masqmail

view man/masqmail.route.5 @ 180:1472a6a73b1c

do *not* use the openssl option -crlf in a wrapper command see masqmail.route(5) for details
author meillo@marmaro.de
date Wed, 14 Jul 2010 17:10:28 +0200
parents 15b3c71254cb
children dc89737b27aa
line source
1 .TH masqmail.route 5 2010-07-06 masqmail-0.2.25 "File Formats"
3 .SH NAME
4 masqmail.route \- masqmail route configuration file
7 .SH DESCRIPTION
9 This man page describes the syntax of the route configuration files of \fBmasqmail (8)\fR.
10 Their usual locations are in \fI/etc/masqmail/\fR.
12 .SH OPTIONS
14 .TP
15 \fBprotocol\fR = \fIstring\fR
17 \fIstring\fR can be one of `smtp' or `pipe', default is `smtp'.
18 If set to `smtp', mail will be sent with the SMTP protocol to its destination.
19 If set to `pipe', you also have to set `pipe' to a command, the message will then be piped to a program.
20 See option `pipe' below.
22 .TP
23 \fBmail_host\fR = \fIstring\fR
25 This is preferably the mail server of your ISP.
26 All outgoing messages will be sent to this host which will distribute them to their destinations.
27 If you do not set this mails will be sent directly.
28 Because the mail server is probably `near' to you, mail transfer will be much faster if you use it.
30 You can optionally give a port number following the host name and a colon, eg mail_host="mail.foo.com:25".
32 .TP
33 \fBresolve_list\fR = \fIlist\fR
35 Specify the method how the domain of the server is resolved.
36 Possible values are dns_mx, dns_a, byname.
37 For `dns_mx', the domain is assumed to be an MX pointer to a list of host names,
38 these will be tried each in order (lowest preference value first, equal preference values in random order).
39 For `dns_a', the domain is assumed to be an A pointer.
40 For `byname', the library function \fBgethostbyname(3)\fR will be used.
42 The default is "dns_mx;dns_a;byname".
44 .TP
45 \fBconnect_error_fail\fR = \fIboolean\fR
47 If this is set, a connection error will cause a mail delivery to fail, ie. it will be bounced.
48 If it is unset, it will just be defered.
50 Default is false.
51 The reason for this is that masqmail is designed for non permanent internet connections,
52 where such errors may occur quite often, and a bounce would be annoying.
54 For the default local_net route it is set to true.
56 .TP
57 \fBhelo_name\fR = \fIstring\fR
59 Set the name given with the HELO/EHLO command. If this is not set,
60 \fBhost_name\fR from \fImasqmail.conf\fR will be used,
61 if the \fBdo_correct_helo\fR option (see below) is unset.
63 .TP
64 \fBdo_correct_helo\fR = \fIboolean\fR
66 If this is set, masqmail tries to look up your host name as it appears
67 on the internet and sends this in the HELO/EHLO command.
68 Some servers are so picky that they want this.
69 Which is really crazy.
70 It just does not make any sense to lie about ones own identity,
71 because it can always be looked up by the server.
72 Nobody should believe in the name given by HELO/EHLO anyway.
73 If this is not set, \fBhost_name\fR from \fImasqmail.conf\fR or as given with
74 the \fBhelo_name\fR (see above) will be used.
76 .TP
77 \fBdo_pipelining\fR = \fIboolean\fR
79 If this is set to false, masqmail will not use ESMTP PIPELINING,
80 even if the server announces that it is able to cope with it.
81 Default is true.
83 You do not want to set this to false unless the mail setup on the
84 remote server side is really broken.
85 Keywords: wingate.
87 .TP
88 \fBallowed_mail_locals\fR = \fIlist\fR
90 This is a semicolon `;' separated list of local parts which will be allowed
91 to send mail through this connection.
92 If unset and \fBnot_allowed_mail_locals\fR is also unset, all users are allowed.
94 .TP
95 \fBnot_allowed_mail_locals\fR = \fIlist\fR
97 This is a semicolon `;' separated list of local parts which will be not allowed
98 to send mail through this connection.
99 Local parts in this list will not be allowed to use this route even if they
100 are part of \fBallowed_mail_locals\fR (see above).
102 .TP
103 \fBallowed_return_paths\fR = \fIlist\fR
105 This is a semicolon `;' separated list of addresses.
106 Messages which have one of these addresses as the return path will be used using this route
107 (if not also in \fBnot_allowed_return_paths\fR or an item in \fBnot_allowed_mail_locals\fR matches).
109 Patterns containing `?' and `*' can be used.
110 The special item "<>" matches the null sender address (eg. failure notices or delivery notifications).
112 .TP
113 \fBnot_allowed_return_paths\fR = \fIlist\fR
115 This is a semicolon `;' separated list of addresses.
116 Messages which have one of these addresses as the return path will not
117 be used using this route (even if also in \fBallowed_return_paths\fR
118 or an item in \fBallowed_mail_locals\fR matches).
120 Patterns containing `?' and `*' can be used.
121 The special item "<>" matches the null sender address (eg. failure notices or delivery notifications).
123 .TP
124 \fBallowed_rcpt_domains\fR = \fIlist\fR
126 A list of recipient domains where mail will be sent to.
127 This is for example useful if you use this route configuration when connected to another LAN via ppp.
128 Patterns containing `?' and `*' can be used.
130 .TP
131 \fBnot_allowed_rcpt_domains\fR = \fIlist\fR
133 A list of recipient domains where mail will not be sent to.
134 This is for example useful if you send mail directly (\fBmail_host\fR is not set)
135 and you know of hosts that will not accept mail from you because they use a dialup list
136 (eg. \fBhttp://maps.vix.com/dul/\fR).
137 If any domain matches both \fBallowed_rcpt_domains\fR and \fBnot_allowed_rcpt_domains\fR,
138 mail will not be sent to this domain.
139 Patterns containing `?' and `*' can be used.
141 .TP
142 \fBset_h_from_domain\fR = \fIstring\fR
144 Replace the domain part in `From:' headers with this value.
145 This may be useful if you use a private, outside unknown address on your local LAN
146 and want this to be replaced by the domain of the address of your email address on the internet.
147 Note that this is different to \fBset_return_path_domain\fR, see below.
149 .TP
150 \fBset_h_reply_to_domain\fR = \fIstring\fR
152 Same as \fBset_h_from_domain\fP, but for the `Reply-To' header.
154 .TP
155 \fBset_return_path_domain\fR = \fIstring\fR
157 Sets the domain part of the envelope from address.
158 Some hosts check whether this is the same as the net the connection is coming from.
159 If not, they reject the mail because they suspect spamming.
160 It should be a valid address, because some mail servers also check that.
161 You can also use this to set it to your usual address on the internet
162 and put a local address only known on your LAN in the configuration of your mailer.
163 Only the domain part will be changed, the local part remains unchanged.
164 Use \fBmap_return_path_addresses\fR for rewriting local parts.
166 .TP
167 \fBmap_h_from_addresses\fR = \fIlist\fR
169 This is similar to \fBset_h_from_domain\fR, but more flexible.
170 Set this to a list which maps local parts to a full RFC 822 compliant email address,
171 the local parts (the keys) are separated from the addresses (the values) by colons (`:').
173 Example:
175 map_h_from_addresses = "john: John Smith <jsmith@mail.academic.edu>; charlie: Charlie Miller <cmiller@mx.commercial.com>"
177 You can use patterns, eg. * as keys.
179 .TP
180 \fBmap_h_reply_to_addresses\fR = \fIlist\fR
182 Same as \fBmap_h_from_addresses\fR, but for the `Reply-To:' header.
184 .TP
185 \fBmap_h_mail_followup_to_addresses\fR = \fIlist\fR
187 Same as \fBmap_h_from_addresses\fR, but for the `Mail-Followup-To:' header.
188 Useful when replying to mailing lists.
190 .TP
191 \fBmap_return_path_addresses\fR = \fIlist\fR
193 This is similar to \fBset_return_path_domain\fR, but more flexible.
194 Set this to a list which maps local parts to a full RFC 821 compliant email address,
195 the local parts (the keys) are separated from the addresses (the values) by colons (`:').
196 Note that this option takes RFC 821 addresses while \fBmap_h_from_addresses\fR takes RFC 822 addresses.
197 The most important difference is that RFC 821 addresses have no full name.
199 Example:
201 map_return_path_addresses = "john: <jsmith@mail.academic.edu>; charlie: <cmiller@mx.commercial.com>"
203 You can use patterns, eg. * as keys.
205 .TP
206 \fBexpand_h_sender_address\fR = \fIboolean\fR
208 This sets the domain of the sender address as given by the Sender: header
209 to the same address as in the envelope return path address
210 (which can be set by either \fBset_return_path_domain\fR or \fBmap_return_path_addresses\fR).
211 This is for mail clients (eg. Microsoft Outlook) which use this address as the sender address.
212 Though they should use the From: address, see RFC 821.
213 If \fBfetchmail(1)\fR encounters an unqualified Sender: address,
214 it will be expanded to the domain of the pop server, which is almost never correct.
215 Default is true.
217 .TP
218 \fBexpand_h_sender_domain\fR = \fIboolean\fR
220 Like \fBexpand_h_sender_address\fR, but sets the domain only.
221 Deprecated, will be removed in a later version.
223 .TP
224 \fBlast_route\fR = \fIboolean\fR
226 If this is set, a mail which would have been delivered using this route,
227 but has failed temporarily, will not be tried to be delivered using the next route.
229 If you have set up a special route with filters using the lists `allowed_rcpt_domains',
230 `allowed_return_paths', and `allowed_mail_locals' or their complements (not_),
231 and the mail passing these rules should be delivered using this route only,
232 you should set this to `true'.
233 Otherwise the mail would be passed to the next route (if any),
234 unless that route has rules which prevent that.
236 Default is false.
238 .TP
239 \fBauth_name\fR = \fIstring\fR
241 Set the authentication type for ESMTP AUTH authentication.
242 Currently only `cram-md5' and `login' are supported.
244 .TP
245 \fBauth_login\fR = \fIstring\fR
247 Your account name for ESMTP AUTH authentication.
249 .TP
250 \fBauth_secret\fR = \fIstring\fR
252 Your secret for ESMTP AUTH authentication.
254 .TP
255 \fBpop3_login\fR = \fIfile\fR
257 If your Mail server requires SMTP-after-POP,
258 set this to a get configuration (see \fBmasqmail.get(5)\fR).
259 If you login to the POP server before you send, this is not necessary.
261 .TP
262 \fBwrapper\fR = \fIcommand\fR
264 If set, instead of opening a connection to a remote server,
265 \fIcommand\fR will be called and all traffic will be piped to its stdin and from its stdout.
266 Purpose is to tunnel ip traffic, eg. for ssl.
268 Example for ssl tunneling:
270 wrapper="/usr/bin/openssl s_client \-quiet \-connect mail.gmx.net:465 2>/dev/null"
272 Note: The above line works with masqmail,
273 but listening on Port 465 for SSL-encrypted connections is deprecated.
274 The modern way is STARTTLS (RFC-3207).
275 This could be covered by the following command.
276 Unfortunately, masqmail doesn't support that yet (as of 0.2.25).
278 wrapper="/usr/bin/openssl s_client \-quiet \-starttls smtp \-connect mail.gmx.net:25 2>/dev/null"
280 Note for openssl:
281 Ensure that stderr is redirected.
282 Do *not* use \-crlf in the wrapper command, because masqmail does already insert CRLF.
283 However, you might want to specify \-crlf if you want to test your wrapper command
284 interactively on the command line.
286 .TP
287 \fBpipe\fR = \fIcommand\fR
289 If set, and protocol is set to `pipe',
290 \fIcommand\fR will be called and the message will be piped to its stdin.
291 Purpose is to use gateways to uucp, fax, sms or whatever else.
293 You can use variables to give as arguments to the command,
294 these are the same as for the mda in the main configuration, see \fBmasqmail.conf(5)\fR.
296 .TP
297 \fBpipe_fromline = \fIboolean\fR
299 If this is set, and protocol is set to `pipe',
300 a from line will be prepended to the output stream whenever a pipe command is called.
301 Default is false.
303 .TP
304 \fBpipe_fromhack = \fIboolean\fR
306 If this is set, and protocol is set to `pipe',
307 each line beginning with `From ' is replaced with `>From ' whenever a pipe command is called.
308 You probably want this if you have set \fBpipe_fromline\fR above.
309 Default is false.
312 .SH AUTHOR
314 Masqmail was written by Oliver Kurth.
315 It is now maintained by Markus Schnalke <meillo@marmaro.de>.
317 You will find the newest version of masqmail at \fBhttp://marmaro.de/prog/masqmail/\fR.
318 There is also a mailing list, you will find information about it at masqmail's main site.
321 .SH BUGS
323 Please report bugs to the mailing list.
325 .SH SEE ALSO
327 \fBmasqmail(8)\fR, \fBmasqmail.conf(5)\fR, \fBmasqmail.get(5)\fR