 wolter unix incompat notes dbm
meillo@78 777 .]
meillo@74 778 Complicated autoconf code was needed to detect them correctly.
meillo@74 779 Further more, the configure switches
meillo@74 780 .Sw --with-ndbm=ARG
meillo@74 781 and
meillo@74 782 .Sw --with-ndbmheader=ARG
meillo@74 783 were added to help with difficult setups that would
meillo@78 784 not be detected automatically or correctly.
meillo@74 785 .P
meillo@74 786 By removing the suppress duplicates feature of
meillo@74 787 .Pn slocal ,
meillo@74 788 the dependency on
meillo@74 789 .I ndbm
meillo@78 790 vanished and 120 lines of complex autoconf code could be saved.
meillo@74 791 .Ci ecd6d6a20cb7a1507e3a20d6c4cb3a1cf14c6bbf
meillo@89 792 The change removed functionality too, but that is minor to the
meillo@78 793 improvement by dropping the dependency and the complex autoconf code.
meillo@72 794
meillo@74 795 .U3 "mh-e Support
meillo@72 796 .P
meillo@74 797 The configure option
meillo@74 798 .Sw --disable-mhe
meillo@74 799 was removed when the mh-e support was reworked.
meillo@74 800 Mh-e is the Emacs front-end to MH.
meillo@76 801 It requires MH to provide minor additional functions.
meillo@76 802 The
meillo@76 803 .Sw --disable-mhe
meillo@76 804 configure option could switch these extensions off.
meillo@76 805 After removing the support for old versions of mh-e,
meillo@74 806 only the
meillo@74 807 .Sw -build
meillo@76 808 switches of
meillo@74 809 .Pn forw
meillo@74 810 and
meillo@74 811 .Pn repl
meillo@76 812 are left to be mh-e extensions.
meillo@76 813 They are now always built in because they add little code and complexity.
meillo@76 814 In consequence, the
meillo@74 815 .Sw --disable-mhe
meillo@76 816 configure option was removed
meillo@72 817 .Ci a7ce7b4a580d77b6c2c4d980812beb589aa4c643
meillo@74 818 Removing the option removed a second code setup that would have
meillo@74 819 needed to be tested.
meillo@76 820 This change was first done in nmh and thereafter merged into mmh.
meillo@76 821 .P
meillo@76 822 The interface changes in mmh require mh-e to be adjusted in order
meillo@76 823 to be able to use mmh as back-end.
meillo@76 824 This will require minor changes to mh-e, but removing the
meillo@76 825 .Sw -build
meillo@76 826 switches would require more rework.
meillo@72 827
meillo@74 828 .U3 "Masquerading
meillo@72 829 .P
meillo@74 830 The configure option
meillo@74 831 .Sw --enable-masquerade
meillo@76 832 could take up to three arguments:
meillo@76 833 `draft_from', `mmailid', and `username_extension'.
meillo@74 834 They activated different types of address masquerading.
meillo@74 835 All of them were implemented in the SMTP-speaking
meillo@74 836 .Pn post
meillo@76 837 command, which provided an MSA.
meillo@76 838 Address masquerading is an MTA's task and mmh does not cover
meillo@76 839 this field anymore.
meillo@76 840 Hence, true masquerading needs to be implemented in the external MTA.
meillo@74 841 .P
meillo@74 842 The
meillo@74 843 .I mmailid
meillo@74 844 masquerading type is the oldest one of the three and the only one
meillo@74 845 available in the original MH.
meillo@74 846 It provided a
meillo@74 847 .I username
meillo@74 848 to
meillo@74 849 .I fakeusername
meillo@76 850 mapping, based on the password file's GECOS field.
meillo@74 851 The man page
meillo@74 852 .Mp mh-tailor(5)
meillo@74 853 described the use case as being the following:
meillo@74 854 .QP
meillo@74 855 This is useful if you want the messages you send to always
meillo@74 856 appear to come from the name of an MTA alias rather than your
meillo@74 857 actual account name. For instance, many organizations set up
meillo@74 858 `First.Last' sendmail aliases for all users. If this is
meillo@74 859 the case, the GECOS field for each user should look like:
meillo@74 860 ``First [Middle] Last <First.Last>''
meillo@74 861 .P
meillo@74 862 As mmh sends outgoing mail via the local MTA only,
meillo@76 863 the best location to do such global rewrites is there.
meillo@74 864 Besides, the MTA is conceptionally the right location because it
meillo@74 865 does the reverse mapping for incoming mail (aliasing), too.
meillo@76 866 Further more, masquerading set up there is readily available for all
meillo@74 867 mail software on the system.
meillo@76 868 Hence, mmailid masquerading was removed.
meillo@74 869 .Ci 0836c8000ccb34b59410ef1c15b1b7feac70ce5f
meillo@74 870 .P
meillo@74 871 The
meillo@74 872 .I username_extension
meillo@76 873 masquerading type did not replace the username but would append a suffix,
meillo@76 874 specified by the
meillo@74 875 .Ev USERNAME_EXTENSION
meillo@76 876 environment variable, to it.
meillo@76 877 This provided support for the
meillo@74 878 .I user-extension
meillo@74 879 feature of qmail and the similar
meillo@74 880 .I "plussed user
meillo@74 881 processing of sendmail.
meillo@74 882 The decision to remove this username_extension masquerading was
meillo@74 883 motivated by the fact that
meillo@74 884 .Pn spost
meillo@76 885 hadn't supported it already.
meillo@76 886 .Ci 2abae0bfd0ad5bf898461e50aa4b466d641f23d9
meillo@76 887 Username extensions are possible in mmh, but less convenient to use.
meillo@76 888 .\" XXX format file %(getenv USERNAME_EXTENSION)
meillo@74 889 .P
meillo@74 890 The
meillo@74 891 .I draft_from
meillo@74 892 masquerading type instructed
meillo@74 893 .Pn post
meillo@84 894 to use the value of the
meillo@84 895 .Hd From
meillo@84 896 header field as SMTP envelope sender.
meillo@76 897 Sender addresses could be replaced completely.
meillo@74 898 .Ci b14ea6073f77b4359aaf3fddd0e105989db9
meillo@76 899 Mmh offers a kind of masquerading similar in effect, but
meillo@74 900 with technical differences.
meillo@76 901 As mmh does not transfer messages itself, the local MTA has final control
meillo@76 902 over the sender's address. Any masquerading mmh introduces may be reverted
meillo@76 903 by the MTA.
meillo@76 904 In times of pedantic spam checking, an MTA will take care to use
meillo@76 905 sensible envelope sender addresses to keep its own reputation up.
meillo@84 906 Nonetheless, the MUA can set the
meillo@84 907 .Hd From
meillo@84 908 header field and thereby propose
meillo@76 909 a sender address to the MTA.
meillo@74 910 The MTA may then decide to take that one or generate the canonical sender
meillo@74 911 address for use as envelope sender address.
meillo@74 912 .P
meillo@74 913 In mmh, the MTA will always extract the recipient and sender from the
meillo@84 914 message header (\c
meillo@74 915 .Pn sendmail 's
meillo@74 916 .Sw -t
meillo@74 917 switch).
meillo@84 918 The
meillo@84 919 .Hd From
meillo@84 920 header field of the draft may be set arbitrary by the user.
meillo@74 921 If it is missing, the canonical sender address will be generated by the MTA.
meillo@74 922
meillo@74 923 .U3 "Remaining Options
meillo@74 924 .P
meillo@74 925 Two configure options remain in mmh.
meillo@74 926 One is the locking method to use:
meillo@74 927 .Sw --with-locking=[dot|fcntl|flock|lockf] .
meillo@76 928 The idea of removing all methods except the portable dot locking
meillo@76 929 and having that one as the default is appealing, but this change
meillo@76 930 requires deeper technical investigation into the topic.
meillo@76 931 The other option,
meillo@74 932 .Sw --enable-debug ,
meillo@74 933 compiles the programs with debugging symbols and does not strip them.
meillo@74 934 This option is likely to stay.
meillo@72 935
meillo@72 936
meillo@58 937
meillo@63 938
meillo@93 939 .H2 "Removal of Switches
meillo@58 940 .P
meillo@93 941 The command line switches of MH tools follow the X Window style.
meillo@93 942 They are words, introduced by a single dash.
meillo@93 943 For example:
meillo@93 944 .Cl "-truncate" .
meillo@93 945 Every program in mmh has two generic switches:
meillo@93 946 .Sw -help ,
meillo@93 947 to print a short message on how to use the program, and
meillo@93 948 .Sw -Version ,
meillo@93 949 to tell what version of mmh the program belongs to.
meillo@93 950 .P
meillo@93 951 Switches change the behavior of programs.
meillo@93 952 Programs that do one thing in one way require no switches.
meillo@93 953 In most cases, doing something in exactly one way is too limiting.
meillo@97 954 If there is basically one task to accomplish, but it should be done
meillo@93 955 in various ways, switches are a good approach to alter the behavior
meillo@93 956 of a program.
meillo@93 957 Changing the behavior of programs provides flexibility and customization
meillo@97 958 to users, but at the same time it complicates the code, documentation and
meillo@93 959 usage of the program.
meillo@97 960 .\" XXX: Ref
meillo@93 961 Therefore, the number of switches should be kept small.
meillo@93 962 A small set of well-chosen switches does no harm.
meillo@93 963 But usually, the number of switches increases over time.
meillo@93 964 Already in 1985, Rose and Romine have identified this as a major
meillo@93 965 problem of MH:
meillo@93 966 .[ [
meillo@93 967 rose romine real work
meillo@93 968 .], p. 12]
meillo@93 969 .sp
meillo@93 970 .QP
meillo@93 971 A complaint often heard about systems which undergo substantial development
meillo@93 972 by many people over a number of years, is that more and more options are
meillo@93 973 introduced which add little to the functionality but greatly increase the
meillo@93 974 amount of information a user needs to know in order to get useful work done.
meillo@93 975 This is usually referred to as creeping featurism.
meillo@93 976 .QP
meillo@93 977 Unfortunately MH, having undergone six years of off-and-on development by
meillo@93 978 ten or so well-meaning programmers (the present authors included),
meillo@93 979 suffers mightily from this.
meillo@93 980 .sp
meillo@93 981 .P
meillo@97 982 Being reluctant to adding new switches \(en or `options',
meillo@97 983 as Rose and Romine call them \(en is one part of a counter-action,
meillo@97 984 the other part is removing hardly used switches.
meillo@97 985 Nmh's tools had lots of switches already implemented,
meillo@97 986 hence, cleaning up by removing some of them was the more important part
meillo@97 987 of the counter-action.
meillo@93 988 Removing existing functionality is always difficult because it
meillo@93 989 breaks programs that use these functions.
meillo@93 990 Also, for every obsolete feature, there'll always be someone who still
meillo@93 991 uses it and thus opposes its removal.
meillo@93 992 This puts the developer into the position,
meillo@93 993 where sensible improvements to style are regarded as destructive acts.
meillo@97 994 Yet, living with the featurism is far worse, in my eyes, because
meillo@97 995 future needs will demand adding further features,
meillo@93 996 worsening the situation more and more.
meillo@93 997 Rose and Romine added in a footnote,
meillo@93 998 ``[...]
meillo@93 999 .Pn send
meillo@93 1000 will no doubt acquire an endless number of switches in the years to come.''
meillo@97 1001 Although clearly humorous, the comment points to the nature of the problem.
meillo@97 1002 Refusing to add any new switches would encounter the problem at its root,
meillo@97 1003 but this is not practical.
meillo@97 1004 New needs will require new switches and it would be unwise to block
meillo@97 1005 them strictly.
meillo@97 1006 Nevertheless, removing obsolete switches still is an effective approach
meillo@97 1007 to deal with the problem.
meillo@97 1008 Working on an experimental branch without an established user base,
meillo@97 1009 eased my work because I did not offend users when I removed existing
meillo@97 1010 funtions.
meillo@93 1011 .P
meillo@93 1012 Rose and Romine counted 24 visible and 9 more hidden switches for
meillo@93 1013 .Pn send .
meillo@97 1014 In nmh, they increased up to 32 visible and 12 hidden ones.
meillo@97 1015 At the time of writing, no more than 7 visible switches and 1 hidden switch
meillo@97 1016 have remained in mmh's
meillo@97 1017 .Pn send .
meillo@97 1018 (These numbers include two generic switches, help and version.)
meillo@93 1019 .P
meillo@97 1020 Fig. XXX
meillo@93 1021 .\" XXX Ref
meillo@97 1022 displays the number of switches for each of the tools that is available
meillo@97 1023 in both, nmh and mmh.
meillo@97 1024 Visible as well as hidden switches were counted,
meillo@97 1025 but not the generic help and version switches.
meillo@93 1026 Whereas in the beginning of the project, the average tool had 11 switches,
meillo@93 1027 now it has no more than 5 \(en only half as many.
meillo@93 1028 If the `no' switches and similar inverse variant are folded onto
meillo@97 1029 their counter-parts, the average tool has 8 switches in pre-mmh to 4 now.
meillo@93 1030 The total number of functional switches in mmh dropped from 465
meillo@93 1031 to 234.
meillo@58 1032
meillo@93 1033 .KS
meillo@93 1034 .in 1c
meillo@93 1035 .so input/switches.grap
meillo@93 1036 .KE
meillo@58 1037
meillo@93 1038 .P
meillo@93 1039 A part of the switches vanished after functions were removed.
meillo@93 1040 This was the case for network mail transfer, for instance.
meillo@97 1041 Sometimes, however, the work flow was the other way:
meillo@97 1042 I looked through the
meillo@97 1043 .Mp mh-chart (7)
meillo@97 1044 man page to identify the tools with apparently too many switches.
meillo@97 1045 Then considering the value of each of the switches by examining
meillo@97 1046 the tool's man page and source code, aided by recherche and testing.
meillo@97 1047 This way, the removal of functions was suggested by the aim to reduce
meillo@97 1048 the number of switches per command.
meillo@97 1049
meillo@58 1050
meillo@93 1051 .U3 "Draft Folder Facility
meillo@93 1052 .P
meillo@93 1053 A change early in the project was the completely transition from
meillo@93 1054 the single draft message to the draft folder facility.
meillo@97 1055 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
meillo@93 1056 The draft folder facility was introduced in the mid-Eighties.
meillo@93 1057 (Rose and Romine called it a ``relatively new feature''
meillo@93 1058 .[
meillo@93 1059 rose romine real work
meillo@93 1060 .]
meillo@93 1061 in 1985.)
meillo@97 1062 Since then, the facility had existed but was deactivated by default.
meillo@93 1063 The default activation and the related rework of the tools made it
meillo@93 1064 possible to remove the
meillo@93 1065 .Sw -[no]draftfolder ,
meillo@93 1066 and
meillo@93 1067 .Sw -draftmessage
meillo@93 1068 switches from
meillo@93 1069 .Pn comp ,
meillo@93 1070 .Pn repl ,
meillo@93 1071 .Pn forw ,
meillo@93 1072 .Pn dist ,
meillo@93 1073 .Pn whatnow ,
meillo@93 1074 and
meillo@93 1075 .Pn send .
meillo@97 1076 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
meillo@97 1077 The only flexibility removed with this change is having multiple
meillo@97 1078 draft folders within one profile.
meillo@97 1079 I consider this a theoretical problem only.
meillo@93 1080 In the same go, the
meillo@93 1081 .Sw -draft
meillo@93 1082 switch of
meillo@93 1083 .Pn anno ,
meillo@93 1084 .Pn refile ,
meillo@93 1085 and
meillo@93 1086 .Pn send
meillo@93 1087 was removed.
meillo@93 1088 The special-casing of `the' draft message became irrelevant after
meillo@93 1089 the rework of the draft system.
meillo@93 1090 (See Sec. XXX.)
meillo@95 1091 Equally,
meillo@95 1092 .Pn comp
meillo@95 1093 lost its
meillo@95 1094 .Sw -file
meillo@95 1095 switch.
meillo@95 1096 The draft folder facility, together with the
meillo@95 1097 .Sw -form
meillo@95 1098 switch, are sufficient.
meillo@93 1099
meillo@95 1100
meillo@95 1101 .U3 "Inplace Editing
meillo@93 1102 .P
meillo@93 1103 .Pn anno
meillo@93 1104 had the switches
meillo@93 1105 .Sw -[no]inplace
meillo@93 1106 to either annotate the message inplace and thus preserve hard links,
meillo@93 1107 or annotate a copy to replace the original message, breaking hard links.
meillo@97 1108 Following the assumption that linked messages should truly be the
meillo@97 1109 same message, and annotating it should not break the link, the
meillo@93 1110 .Sw -[no]inplace
meillo@93 1111 switches were removed and the previous default
meillo@93 1112 .Sw -inplace
meillo@93 1113 was made the only behavior.
meillo@97 1114 .Ci c8195849d2e366c569271abb0f5f60f4ebf0b4d0
meillo@93 1115 The
meillo@93 1116 .Sw -[no]inplace
meillo@93 1117 switches of
meillo@93 1118 .Pn repl ,
meillo@93 1119 .Pn forw ,
meillo@93 1120 and
meillo@93 1121 .Pn dist
meillo@93 1122 could be removed, too, as they were simply passed through to
meillo@93 1123 .Pn anno .
meillo@93 1124 .P
meillo@93 1125 .Pn burst
meillo@93 1126 also had
meillo@93 1127 .Sw -[no]inplace
meillo@95 1128 switches, but with different meaning.
meillo@95 1129 With
meillo@95 1130 .Sw -inplace ,
meillo@95 1131 the digest had been replaced by the table of contents (i.e. the
meillo@95 1132 introduction text) and the bursted messages were placed right
meillo@95 1133 after this message, renumbering all following messages.
meillo@95 1134 Also, any trailing text of the digest was lost, though,
meillo@95 1135 in practice, it usually consists of an end-of-digest marker only.
meillo@95 1136 Nontheless, this behavior appeared less elegant than the
meillo@95 1137 .Sw -noinplace
meillo@95 1138 behavior, which already had been the default.
meillo@95 1139 Nmh's
meillo@95 1140 .Mp burst (1)
meillo@95 1141 man page reads:
meillo@95 1142 .sp \n(PDu
meillo@93 1143 .QP
meillo@93 1144 If -noinplace is given, each digest is preserved, no table
meillo@93 1145 of contents is produced, and the messages contained within
meillo@93 1146 the digest are placed at the end of the folder. Other messages
meillo@93 1147 are not tampered with in any way.
meillo@95 1148 .sp \n(PDu
meillo@95 1149 .LP
meillo@93 1150 The decision to drop the
meillo@93 1151 .Sw -inplace
meillo@95 1152 behavior was supported by the code complexity and the possible data loss
meillo@95 1153 it caused.
meillo@93 1154 .Sw -noinplace
meillo@95 1155 was chosen to be the definitive behavior.
meillo@97 1156 .Ci 68a686adeb39223a5e1ad35e4a24890ec053679d
meillo@93 1157
meillo@95 1158
meillo@95 1159 .U3 "Forms and Format Strings
meillo@93 1160 .P
meillo@95 1161 Historically, the tools that had
meillo@95 1162 .Sw -form
meillo@95 1163 switches to supply a form file had
meillo@95 1164 .Sw -format
meillo@95 1165 switches as well to supply the contents of a form file as a string
meillo@95 1166 on the command line directly.
meillo@95 1167 In consequence, the following two lines equaled:
meillo@95 1168 .VS
meillo@95 1169 scan -form scan.mailx
meillo@95 1170 scan -format "`cat .../scan.mailx`"
meillo@95 1171 VE
meillo@95 1172 The
meillo@95 1173 .Sw -format
meillo@95 1174 switches were dropped in favor for extending the
meillo@95 1175 .Sw -form
meillo@95 1176 switches.
meillo@97 1177 .Ci f51956be123db66b00138f80464d06f030dbb88d
meillo@95 1178 If their argument starts with an equal sign (`='),
meillo@95 1179 then the rest of the argument is taken as a format string,
meillo@95 1180 otherwise the arguments is treated as the name of a format file.
meillo@95 1181 Thus, now the following two lines equal:
meillo@95 1182 .VS
meillo@95 1183 scan -form scan.mailx
meillo@95 1184 scan -form "=`cat .../scan.mailx`"
meillo@95 1185 VE
meillo@95 1186 This rework removed the prefix collision between
meillo@95 1187 .Sw -form
meillo@95 1188 and
meillo@95 1189 .Sw -format .
meillo@95 1190 Now, typing
meillo@95 1191 .Sw -fo
meillo@95 1192 suffices to specify form or format string.
meillo@95 1193 .P
meillo@95 1194 The different meaning of
meillo@95 1195 .Sw -format
meillo@95 1196 for
meillo@95 1197 .Pn repl
meillo@95 1198 and
meillo@95 1199 .Pn forw
meillo@95 1200 was removed in mmh.
meillo@95 1201 .Pn forw
meillo@95 1202 was completely switched to MIME-type forwarding, thus removing the
meillo@95 1203 .Sw -[no]format .
meillo@97 1204 .Ci 6e271608b7b9c23771523f88d23a4d3593010cf1
meillo@95 1205 For
meillo@95 1206 .Pn repl ,
meillo@95 1207 the
meillo@95 1208 .Sw -[no]format
meillo@95 1209 switches were reworked to
meillo@95 1210 .Sw -[no]filter
meillo@95 1211 switches.
meillo@97 1212 .Ci 67411b1f95d6ec987b4c732459e1ba8a8ac192c6
meillo@95 1213 The
meillo@95 1214 .Sw -format
meillo@95 1215 switches of
meillo@95 1216 .Pn send
meillo@95 1217 and
meillo@95 1218 .Pn post ,
meillo@95 1219 which had a third meaning,
meillo@95 1220 were removed likewise.
meillo@97 1221 .Ci f3cb7cde0e6f10451b6848678d95860d512224b9
meillo@95 1222 Eventually, the ambiguity of the
meillo@95 1223 .Sw -format
meillo@95 1224 switches was resolved by not anymore having any such switch in mmh.
meillo@95 1225
meillo@95 1226
meillo@95 1227 .U3 "MIME Tools
meillo@95 1228 .P
meillo@95 1229 The MIME tools, which were once part of
meillo@95 1230 .Pn mhn ,
meillo@95 1231 had several switches that added little practical value to the programs.
meillo@95 1232 The
meillo@95 1233 .Sw -[no]realsize
meillo@95 1234 switches of
meillo@95 1235 .Pn mhbuild
meillo@95 1236 and
meillo@95 1237 .Pn mhlist
meillo@97 1238 were removed, doing real size calculations always now
meillo@97 1239 .Ci 8d8f1c3abc586c005c904e52c4adbfe694d2201c ,
meillo@97 1240 as
meillo@95 1241 ``This provides an accurate count at the expense of a small delay.''
meillo@95 1242 This small delay is not noticable on modern systems.
meillo@95 1243 .P
meillo@95 1244 The
meillo@95 1245 .Sw -[no]check
meillo@95 1246 switches were removed together with the support for
meillo@95 1247 .Hd Content-MD5
meillo@95 1248 header fields.
meillo@95 1249 .[
meillo@95 1250 rfc 1864
meillo@95 1251 .]
meillo@97 1252 .Ci 31dc797eb5178970d68962ca8939da3fd9a8efda
meillo@95 1253 (See Sec. XXX)
meillo@95 1254 .P
meillo@95 1255 The
meillo@95 1256 .Sw -[no]ebcdicsafe
meillo@95 1257 and
meillo@95 1258 .Sw -[no]rfc934mode
meillo@95 1259 switches of
meillo@95 1260 .Pn mhbuild
meillo@95 1261 were removed because they are considered obsolete.
meillo@97 1262 .Ci 01a3480928da485b4d6109d36d751dfa71799d58
meillo@97 1263 .Ci 3363e2624dce0eb8164cf8b3f1ab385c8ff72e88
meillo@95 1264 .P
meillo@95 1265 Content caching of external MIME parts, activated with the
meillo@95 1266 .Sw -rcache
meillo@95 1267 and
meillo@95 1268 .Sw -wcache
meillo@95 1269 switches was completely removed.
meillo@97 1270 .Ci d1fefd9f614e4dc3cda16da6c69133c1b2005269
meillo@97 1271 External MIME parts are rare today, having a caching facility
meillo@96 1272 for them is appears to be unnecessary.
meillo@95 1273 .P
meillo@95 1274 In pre-MIME times,
meillo@95 1275 .Pn mhl
meillo@95 1276 had covered many tasks that are part of MIME handling today.
meillo@95 1277 Therefore,
meillo@95 1278 .Pn mhl
meillo@95 1279 could be simplified to a large extend, reducing the number of its
meillo@95 1280 switches from 21 to 6.
meillo@97 1281 .Ci 350ad6d3542a07639213cf2a4fe524e829c1e7b6
meillo@97 1282 .Ci 0e46503be3c855bddaeae3843e1b659279c35d70
meillo@95 1283
meillo@95 1284
meillo@95 1285 .U3 "Mail Transfer Switches
meillo@95 1286 .P
meillo@95 1287 With the removal of the mail transfer facilities, a lot of switches
meillo@95 1288 vanished automatically.
meillo@95 1289 .Pn inc
meillo@95 1290 lost 9 switches, namely
meillo@95 1291 .Sw -host ,
meillo@95 1292 .Sw -port ,
meillo@95 1293 .Sw -user ,
meillo@95 1294 .Sw -proxy ,
meillo@95 1295 .Sw -snoop ,
meillo@95 1296 .Sw -[no]pack ,
meillo@95 1297 as well as
meillo@95 1298 .Sw -sasl
meillo@95 1299 and
meillo@95 1300 .Sw -saslmech .
meillo@95 1301 .Pn send
meillo@95 1302 and
meillo@95 1303 .Pn post
meillo@95 1304 lost 11 switches each, namely
meillo@95 1305 .Sw -server ,
meillo@95 1306 .Sw -port ,
meillo@95 1307 .Sw -client ,
meillo@95 1308 .Sw -user ,
meillo@95 1309 .Sw -mail ,
meillo@95 1310 .Sw -saml ,
meillo@95 1311 .Sw -send ,
meillo@95 1312 .Sw -soml ,
meillo@95 1313 .Sw -snoop ,
meillo@95 1314 as well as
meillo@95 1315 .Sw -sasl ,
meillo@95 1316 .Sw -saslmech ,
meillo@95 1317 and
meillo@95 1318 .Sw -tls .
meillo@95 1319 .Pn send
meillo@95 1320 had the switches only to pass them further to
meillo@95 1321 .Pn post ,
meillo@95 1322 because the user would invoke
meillo@95 1323 .Pn post
meillo@95 1324 not directly, but through
meillo@95 1325 .Pn send .
meillo@95 1326 All these switches, except
meillo@95 1327 .Sw -snoop
meillo@95 1328 were usually defined as default switches in the user's profile,
meillo@95 1329 but hardly given in interactive usage.
meillo@95 1330 .P
meillo@95 1331 Of course, those switches did not really ``vanish'', but the configuration
meillo@95 1332 they did was handed over to external MSAs and MRAs.
meillo@95 1333 Instead of setting up the mail transfer in mmh, it is set up in
meillo@95 1334 external tools.
meillo@95 1335 Yet, this simplifies mmh.
meillo@95 1336 Specialized external tools will likely have simple configuration files.
meillo@95 1337 Hence, instead of having one complicated central configuration file,
meillo@95 1338 the configuration of each domain is separate.
meillo@95 1339 Although the user needs to learn to configure each of the tools,
meillo@95 1340 each configuration is likely much simpler.
meillo@95 1341
meillo@95 1342
meillo@95 1343 .U3 "Maildrop Formats
meillo@95 1344 .P
meillo@95 1345 With the removal of MMDF maildrop format support,
meillo@95 1346 .Pn packf
meillo@95 1347 and
meillo@95 1348 .Pn rcvpack
meillo@95 1349 no longer needed their
meillo@95 1350 .Sw -mbox
meillo@95 1351 and
meillo@95 1352 .Sw -mmdf
meillo@95 1353 switches.
meillo@95 1354 .Sw -mbox
meillo@95 1355 is the sole behavior now.
meillo@97 1356 .Ci 3916ab66ad5d183705ac12357621ea8661afd3c0
meillo@95 1357 In the same go,
meillo@95 1358 .Pn packf
meillo@97 1359 and
meillo@97 1360 .Pn rcvpack
meillo@97 1361 were reworked (see Sec. XXX) and their
meillo@95 1362 .Sw -file
meillo@95 1363 switch became unnecessary.
meillo@97 1364 .Ci ca1023716d4c2ab890696f3e41fa0d94267a940e
meillo@95 1365
meillo@95 1366
meillo@95 1367 .U3 "Terminal Magic
meillo@95 1368 .P
meillo@95 1369 Mmh's tools will no longer clear the screen (\c
meillo@95 1370 .Pn scan 's
meillo@95 1371 and
meillo@95 1372 .Pn mhl 's
meillo@95 1373 .Sw -[no]clear
meillo@97 1374 switches
meillo@97 1375 .Ci e57b17343dcb3ff373ef4dd089fbe778f0c7c270
meillo@97 1376 .Ci 943765e7ac5693ae177fd8d2b5a2440e53ce816e ).
meillo@95 1377 Neither will
meillo@95 1378 .Pn mhl
meillo@95 1379 ring the bell (\c
meillo@97 1380 .Sw -[no]bell
meillo@97 1381 .Ci e11983f44e59d8de236affa5b0d0d3067c192e24 )
meillo@95 1382 nor page the output itself (\c
meillo@97 1383 .Sw -length
meillo@97 1384 .Ci 5b9d883db0318ed2b84bb82dee880d7381f99188 ).
meillo@95 1385 .P
meillo@95 1386 Generally, the pager to use is no longer specified with the
meillo@95 1387 .Sw -[no]moreproc
meillo@95 1388 command line switches for
meillo@95 1389 .Pn mhl
meillo@95 1390 and
meillo@95 1391 .Pn show /\c
meillo@95 1392 .Pn mhshow .
meillo@97 1393 .Ci 39e87a75b5c2d3572ec72e717720b44af291e88a
meillo@95 1394 .P
meillo@95 1395 .Pn prompter
meillo@95 1396 lost its
meillo@95 1397 .Sw -erase
meillo@95 1398 and
meillo@95 1399 .Sw -kill
meillo@95 1400 switches because today the terminal cares for the line editing keys.
meillo@95 1401
meillo@95 1402
meillo@95 1403 .U3 "Header Printing
meillo@95 1404 .P
meillo@95 1405 .Pn folder 's
meillo@95 1406 data output is self-explaining enough that
meillo@95 1407 displaying the header line makes few sense.
meillo@95 1408 Hence, the
meillo@95 1409 .Sw -[no]header
meillo@95 1410 switch was removed and headers are never printed.
meillo@97 1411 .Ci 601cc73d1fa05ce96faa728f036d6c51b91701c7
meillo@95 1412 .P
meillo@95 1413 In
meillo@95 1414 .Pn mhlist ,
meillo@95 1415 the
meillo@95 1416 .Sw -[no]header
meillo@95 1417 switches were removed, too.
meillo@97 1418 .Ci b24f96523aaf60e44e04a3ffb1d22e69a13a602f
meillo@95 1419 But in this case headers are always printed,
meillo@95 1420 because the output is not self-explaining.
meillo@95 1421 .P
meillo@95 1422 .Pn scan
meillo@95 1423 also had
meillo@95 1424 .Sw -[no]header
meillo@95 1425 switches.
meillo@95 1426 Printing the header had been sensible until the introduction of
meillo@95 1427 format strings made it impossible to display the column headings.
meillo@95 1428 Only the folder name and the current date remained to be printed.
meillo@95 1429 As this information can be perfectly retrieved by
meillo@95 1430 .Pn folder
meillo@95 1431 and
meillo@95 1432 .Pn date ,
meillo@95 1433 consequently, the switches were removed.
meillo@97 1434 .Ci c477dc5d1d03fa6d9a8ab3dd3508c63cbddc044e
meillo@95 1435 .P
meillo@95 1436 By removing all
meillo@95 1437 .Sw -header
meillo@95 1438 switches, the collision with
meillo@95 1439 .Sw -help
meillo@95 1440 on the first two letters was resolved.
meillo@95 1441 Currently,
meillo@95 1442 .Sw -h
meillo@95 1443 evaluates to
meillo@95 1444 .Sw -help
meillo@95 1445 for all tools of mmh.
meillo@95 1446
meillo@95 1447
meillo@95 1448 .U3 "Suppressing Edits or the WhatNow Shell
meillo@95 1449 .P
meillo@95 1450 The
meillo@95 1451 .Sw -noedit
meillo@95 1452 switches of
meillo@95 1453 .Pn comp ,
meillo@95 1454 .Pn repl ,
meillo@95 1455 .Pn forw ,
meillo@95 1456 .Pn dist ,
meillo@95 1457 and
meillo@95 1458 .Pn whatnow
meillo@95 1459 was removed, but it can now be replaced by specifying
meillo@95 1460 .Sw -editor
meillo@95 1461 with an empty argument.
meillo@97 1462 .Ci 75fca31a5b9d5c1a99c74ab14c94438d8852fba9
meillo@95 1463 (Specifying
meillo@95 1464 .Cl "-editor true
meillo@95 1465 is nearly the same, only differing by the previous editor being set.)
meillo@95 1466 .P
meillo@95 1467 The more important change is the removal of the
meillo@95 1468 .Sw -nowhatnowproc
meillo@95 1469 switch.
meillo@97 1470 .Ci ee4f43cf2ef0084ec698e4e87159a94c01940622
meillo@95 1471 This switch had introduced an awkward behavior, as explained in nmh's
meillo@95 1472 man page for
meillo@95 1473 .Mp comp (1):
meillo@95 1474 .QP
meillo@95 1475 The \-editor editor switch indicates the editor to use for
meillo@95 1476 the initial edit. Upon exiting from the editor, comp will
meillo@95 1477 invoke the whatnow program. See whatnow(1) for a discussion
meillo@95 1478 of available options. The invocation of this program can be
meillo@95 1479 inhibited by using the \-nowhatnowproc switch. (In truth of
meillo@95 1480 fact, it is the whatnow program which starts the initial
meillo@95 1481 edit. Hence, \-nowhatnowproc will prevent any edit from
meillo@95 1482 occurring.)
meillo@95 1483 .P
meillo@95 1484 Effectively, the
meillo@95 1485 .Sw -nowhatnowproc
meillo@95 1486 switch stored a copy of the form file into the draft folder.
meillo@95 1487 As
meillo@95 1488 .Cl "-whatnowproc true
meillo@95 1489 causes the same behavior, the
meillo@95 1490 .Sw -nowhatnowproc
meillo@95 1491 switch was removed for being redundant.
meillo@95 1492 Likely, however, the intention for specifying
meillo@95 1493 .Sw -nowhatnowproc
meillo@95 1494 is sending a fully prepared form file at once.
meillo@95 1495 This can be done with
meillo@95 1496 .Cl "-whatnowproc send" .
meillo@95 1497
meillo@95 1498
meillo@95 1499 .U3 "Compatibility Switches
meillo@95 1500 .BU
meillo@95 1501 The hidden
meillo@95 1502 .Sw -[no]total
meillo@95 1503 switches of
meillo@95 1504 .Pn flist .
meillo@95 1505 They were simply the inverse of the visible
meillo@95 1506 .Sw -[no]fast
meillo@95 1507 switches:
meillo@95 1508 .Sw -total
meillo@95 1509 was
meillo@95 1510 .Sw -nofast
meillo@95 1511 and
meillo@95 1512 .Sw -nototal
meillo@95 1513 was
meillo@95 1514 .Sw -fast .
meillo@95 1515 I removed the
meillo@95 1516 .Sw -[no]total
meillo@95 1517 legacy.
meillo@97 1518 .Ci ea21fe2c4bd23c639bef251398fae809875732ec
meillo@95 1519 .BU
meillo@95 1520 The
meillo@95 1521 .Sw -subject
meillo@95 1522 switch of
meillo@95 1523 .Pn sortm
meillo@95 1524 existed for compatibility only.
meillo@95 1525 It can be fully replaced by
meillo@95 1526 .Cl "-textfield subject
meillo@95 1527 thus it was removed.
meillo@97 1528 .Ci 00140a3c86e9def69d98ba2ffd4d6e50ef6326ea
meillo@95 1529
meillo@95 1530
meillo@95 1531 .U3 "Various
meillo@95 1532 .BU
meillo@96 1533 In order to avoid prefix collisions among switch names, the
meillo@95 1534 .Sw -version
meillo@95 1535 switch was renamed to
meillo@95 1536 .Sw -Version
meillo@95 1537 (with capital `V').
meillo@97 1538 .Ci 32b2354dbaf4bf934936eb5b102a4a3d2fdd209a
meillo@95 1539 Every program has the
meillo@95 1540 .Sw -version
meillo@95 1541 switch but its first three letters collided with the
meillo@95 1542 .Sw -verbose
meillo@95 1543 switch, present in many programs.
meillo@95 1544 The rename solved this problem once for all.
meillo@95 1545 Although this rename breaks a basic interface, having the
meillo@95 1546 .Sw -V
meillo@95 1547 abbreviation to display the version information, isn't all too bad.
meillo@95 1548 .BU
meillo@95 1549 .Sw -[no]preserve
meillo@95 1550 of
meillo@95 1551 .Pn refile
meillo@95 1552 was removed because what use was it anyway?
meillo@95 1553 .QP
meillo@95 1554 Normally when a message is refiled, for each destination
meillo@95 1555 folder it is assigned the number which is one above the current
meillo@95 1556 highest message number in that folder. Use of the
meillo@95 1557 \-preserv [sic!] switch will override this message renaming, and try
meillo@95 1558 to preserve the number of the message. If a conflict for a
meillo@95 1559 particular folder occurs when using the \-preserve switch,
meillo@95 1560 then refile will use the next available message number which
meillo@95 1561 is above the message number you wish to preserve.
meillo@95 1562 .BU
meillo@95 1563 The removal of the
meillo@95 1564 .Sw -[no]reverse
meillo@95 1565 switches of
meillo@95 1566 .Pn scan
meillo@97 1567 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
meillo@95 1568 is a bug fix, supported by the comments
meillo@95 1569 ``\-[no]reverse under #ifdef BERK (I really HATE this)''
meillo@95 1570 by Rose and
meillo@95 1571 ``Lists messages in reverse order with the `\-reverse' switch.
meillo@95 1572 This should be considered a bug.'' by Romine in the documentation.
meillo@97 1573 The question remains why neither Rose and Romine had fixed this
meillo@95 1574 bug in the Eighties when they wrote these comments nor has anyone
meillo@95 1575 thereafter.
meillo@93 1576
meillo@93 1577
meillo@93 1578 .ig
meillo@93 1579
meillo@95 1580 forw: [no]dashstuffing(mhl)
meillo@93 1581
meillo@95 1582 mhshow: [no]pause [no]serialonly
meillo@93 1583
meillo@93 1584 mhmail: resent queued
meillo@93 1585 inc: snoop, (pop)
meillo@93 1586
meillo@95 1587 mhl: [no]faceproc folder sleep
meillo@95 1588 [no]dashstuffing(forw) digest list volume number issue number
meillo@93 1589
meillo@95 1590 prompter: [no]doteof
meillo@93 1591
meillo@93 1592 refile: [no]preserve [no]unlink [no]rmmproc
meillo@93 1593
meillo@95 1594 send: [no]forward [no]mime [no]msgid
meillo@93 1595 [no]push split [no]unique (sasl) width snoop [no]dashstuffing
meillo@93 1596 attach attachformat
meillo@93 1597 whatnow: (noedit) attach
meillo@93 1598
meillo@93 1599 slocal: [no]suppressdups
meillo@93 1600
meillo@95 1601 spost: [no]filter [no]backup width [no]push idanno
meillo@93 1602 [no]check(whom) whom(whom)
meillo@93 1603
meillo@93 1604 whom: ???
meillo@93 1605
meillo@95 1606 ..
meillo@93 1607
meillo@93 1608
meillo@93 1609 .ig
meillo@93 1610
meillo@93 1611 .P
meillo@93 1612 To ease typing, the switches can be abbreviated as much as the remaining
meillo@93 1613 prefix remains unambiguous.
meillo@93 1614 If in our example no other switch would start with the letter `t', then
meillo@93 1615 .Cl "-truncate" ,
meillo@93 1616 .Cl "-trunc" ,
meillo@93 1617 .Cl "-tr" ,
meillo@93 1618 and
meillo@93 1619 .Cl "-t
meillo@93 1620 would all be the same.
meillo@93 1621 As a result, switches can neither be grouped (as in
meillo@93 1622 .Cl "ls -ltr" )
meillo@93 1623 nor can switch arguments be appended directly to the switch (as in
meillo@93 1624 .Cl "sendmail -q30m" ).
meillo@93 1625 .P
meillo@93 1626 Many switches have negating counter-parts, which start with `no'.
meillo@93 1627 For example
meillo@93 1628 .Cl "-notruncate
meillo@93 1629 inverts the
meillo@93 1630 .Cl "-truncate
meillo@93 1631 switch.
meillo@93 1632 They exist to undo the effect of default switches in the profile.
meillo@93 1633 If the user has chosen to change the default behavior of some tool
meillo@93 1634 by adding a default switch to the profile,
meillo@96 1635 he can still undo this change in behavior by specifying the inverse
meillo@93 1636 switch on the command line.
meillo@93 1637 .P
meillo@93 1638 In the best case, all switches are unambiguous on the first character,
meillo@93 1639 or on the three-letter prefix for the `no' variants.
meillo@96 1640 Reducing switch prefix collisions, shortens the necessary prefix length
meillo@93 1641 the user must type.
meillo@93 1642 Having less switches helps best.
meillo@93 1643
meillo@93 1644 ..
meillo@58 1645
meillo@95 1646
meillo@95 1647
meillo@95 1648
meillo@74 1649 .H1 "Modernizing
meillo@58 1650
meillo@58 1651
meillo@58 1652 .H2 "Removal of Code Relicts
meillo@0 1653 .P
meillo@51 1654 The code base of mmh originates from the late Seventies,
meillo@51 1655 had been extensively
meillo@51 1656 worked on in the mid Eighties, and had been partly reorganized and extended
meillo@51 1657 in the Nineties. Relicts of all those times had gathered in the code base.
meillo@12 1658 My goal was to remove any ancient code parts. One part of the task was
meillo@12 1659 converting obsolete code constructs to standard constructs, the other part
meillo@12 1660 was dropping obsolete functions.
meillo@12 1661 .P
meillo@12 1662 As I'm not even thirty years old and have no more than seven years of
meillo@51 1663 Unix experience, I needed to learn about the history in retrospective.
meillo@51 1664 Older people likely have used those ancient constructs themselves
meillo@51 1665 and have suffered from their incompatibilities and have longed for
meillo@12 1666 standardization. Unfortunately, I have only read that others had done so.
meillo@12 1667 This put me in a much more difficult positions when working on the old
meillo@12 1668 code. I needed to recherche what other would have known by heart from
meillo@12 1669 experience. All my programming experience comes from a time past ANSI C
meillo@12 1670 and past POSIX. Although I knew about the times before, I took the
meillo@51 1671 current state implicitly for granted most of the time.
meillo@12 1672 .P
meillo@12 1673 Being aware of
meillo@12 1674 these facts, I rather let people with more historic experience solve the
meillo@12 1675 task of converting the ancient code constructs to standardized ones.
meillo@12 1676 Luckily, Lyndon Nerenberg focused on this task at the nmh project.
meillo@12 1677 He converted large parts of the code to POSIX constructs, removing
meillo@12 1678 the conditionals compilation for now standardized features.
meillo@12 1679 I'm thankful for this task being solved. I only pulled the changes into
meillo@12 1680 mmh.
meillo@12 1681 .P
meillo@20 1682 The other task \(en dropping ancient functionality to remove old code \(en
meillo@12 1683 I did myself, though. My position to strip mmh to the bare minimum of
meillo@12 1684 frequently used features is much more revolutional than the nmh community
meillo@20 1685 likes it. Without the need to justify my decisions, I was able to quickly
meillo@20 1686 remove functionality I considered ancient.
meillo@20 1687 The need to discuss my decisions with
meillo@20 1688 peers likely would have slowed this process down. Of course, I researched
meillo@12 1689 if a particular feature really should be dropped. Having not had any
meillo@12 1690 contact to this feature within my computer life was a first indicator to
meillo@12 1691 drop it, but I also asked others and searched the literature for modern
meillo@12 1692 usage of the feature. If it appeared to be truly ancient, I dropped it.
meillo@12 1693 The reason for dropping is always part of the commit message in the
meillo@12 1694 version control system. Thus, it is easy for others to check their
meillo@12 1695 view on the topic with mine and possibly to argue for reinclusion.
meillo@12 1696
meillo@12 1697 .U2 "MMDF maildrop support
meillo@12 1698 .P
meillo@12 1699 I did drop any support for the MMDF maildrop format. This type of format
meillo@12 1700 is conceptionally similar to the mbox format, but uses four bytes with
meillo@12 1701 value 1 (\fL^A^A^A^A\fP) as message delimiter,
meillo@18 1702 instead of the string ``\fLFrom\ \fP''.
meillo@12 1703 Due to the similarity and mbox being the de-facto standard maildrop
meillo@12 1704 format on Unix, but also due to the larger influence of Sendmail than MMDF,
meillo@12 1705 the MMDF maildrop format had vanished.
meillo@12 1706 .P
meillo@12 1707 The simplifications within the code were only moderate. Switches could
meillo@12 1708 be removed from tools like
meillo@12 1709 .L packf ,
meillo@12 1710 which generate packed mailboxes. Only one packed mailbox format remained:
meillo@12 1711 mbox.
meillo@12 1712 The most important changes affect the equally named mail parsing routine in
meillo@12 1713 .L sbr/m_getfld.c .
meillo@12 1714 The direct MMDF code had been removed, but as now only one packed mailbox
meillo@12 1715 format is left, code structure simplifications are likely possible.
meillo@12 1716 The reason why they are still outstanding is the heavily optimized code
meillo@18 1717 of
meillo@18 1718 .Fu m_getfld() .
meillo@18 1719 Changes beyond a small local scope \(en
meillo@12 1720 which restructuring in its core is \(en cause a high risk of damaging
meillo@12 1721 the intricate workings of the optimized code. This problem is know
meillo@12 1722 to the developers of nmh, too. They also avoid touching this minefield
meillo@12 1723 if possible.
meillo@12 1724
meillo@12 1725 .U2 "UUCP Bang Paths
meillo@12 1726 .P
meillo@12 1727 More questionably than the former topic is the removal of support for the
meillo@12 1728 UUCP bang path address style. However, the user may translate the bang
meillo@12 1729 paths on retrieval to Internet addresses and the other way on posting
meillo@12 1730 messages. The former can be done my an MDA like procmail; the latter
meillo@12 1731 by a sendmail wrapper. This would ensure that any address handling would
meillo@12 1732 work as expected. However, it might just work well without any
meillo@12 1733 such modifications, as mmh does not touch addresses much, in general.
meillo@12 1734 But I can't ensure as I have never used an environment with bang paths.
meillo@12 1735 Also, the behavior might break at any point in further development.
meillo@12 1736
meillo@12 1737 .U2 "Hardcopy terminal support
meillo@12 1738 .P
meillo@12 1739 More of a funny anecdote is the remaining of a check for printing to a
meillo@12 1740 hardcopy terminal until Spring 2012, when I finally removed it.
meillo@12 1741 I surely would be very happy to see such a terminal in action, maybe
meillo@12 1742 actually being able to work on it, but I fear my chances are null.
meillo@12 1743 .P
meillo@12 1744 The check only prevented a pager to be placed between the outputting
meillo@18 1745 program (\c
meillo@18 1746 .Pn mhl )
meillo@18 1747 and the terminal. This could have been ensured with
meillo@18 1748 the
meillo@82 1749 .Sw -nomoreproc
meillo@18 1750 at the command line statically, too.
meillo@12 1751
meillo@12 1752 .U2 "Removed support for header fields
meillo@12 1753 .P
meillo@84 1754 The
meillo@84 1755 .Hd Encrypted
meillo@84 1756 header field had been introduced by RFC\^822, but already
meillo@12 1757 marked legacy in RFC 2822. It was superseded by FIXME.
meillo@84 1758 Mmh does no more support this header field.
meillo@12 1759 .P
meillo@84 1760 Native support for
meillo@84 1761 .Hd Face
meillo@84 1762 header fields had been removed, as well.
meillo@84 1763 The feature is similar to the
meillo@84 1764 .Hd X-Face
meillo@84 1765 header field in its intent,
meillo@21 1766 but takes a different approach to store the image.
meillo@84 1767 Instead of encoding the image data directly into the header field,
meillo@84 1768 the it contains the hostname and UDP port where the image
meillo@21 1769 date could be retrieved.
meillo@84 1770 Neither
meillo@84 1771 .Hd X-Face
meillo@84 1772 nor the here described
meillo@84 1773 .Hd Face
meillo@84 1774 system
meillo@21 1775 \**
meillo@21 1776 .FS
meillo@21 1777 There is also a newer but different system, invented 2005,
meillo@84 1778 using
meillo@84 1779 .Hd Face
meillo@84 1780 headers.
meillo@84 1781 It is the successor of
meillo@84 1782 .Hd X-Face
meillo@84 1783 providing colored PNG images.
meillo@21 1784 .FE
meillo@21 1785 became well used in the large scale.
meillo@21 1786 It's still possible to use a Face systems,
meillo@21 1787 although mmh does not provide support for any of the different systems
meillo@21 1788 anymore. It's fairly easy to write a small shell script to
meillo@21 1789 extract the embedded or fetch the external Face data and display the image.
meillo@84 1790 Own
meillo@84 1791 .Hd Face
meillo@84 1792 header field can be added into the draft template files.
meillo@21 1793 .P
meillo@84 1794 .Hd Content-MD5
meillo@84 1795 header fields were introduced by RFC\^1864. They provide only
meillo@12 1796 a verification of data corruption during the transfer. By no means can
meillo@12 1797 they ensure verbatim end-to-end delivery of the contents. This is clearly
meillo@12 1798 stated in the RFC. The proper approach to provide verificationability
meillo@12 1799 of content in an end-to-end relationship is the use of digital cryptography
meillo@12 1800 (RFCs FIXME). On the other hand, transfer protocols should ensure the
meillo@12 1801 integrity of the transmission. In combinations these two approaches
meillo@84 1802 make the
meillo@84 1803 .Hd Content-MD5
meillo@84 1804 header field useless. In consequence, I removed
meillo@12 1805 the support for it. By this removal, MD5 computation is not needed
meillo@12 1806 anywhere in mmh. Hence, over 500 lines of code were removed by this one
meillo@84 1807 change. Even if the
meillo@84 1808 .Hd Content-MD5
meillo@84 1809 header field is useful sometimes,
meillo@89 1810 I value its usefulness less than the improvement in maintainability, caused
meillo@12 1811 by the removal.
meillo@12 1812
meillo@20 1813 .U2 "Prompter's Control Keys
meillo@20 1814 .P
meillo@20 1815 The program
meillo@20 1816 .Pn prompter
meillo@20 1817 queries the user to fill in a message form. When used by
meillo@20 1818 .Pn comp
meillo@20 1819 as:
meillo@82 1820 .VS
meillo@82 1821 comp -editor prompter
meillo@82 1822 VE
meillo@20 1823 the resulting behavior is similar to
meillo@20 1824 .Pn mailx .
meillo@51 1825 Apparently,
meillo@20 1826 .Pn prompter
meillo@20 1827 hadn't been touched lately. Otherwise it's hardly explainable why it
meillo@20 1828 still offered the switches
meillo@84 1829 .Sw -erase
meillo@84 1830 .Ar chr
meillo@20 1831 and
meillo@84 1832 .Sw -kill
meillo@84 1833 .Ar chr
meillo@20 1834 to name the characters for command line editing.
meillo@21 1835 The times when this had been necessary are long time gone.
meillo@20 1836 Today these things work out-of-the-box, and if not, are configured
meillo@20 1837 with the standard tool
meillo@20 1838 .Pn stty .
meillo@20 1839
meillo@21 1840 .U2 "Vfork and Retry Loops
meillo@21 1841 .P
meillo@51 1842 MH creates many processes, which is a consequence of the tool chest approach.
meillo@21 1843 In earlier times
meillo@21 1844 .Fu fork()
meillo@21 1845 had been an expensive system call, as the process's whole image needed
meillo@21 1846 to be duplicated. One common case is replacing the image with
meillo@21 1847 .Fu exec()
meillo@21 1848 right after having forked the child process.
meillo@21 1849 To speed up this case, the
meillo@21 1850 .Fu vfork()
meillo@21 1851 system call was invented at Berkeley. It completely omits copying the
meillo@21 1852 image. If the image gets replaced right afterwards then unnecessary
meillo@21 1853 work is omited. On old systems this results in large speed ups.
meillo@21 1854 MH uses
meillo@21 1855 .Fu vfork()
meillo@21 1856 whenever possible.
meillo@21 1857 .P
meillo@21 1858 Memory management units that support copy-on-write semantics make
meillo@21 1859 .Fu fork()
meillo@21 1860 almost as fast as
meillo@21 1861 .Fu vfork()
meillo@21 1862 in the cases when they can be exchanged.
meillo@21 1863 With
meillo@21 1864 .Fu vfork()
meillo@51 1865 being more error-prone and hardly faster, it's preferable to simply
meillo@21 1866 use
meillo@21 1867 .Fu fork()
meillo@21 1868 instead.
meillo@21 1869 .P
meillo@21 1870 Related to the costs of
meillo@21 1871 .Fu fork()
meillo@21 1872 is the probability of its success.
meillo@21 1873 Today on modern systems, the system call will succeed almost always.
meillo@51 1874 In the Eighties on heavy loaded systems, as they were common at
meillo@21 1875 universities, this had been different. Thus, many of the
meillo@21 1876 .Fu fork()
meillo@21 1877 calls were wrapped into loops to retry to fork several times in
meillo@21 1878 short intervals, in case of previous failure.
meillo@21 1879 In mmh, the program aborts at once if the fork failed.
meillo@21 1880 The user can reexecute the command then. This is expected to be a
meillo@21 1881 very rare case on modern systems, especially personal ones, which are
meillo@21 1882 common today.
meillo@21 1883
meillo@12 1884
meillo@58 1885 .H2 "Attachments
meillo@22 1886 .P
meillo@58 1887 MIME
meillo@58 1888
meillo@58 1889
meillo@58 1890 .H2 "Digital Cryptography
meillo@22 1891 .P
meillo@58 1892 Signing and encryption.
meillo@58 1893
meillo@58 1894
meillo@58 1895 .H2 "Good Defaults
meillo@22 1896 .P
meillo@58 1897 foo
meillo@58 1898
meillo@58 1899
meillo@58 1900
meillo@58 1901
meillo@58 1902 .H1 "Code style
meillo@22 1903 .P
meillo@58 1904 foo
meillo@58 1905
meillo@58 1906
meillo@58 1907 .H2 "Standard Code
meillo@22 1908 .P
meillo@58 1909 POSIX
meillo@22 1910
meillo@22 1911
meillo@58 1912 .H2 "Separation
meillo@14 1913
meillo@58 1914 .U2 "MH Directory Split
meillo@0 1915 .P
meillo@19 1916 In MH and nmh, a personal setup had consisted of two parts:
meillo@19 1917 The MH profile, named
meillo@19 1918 .Fn \&.mh_profile
meillo@19 1919 and being located directly in the user's home directory.
meillo@19 1920 And the MH directory, where all his mail messages and also his personal
meillo@19 1921 forms, scan formats, other configuration files are stored. The location
meillo@19 1922 of this directory could be user-chosen. The default was to name it
meillo@19 1923 .Fn Mail
meillo@19 1924 and have it directly in the home directory.
meillo@19 1925 .P
meillo@19 1926 I've never liked the data storage and the configuration to be intermixed.
meillo@19 1927 They are different kinds of data. One part, are the messages,
meillo@19 1928 which are the data to operate on. The other part, are the personal
meillo@19 1929 configuration files, which are able to change the behavior of the operations.
meillo@19 1930 The actual operations are defined in the profile, however.
meillo@19 1931 .P
meillo@19 1932 When storing data, one should try to group data by its type.
meillo@19 1933 There's sense in the Unix file system hierarchy, where configuration
meillo@19 1934 file are stored separate (\c
meillo@19 1935 .Fn /etc )
meillo@19 1936 to the programs (\c
meillo@19 1937 .Fn /bin
meillo@19 1938 and
meillo@19 1939 .Fn /usr/bin )
meillo@19 1940 to their sources (\c
meillo@19 1941 .Fn /usr/src ).
meillo@19 1942 Such separation eases the backup management, for instance.
meillo@19 1943 .P
meillo@19 1944 In mmh, I've reorganized the file locations.
meillo@19 1945 Still there are two places:
meillo@19 1946 There's the mail storage directory, which, like in MH, contains all the
meillo@19 1947 messages, but, unlike in MH, nothing else.
meillo@19 1948 Its location still is user-chosen, with the default name
meillo@19 1949 .Fn Mail ,
meillo@19 1950 in the user's home directory. This is much similar to the case in nmh.
meillo@19 1951 The configuration files, however, are grouped together in the new directory
meillo@19 1952 .Fn \&.mmh
meillo@19 1953 in the user's home directory.
meillo@19 1954 The user's profile now is a file, named
meillo@19 1955 .Fn profile ,
meillo@19 1956 in this mmh directory.
meillo@19 1957 Consistently, the context file and all the personal forms, scan formats,
meillo@19 1958 and the like, are also there.
meillo@19 1959 .P
meillo@19 1960 The naming changed with the relocation.
meillo@19 1961 The directory where everything, except the profile, had been stored (\c
meillo@19 1962 .Fn $HOME/Mail ),
meillo@19 1963 used to be called \fIMH directory\fP. Now, this directory is called the
meillo@19 1964 user's \fImail storage\fP. The name \fImmh directory\fP is now given to
meillo@19 1965 the new directory
meillo@19 1966 (\c
meillo@19 1967 .Fn $HOME/.mmh ),
meillo@19 1968 containing all the personal configuration files.
meillo@19 1969 .P
meillo@19 1970 The separation of the files by type of content is logical and convenient.
meillo@19 1971 There are no functional differences as any possible setup known to me
meillo@19 1972 can be implemented with both approaches, although likely a bit easier
meillo@19 1973 with the new approach. The main goal of the change had been to provide
meillo@19 1974 sensible storage locations for any type of personal mmh file.
meillo@19 1975 .P
meillo@19 1976 In order for one user to have multiple MH setups, he can use the
meillo@19 1977 environment variable
meillo@19 1978 .Ev MH
meillo@19 1979 the point to a different profile file.
meillo@19 1980 The MH directory (mail storage plus personal configuration files) is
meillo@19 1981 defined by the
meillo@19 1982 .Pe Path
meillo@19 1983 profile entry.
meillo@19 1984 The context file could be defined by the
meillo@19 1985 .Pe context
meillo@19 1986 profile entry or by the
meillo@19 1987 .Ev MHCONTEXT
meillo@19 1988 environment variable.
meillo@19 1989 The latter is useful to have a distinct context (e.g. current folders)
meillo@19 1990 in each terminal window, for instance.
meillo@19 1991 In mmh, there are three environment variables now.
meillo@19 1992 .Ev MMH
meillo@19 1993 may be used to change the location of the mmh directory.
meillo@19 1994 .Ev MMHP
meillo@19 1995 and
meillo@19 1996 .Ev MMHC
meillo@19 1997 change the profile and context files, respectively.
meillo@19 1998 Besides providing a more consistent feel (which simply is the result
meillo@19 1999 of being designed anew), the set of personal configuration files can
meillo@19 2000 be chosen independently from the profile (including mail storage location)
meillo@19 2001 and context, now. Being it relevant for practical use or not, it
meillo@19 2002 de-facto is an improvement. However, the main achievement is the
meillo@19 2003 split between mail storage and personal configuration files.
meillo@17 2004
meillo@0 2005
meillo@58 2006 .H2 "Modularization
meillo@0 2007 .P
meillo@58 2008 whatnowproc
meillo@0 2009 .P
meillo@49 2010 The \fIMH library\fP
meillo@49 2011 .Fn libmh.a
meillo@49 2012 collects a bunch of standard functions that many of the MH tools need,
meillo@49 2013 like reading the profile or context files.
meillo@49 2014 This doesn't hurt the separation.
meillo@49 2015
meillo@58 2016
meillo@58 2017 .H2 "Style
meillo@58 2018 .P
meillo@58 2019 Code layout, goto, ...
meillo@58 2020
meillo@58 2021
meillo@58 2022
meillo@58 2023
meillo@89 2024 .H1 "Concept Exploitation/Homogeneity
meillo@58 2025
meillo@58 2026
meillo@58 2027 .H2 "Draft Folder
meillo@58 2028 .P
meillo@58 2029 Historically, MH provided exactly one draft message, named
meillo@58 2030 .Fn draft
meillo@58 2031 and
meillo@58 2032 being located in the MH directory. When starting to compose another message
meillo@58 2033 before the former one was sent, the user had been questioned whether to use,
meillo@58 2034 refile or replace the old draft. Working on multiple drafts at the same time
meillo@58 2035 was impossible. One could only work on them in alteration by refiling the
meillo@58 2036 previous one to some directory and fetching some other one for reediting.
meillo@58 2037 This manual draft management needed to be done each time the user wanted
meillo@58 2038 to switch between editing one draft to editing another.
meillo@58 2039 .P
meillo@58 2040 To allow true parallel editing of drafts, in a straight forward way, the
meillo@58 2041 draft folder facility exists. It had been introduced already in July 1984
meillo@58 2042 by Marshall T. Rose. The facility was deactivated by default.
meillo@58 2043 Even in nmh, the draft folder facility remained deactivated by default.
meillo@58 2044 At least, Richard Coleman added the man page
meillo@58 2045 .Mp mh-draft(5)
meillo@58 2046 to document
meillo@58 2047 the feature well.
meillo@58 2048 .P
meillo@58 2049 The only advantage of not using the draft folder facility is the static
meillo@89 2050 name of the draft file. This could be an issue for MH front-ends like mh-e.
meillo@58 2051 But as they likely want to provide working on multiple drafts in parallel,
meillo@58 2052 the issue is only concerning compatibility. The aim of nmh to stay compatible
meillo@58 2053 prevented the default activation of the draft folder facility.
meillo@58 2054 .P
meillo@58 2055 On the other hand, a draft folder is the much more natural concept than
meillo@58 2056 a draft message. MH's mail storage consists of folders and messages,
meillo@58 2057 the messages named with ascending numbers. A draft message breaks with this
meillo@58 2058 concept by introducing a message in a file named
meillo@58 2059 .Fn draft .
meillo@58 2060 This draft
meillo@58 2061 message is special. It can not be simply listed with the available tools,
meillo@58 2062 but instead requires special switches. I.e. corner-cases were
meillo@58 2063 introduced. A draft folder, in contrast, does not introduce such
meillo@58 2064 corner-cases. The available tools can operate on the messages within that
meillo@58 2065 folder like on any messages within any mail folders. The only difference
meillo@58 2066 is the fact that the default folder for
meillo@58 2067 .Pn send
meillo@58 2068 is the draft folder,
meillo@58 2069 instead of the current folder, like for all other tools.
meillo@58 2070 .P
meillo@58 2071 The trivial part of the change was activating the draft folder facility
meillo@58 2072 by default and setting a default name for this folder. Obviously, I chose
meillo@58 2073 the name
meillo@58 2074 .Fn +drafts .
meillo@58 2075 This made the
meillo@82 2076 .Sw -draftfolder
meillo@58 2077 and
meillo@82 2078 .Sw -draftmessage
meillo@58 2079 switches useless, and I could remove them.
meillo@58 2080 The more difficult but also the part that showed the real improvement,
meillo@58 2081 was updating the tools to the new concept.
meillo@82 2082 .Sw -draft
meillo@58 2083 switches could
meillo@58 2084 be dropped, as operating on a draft message became indistinguishable to
meillo@58 2085 operating on any other message for the tools.
meillo@58 2086 .Pn comp
meillo@58 2087 still has its
meillo@82 2088 .Sw -use
meillo@58 2089 switch for switching between its two modes: (1) Compose a new
meillo@58 2090 draft, possibly by taking some existing message as a form. (2) Modify
meillo@58 2091 an existing draft. In either case, the behavior of
meillo@58 2092 .Pn comp is
meillo@58 2093 deterministic. There is no more need to query the user. I consider this
meillo@58 2094 a major improvement. By making
meillo@58 2095 .Pn send
meillo@58 2096 simply operate on the current
meillo@58 2097 message in the draft folder by default, with message and folder both
meillo@58 2098 overridable by specifying them on the command line, it is now possible
meillo@58 2099 to send a draft anywhere within the storage by simply specifying its folder
meillo@58 2100 and name.
meillo@58 2101 .P
meillo@58 2102 All theses changes converted special cases to regular cases, thus
meillo@58 2103 simplifying the tools and increasing the flexibility.
meillo@58 2104
meillo@58 2105
meillo@58 2106 .H2 "Trash Folder
meillo@58 2107 .P
meillo@58 2108 Similar to the situation for drafts is the situation for removed messages.
meillo@58 2109 Historically, a message was deleted by renaming. A specific
meillo@58 2110 \fIbackup prefix\fP, often comma (\c
meillo@58 2111 .Fn , )
meillo@58 2112 or hash (\c
meillo@58 2113 .Fn # ),
meillo@58 2114 being prepended to the file name. Thus, MH wouldn't recognize the file
meillo@58 2115 as a message anymore, as only files whose name consists of digits only
meillo@58 2116 are treated as messages. The removed messages remained as files in the
meillo@58 2117 same directory and needed some maintenance job to truly delete them after
meillo@58 2118 some grace time. Usually, by running a command similar to
meillo@82 2119 .VS
meillo@82 2120 find /home/user/Mail -ctime +7 -name ',*' | xargs rm
meillo@82 2121 VE
meillo@58 2122 in a cron job. Within the grace time interval
meillo@58 2123 the original message could be restored by stripping the
meillo@58 2124 the backup prefix from the file name. If however, the last message of
meillo@58 2125 a folder is been removed \(en say message
meillo@58 2126 .Fn 6
meillo@58 2127 becomes file
meillo@58 2128 .Fn ,6
meillo@58 2129 \(en and a new message enters the same folder, thus the same
meillo@58 2130 numbered being given again \(en in our case
meillo@58 2131 .Fn 6
meillo@58 2132 \(en, if that one
meillo@58 2133 is removed too, then the backup of the former message gets overwritten.
meillo@58 2134 Thus, the ability to restore removed messages does not only depend on
meillo@58 2135 the ``sweeping cron job'' but also on the removing of further messages.
meillo@58 2136 This is undesirable, because the real mechanism is hidden from the user
meillo@58 2137 and the consequences of further removals are not always obvious.
meillo@58 2138 Further more, the backup files are scattered within the whole mail
meillo@58 2139 storage, instead of being collected at one place.
meillo@58 2140 .P
meillo@58 2141 To improve the situation, the profile entry
meillo@58 2142 .Pe rmmproc
meillo@58 2143 (previously named
meillo@58 2144 .Pe Delete-Prog )
meillo@58 2145 was introduced, very early.
meillo@58 2146 It could be set to any command, which would care for the mail removal
meillo@58 2147 instead of taking the default action, described above.
meillo@58 2148 Refiling the to-be-removed files to some garbage folder was a common
meillo@58 2149 example. Nmh's man page
meillo@58 2150 .Mp rmm(1)
meillo@58 2151 proposes
meillo@58 2152 .Cl "refile +d
meillo@58 2153 to move messages to the garbage folder and
meillo@58 2154 .Cl "rm `mhpath +d all`
meillo@58 2155 the empty the garbage folder.
meillo@58 2156 Managing the message removal this way is a sane approach. It keeps
meillo@58 2157 the removed messages in one place, makes it easy to remove the backup
meillo@58 2158 files, and, most important, enables the user to use the tools of MH
meillo@58 2159 itself to operate on the removed messages. One can
meillo@58 2160 .Pn scan
meillo@58 2161 them,
meillo@58 2162 .Pn show
meillo@58 2163 them, and restore them with
meillo@58 2164 .Pn refile .
meillo@58 2165 There's no more
meillo@58 2166 need to use
meillo@58 2167 .Pn mhpath
meillo@58 2168 to switch over from MH tools to Unix tools \(en MH can do it all itself.
meillo@58 2169 .P
meillo@58 2170 This approach matches perfect with the concepts of MH, thus making
meillo@58 2171 it powerful. Hence, I made it the default. And even more, I also
meillo@58 2172 removed the old backup prefix approach, as it is clearly less powerful.
meillo@58 2173 Keeping unused alternative in the code is a bad choice as they likely
meillo@58 2174 gather bugs, by not being constantly tested. Also, the increased code
meillo@58 2175 size and more conditions crease the maintenance costs. By strictly
meillo@58 2176 converting to the trash folder approach, I simplified the code base.
meillo@58 2177 .Pn rmm
meillo@58 2178 calls
meillo@58 2179 .Pn refile
meillo@58 2180 internally to move the to-be-removed
meillo@58 2181 message to the trash folder (\c
meillo@58 2182 .Fn +trash
meillo@58 2183 by default). Messages
meillo@58 2184 there can be operated on like on any other message in the storage.
meillo@58 2185 The sweep clean, one can use
meillo@82 2186 .Cl "rmm -unlink +trash a" ,
meillo@58 2187 where the
meillo@82 2188 .Sw -unlink
meillo@58 2189 switch causes the files to be truly unliked instead
meillo@58 2190 of moved to the trash folder.
meillo@58 2191
meillo@58 2192
meillo@58 2193 .H2 "Path Notations
meillo@58 2194 .P
meillo@58 2195 foo
meillo@58 2196
meillo@58 2197
meillo@58 2198 .H2 "MIME Integration
meillo@58 2199 .P
meillo@58 2200 user-visible access to whole messages and MIME parts are inherently
meillo@58 2201 different
meillo@58 2202
meillo@58 2203
meillo@58 2204 .H2 "Of One Cast
meillo@58 2205 .P