docs/master
view discussion.roff @ 180:731e747a805b
Applied corrections by Lydi.
| author | markus schnalke <meillo@marmaro.de> |
|---|---|
| date | Wed, 11 Jul 2012 00:00:34 +0200 |
| parents | b59201e345e5 |
| children | eb6eeb10afd5 |
line source
1 .H0 "Discussion
2 .P
3 This main chapter discusses the practical work accomplished in the
4 mmh project.
5 It is structured along the goals set for the project.
6 The concrete work undertaken
7 is described in the examples of how the general goals were achieved.
8 The discussion compares the current version of mmh with the state of
9 nmh just before the mmh project started, i.e. fall 2011.
10 Current changes of nmh will be mentioned only as side notes.
11 .\" XXX where do I discuss the parallel development of nmh?
15 .\" --------------------------------------------------------------
16 .H1 "Streamlining
18 .P
19 MH once provided anything necessary for email handling.
20 The community around nmh has the similar understanding that nmh should
21 provide a complete email system.
22 In fundamental contrast, mmh shall be an MUA only.
23 I believe that the development of all-in-one mail systems is obsolete.
24 Today, email is too complex to be fully covered by a single project.
25 Such a project will not be able to excel in all aspects.
26 Instead, the aspects of email should be covered by multiple projects,
27 which then can be combined to form a complete system.
28 Excellent implementations for the various aspects of email already exist.
29 Just to name three examples: Postfix is a specialized MTA,
30 .\" XXX homepages verlinken
31 Procmail is a specialized MDA, and Fetchmail is a specialized MRA.
32 I believe that it is best to use such specialized tools instead of
33 providing the same function again as a side-component in the project.
34 .\" XXX mail agent picture here
35 .P
36 Doing something well requires focusing on a small set of specific aspects.
37 Under the assumption that development focussed on a particular area
38 produces better results there, specialized projects will be superior
39 in their field of focus.
40 Hence, all-in-one mail system projects \(en no matter if monolithic
41 or modular \(en will never be the best choice in any of the fields.
42 Even in providing the best consistent all-in-one system, they are likely
43 to be beaten by projects that focus only on integrating existing mail
44 components to create a homogeneous system.
45 .P
46 The limiting resource in the community development of free software
47 is usually man power.
48 .\" XXX FIXME ref!
49 If the development power is spread over a large development area,
50 it becomes even more difficult to compete with the specialists in the
51 various fields.
52 The concrete situation for MH-based mail systems is even tougher,
53 given their small and aged community, concerning both developers and users.
54 .P
55 In consequence, I believe that the available development resources
56 should focus on the point where MH is most unique.
57 This is clearly the user interface \(en the MUA.
58 Peripheral parts should be removed to streamline mmh for the MUA task.
61 .H2 "Mail Transfer Facilities
62 .Id mail-transfer-facilities
63 .P
64 In contrast to nmh, which also provides mail submission and mail retrieval
65 agents, mmh is an MUA only.
66 This general difference initiated the development of mmh.
67 The removal of the mail transfer facilities was the first work task
68 in the mmh project.
69 .P
70 Focusing on one mail agent role only, is motivated by Eric Allman's
71 experience with Sendmail.
72 He identified the limitation of Sendmail to the MTA task as one reason for
73 its success:
74 .[ [
75 costales sendmail
76 .], p. xviii]
77 .QS
78 Second, I limited myself to the routing function \(en
79 I wouldn't write user agents or delivery back-ends.
80 This was a departure of the dominant through of the time,
81 in which routing logic, local delivery, and often the network code
82 were incorporated directly into the user agents.
83 .QE
84 .P
85 In nmh, the Mail Submission Agent (MSA) is called
86 \fIMessage Transfer Service\fP (MTS).
87 This facility, implemented by the
88 .Pn post
89 command, established network connections and spoke SMTP to submit
90 messages to be relayed to the outside world.
91 The changes in email demanded changes in this part of nmh as well.
92 Encryption and authentication for network connections
93 needed to be supported, hence TLS and SASL were introduced into nmh.
94 This added complexity to nmh without improving it in its core functions.
95 Also, keeping up with recent developments in the field of
96 mail transfer requires development power and specialists.
97 In mmh, this whole facility was simply cut off.
98 .Ci f6aa95b724fd8c791164abe7ee5468bf5c34f226
99 .Ci fecd5d34f65597a4dfa16aeabea7d74b191532c3
100 .Ci 156d35f6425bea4c1ed3c4c79783dc613379c65b
101 Instead, mmh depends on an external MSA.
102 The only outgoing interface available to mmh is the
103 .Pn sendmail
104 command, which almost any MSA provides.
105 If not, a wrapper program can be written.
106 It must read the message from the standard input, extract the
107 recipient addresses from the message header, and hand the message
108 over to the MSA.
109 For example, a wrapper script for qmail would be:
110 .VS
111 #!/bin/sh
112 exec qmail-inject # ignore command line arguments
113 VE
114 The requirement to parse the recipient addresses out of the message header
115 is likely to be removed in the future.
116 Then mmh would pass the recipient addresses as command line arguments.
117 This appears to be the better interface.
118 .\" XXX implement it
119 .P
120 To retrieve mail, the
121 .Pn inc
122 command acted as an Mail Retrieval Agent (MRA).
123 It established network connections
124 and spoke POP3 to retrieve mail from remote servers.
125 As with mail submission, the network connections required encryption and
126 authentication, thus TLS and SASL were added.
127 Support for message retrieval through IMAP will soon become necessary
128 additions, too, and likewise for any other changes in mail transfer.
129 Not so for mmh because it has dropped the support for retrieving mail
130 from remote locations.
131 .Ci ab7b48411962d26439f92f35ed084d3d6275459c
132 Instead, it depends on an external tool to cover this task.
133 Mmh has two paths for messages to enter mmh's mail storage:
134 (1) Mail can be incorporated with
135 .Pn inc
136 from the system maildrop, or (2) with
137 .Pn rcvstore
138 by reading them, one at a time, from the standard input.
139 .P
140 With the removal of the MSA and MRA, mmh converted from an all-in-one
141 mail system to being an MUA only.
142 Now, of course, mmh depends on third-party software.
143 An external MSA is required to transfer mail to the outside world;
144 an external MRA is required to retrieve mail from remote machines.
145 Excellent implementations of such software exist,
146 which likely are superior than the internal version.
147 Additionally, the best suiting programs can be freely chosen.
148 .P
149 As it had already been possible to use an external MSA or MRA,
150 why not keep the internal version for convenience?
151 .\" XXX ueberleitung
152 The question whether there is sense in having a fall-back pager in all
153 the command line tools, for the cases when
154 .Pn more
155 or
156 .Pn less
157 are not available, appears to be ridiculous.
158 Of course, MSAs and MRAs are more complex than text pagers
159 and not necessarily available but still the concept of orthogonal
160 design holds: ``Write programs that do one thing and do it well.''
161 .[
162 mcilroy unix phil
163 p. 53
164 .]
165 .[
166 mcilroy bstj foreword
167 .]
168 Here, this part of the Unix philosophy was applied not only
169 to the programs but to the project itself.
170 In other words:
171 Develop projects that focus on one thing and do it well.
172 Projects which have grown complex should be split, for the same
173 reasons that programs which have grown complex should be split.
174 If it is conceptionally more elegant to have the MSA and MRA as
175 separate projects then they should be separated.
176 In my opinion, this is the case here.
177 The RFCs propose this separation by clearly distinguishing the different
178 mail handling tasks.
179 .[
180 rfc 821
181 .]
182 The small interfaces between the mail agents support the separation.
183 .P
184 Email once had been small and simple.
185 At that time,
186 .Pn /bin/mail
187 had covered everything there was to email and still was small and simple.
188 Later, the essential complexity of email increased.
189 (Essential complexity is the complexity defined by the problem itself.\0
190 .[[
191 brooks no silver bullet
192 .]])
193 Email systems reacted to this change: they grew.
194 RFCs started to introduce the concept of mail agents to separate the
195 various tasks because they became more extensive and new tasks appeared.
196 As the mail systems grew even more, parts were split off.
197 For instance, a POP server was included in the original MH;
198 it was removed in nmh.
199 Now is the time to go one step further and split off the MSA and MRA, too.
200 Not only does this decrease the code size of the project,
201 more importantly, it unburdens mmh of the whole field of
202 message transfer with all its implications for the project.
203 There is no more need for concern with changes in network transfer.
204 This independence is gained by depending on an external program
205 that covers the field.
206 Today, this is a reasonable exchange.
207 .P
208 .\" XXX ueberleitung ???
209 Functionality can be added in three different ways:
210 .LI 1
211 Implementing the function in the project itself.
212 .LI 2
213 Depending on a library that provides the function.
214 .LI 3
215 Depending on a program that provides the function.
216 .LP
217 .\" XXX Rework sentence
218 While implementing the function in the project itself leads to the
219 largest increase in code size and requires the most maintenance
220 and development work,
221 it increases the project's independence of other software the most.
222 Using libraries or external programs requires less maintenance work
223 but introduces dependencies on external software.
224 Programs have the smallest interfaces and provide the best separation,
225 but possibly limit the information exchange.
226 External libraries are more strongly connected than external programs,
227 thus information can be exchanged in a more flexible manner.
228 Adding code to a project increases maintenance work.
229 .\" XXX ref
230 Implementing complex functions in the project itself adds
231 a lot of code.
232 This should be avoided if possible.
233 Hence, the dependencies only change in their character,
234 not in their existence.
235 In mmh, library dependencies on
236 .Pn libsasl2
237 and
238 .Pn libcrypto /\c
239 .Pn libssl
240 were traded against program dependencies on an MSA and an MRA.
241 This also meant trading build-time dependencies against run-time
242 dependencies.
243 Besides providing stronger separation and greater flexibility,
244 program dependencies also allowed
245 over 6\|000 lines of code to be removed from mmh.
246 This made mmh's code base about 12\|% smaller.
247 Reducing the project's code size by such an amount without actually
248 losing functionality is a convincing argument.
249 Actually, as external MSAs and MRAs are likely superior to the
250 project's internal versions, the common user even gains functionality.
251 .P
252 Users of MH should not have problems setting up an external MSA and MRA.
253 Also, the popular MSAs and MRAs have large communities and a lot
254 of available documentation.
255 Choices for MSAs range from full-featured MTAs such as
256 .\" XXX refs
257 .I Postfix ,
258 over mid-size MTAs such as
259 .I masqmail
260 and
261 .I dma ,
262 to small forwarders such as
263 .I ssmtp
264 and
265 .I nullmailer .
266 Choices for MRAs include
267 .I fetchmail ,
268 .I getmail ,
269 .I mpop
270 and
271 .I fdm .
274 .H2 "Non-MUA Tools
275 .P
276 One goal of mmh is to remove the tools that are not part of the MUA's task.
277 Further more, any tools that do not significantly improve the MUA's job
278 should be removed.
279 Loosely related and rarely used tools distract from the lean appearance.
280 They require maintenance work without adding much to the core task.
281 By removing these tools, the project shall become more streamlined
282 and focused.
283 In mmh, the following tools are not available anymore:
284 .BU
285 .Pn conflict
286 was removed
287 .Ci 8b235097cbd11d728c07b966cf131aa7133ce5a9
288 because it is a mail system maintenance tool that is not MUA-related.
289 It even checked
290 .Fn /etc/passwd
291 and
292 .Fn /etc/group
293 for consistency, which is completely unrelated to email.
294 A tool like
295 .Pn conflict
296 is surely useful, but it should not be shipped with mmh.
297 .\" XXX historic reasons?
298 .BU
299 .Pn rcvtty
300 was removed
301 .Ci 14767c94b3827be7c867196467ed7aea5f6f49b0
302 because its use case of writing to the user's terminal
303 on receival of mail is obsolete.
304 If users like to be informed of new mail, the shell's
305 .Ev MAILPATH
306 variable or graphical notifications are technically more appealing.
307 Writing directly to terminals is hardly ever desired today.
308 If, though, one prefers this approach, the standard tool
309 .Pn write
310 can be used in a way similar to:
311 .VS
312 scan -file - | write `id -un`
313 VE
314 .BU
315 .Pn viamail
316 .\" XXX was macht viamail
317 was removed
318 .Ci eda72d6a7a7c20ff123043fb7f19c509ea01f932
319 when the new attachment system was activated, because
320 .Pn forw
321 could then cover the task itself.
322 The program
323 .Pn sendfiles
324 was rewritten as a shell script wrapper around
325 .Pn forw .
326 .Ci 0e82199cf3c991a173e0ac8aa776efdb3ded61e6
327 .BU
328 .Pn msgchk
329 .\" XXX was macht msgchk
330 was removed
331 .Ci bb9360ead7eb7a3fedcce2eeedfc660014e41dbe ,
332 because it lost its use case when POP support was removed.
333 A call to
334 .Pn msgchk
335 provided hardly more information than:
336 .VS
337 ls -l /var/mail/meillo
338 VE
339 It did distinguish between old and new mail, but
340 these details can be retrieved with
341 .Pn stat (1),
342 too.
343 A small shell script could be written to print the information
344 in a similar way, if truly necessary.
345 As mmh's
346 .Pn inc
347 only incorporates mail from the user's local maildrop,
348 and thus no data transfers over slow networks are involved,
349 there is hardly any need to check for new mail before incorporating it.
350 .BU
351 .Pn msh
352 was removed
353 .Ci 916690191222433a6923a4be54b0d8f6ac01bd02
354 because the tool was in conflict with the philosophy of MH.
355 It provided an interactive shell to access the features of MH,
356 but it was not just a shell tailored to the needs of mail handling.
357 Instead, it was one large program that had several MH tools built in.
358 This conflicts with the major feature of MH of being a tool chest.
359 .Pn msh 's
360 main use case had been accessing Bulletin Boards, which have ceased to
361 be popular.
362 .P
363 Removing
364 .Pn msh
365 together with the truly archaic code relicts
366 .Pn vmh
367 and
368 .Pn wmh
369 saved more than 7\|000 lines of C code \(en
370 about 15\|% of the project's original source code amount.
371 Having less code \(en with equal readability, of course \(en
372 for the same functionality is an advantage.
373 Less code means less bugs and less maintenance work.
374 As
375 .Pn rcvtty
376 and
377 .Pn msgchk
378 are assumed to be rarely used and can be implemented in different ways,
379 why should one keep them?
380 Removing them streamlines mmh.
381 .Pn viamail 's
382 use case is now partly obsolete and partly covered by
383 .Pn forw ,
384 hence there's no reason to still maintain it.
385 .Pn conflict
386 is not related to the mail client, and
387 .Pn msh
388 conflicts with the basic concept of MH.
389 These two tools might still be useful, but they should not be part of mmh.
390 .P
391 Finally, there is
392 .Pn slocal .
393 .Pn slocal
394 is an MDA and thus not directly MUA-related.
395 It should be removed from mmh, because including it conflicts with
396 the idea that mmh is an MUA only.
397 .Pn slocal
398 should rather become a separate project.
399 However,
400 .Pn slocal
401 provides rule-based processing of messages, like filing them into
402 different folders, which is otherwise not available in mmh.
403 Although
404 .Pn slocal
405 neither pulls in dependencies, nor does it include a separate
406 technical area (cf. Sec.
407 .Cf mail-transfer-facilities ),
408 it still accounts for about 1\|000 lines of code that need to be maintained.
409 As
410 .Pn slocal
411 is almost self-standing, it should be split off into a separate project.
412 This would cut the strong connection between the MUA mmh and the MDA
413 .Pn slocal .
414 For anyone not using MH,
415 .Pn slocal
416 would become yet another independent MDA, like
417 .I procmail .
418 Then
419 .Pn slocal
420 could be installed without the complete MH system.
421 Likewise, mmh users could decide to use
422 .I procmail
423 without having a second, unused MDA,
424 .Pn slocal ,
425 installed.
426 That appears to be conceptionally the best solution.
427 Yet,
428 .Pn slocal
429 is not split off.
430 I defer the decision over
431 .Pn slocal
432 out of a need for deeper investigation.
433 In the meanwhile, it remains part of mmh.
434 However, its continued existence is not significant because
435 .Pn slocal
436 is unrelated to the rest of the project.
440 .H2 "Displaying Messages
441 .Id mhshow
442 .P
443 Since the very beginning, already in the first concept paper,
444 .\" XXX ref!!!
445 .Pn show
446 had been MH's message display program.
447 .Pn show
448 mapped message numbers and sequences to files and invoked
449 .Pn mhl
450 to have the files formatted.
451 With MIME, this approach was not sufficient anymore.
452 MIME messages can consist of multiple parts. Some parts are not
453 directly displayable and text content might be encoded in
454 foreign charsets.
455 .Pn show 's
456 understanding of messages and
457 .Pn mhl 's
458 display capabilities could not cope with the task any longer.
459 .P
460 Instead of extending these tools, additional tools were written from
461 scratch and added to the MH tool chest.
462 Doing so is encouraged by the tool chest approach.
463 Modular design is a great advantage for extending a system,
464 as new tools can be added without interfering with existing ones.
465 First, the new MIME features were added in form of the single program
466 .Pn mhn .
467 The command
468 .Cl "mhn -show 42
469 would show the MIME message numbered 42.
470 With the 1.0 release of nmh in February 1999, Richard Coleman finished
471 the split of
472 .Pn mhn
473 into a set of specialized tools, which together covered the
474 multiple aspects of MIME.
475 One of them was
476 .Pn mhshow ,
477 which replaced
478 .Cl "mhn -show" .
479 It was capable of displaying MIME messages appropriately.
480 .P
481 From then on, two message display tools were part of nmh,
482 .Pn show
483 and
484 .Pn mhshow .
485 To ease the life of users,
486 .Pn show
487 was extended to automatically hand the job over to
488 .Pn mhshow
489 if displaying the message would be beyond
490 .Pn show 's
491 abilities.
492 In consequence, the user would simply invoke
493 .Pn show
494 (possibly through
495 .Pn next
496 or
497 .Pn prev )
498 and get the message printed with either
499 .Pn show
500 or
501 .Pn mhshow ,
502 whatever was more appropriate.
503 .P
504 Having two similar tools for essentially the same task is redundant.
505 Usually, users would not distinguish between
506 .Pn show
507 and
508 .Pn mhshow
509 in their daily mail reading.
510 Having two separate display programs was therefore mainly unnecessary
511 from a user's point of view.
512 Besides, the development of both programs needed to be in sync,
513 to ensure that the programs behaved in a similar way,
514 because they were used like a single tool.
515 Different behavior would have surprised the user.
516 .P
517 Today, non-MIME messages are rather seen to be a special case of
518 MIME messages, although it is the other way round.
519 As
520 .Pn mhshow
521 had already been able to display non-MIME messages, it appeared natural
522 to drop
523 .Pn show
524 in favor of using
525 .Pn mhshow
526 exclusively.
527 .Ci 4c1efddfd499300c7e74263e57d8aa137e84c853
528 Removing
529 .Pn show
530 is no loss in function, because functionally
531 .Pn mhshow
532 covers it completely.
533 The old behavior of
534 .Pn show
535 can still be emulated with the simple command line:
536 .VS
537 mhl `mhpath c`
538 VE
539 .P
540 For convenience,
541 .Pn mhshow
542 was renamed to
543 .Pn show
544 after
545 .Pn show
546 was gone.
547 It is clear that such a rename may confuse future developers when
548 trying to understand the history.
549 Nevertheless, I consider the convenience on the user's side,
550 to call
551 .Pn show
552 when they want a message to be displayed, to outweigh the inconvenience
553 on the developer's side when understanding the project history.
554 .P
555 To prepare for the transition,
556 .Pn mhshow
557 was reworked to behave more like
558 .Pn show
559 first.
560 (cf. Sec.
561 .Cf mhshow )
562 .\" XXX code commits?
563 Once the tools behaved more alike, the replacing appeared to be
564 even more natural.
565 Today, mmh's new
566 .Pn show
567 has become the one single message display program once more,
568 with the difference
569 that today it handles MIME messages as well as non-MIME messages.
570 The outcome of the transition is one program less to maintain,
571 no second display program for users to deal with,
572 and less system complexity.
573 .P
574 Still, removing the old
575 .Pn show
576 hurts in one regard: It had been such a simple program.
577 Its lean elegance is missing from the new
578 .Pn show ,
579 .\" XXX
580 however there is no alternative;
581 supporting MIME demands higher essential complexity.
583 .ig
584 XXX
585 Consider including text on scan listings here
587 Scan listings shall not contain body content. Hence, removed this feature.
588 Scan listings shall operator on message headers and non-message information
589 only. Displaying the beginning of the body complicates everything too much.
590 That's no surprise, because it's something completely different. If you
591 want to examine the body, then use show(1)/mhshow(1).
592 Changed the default scan formats accordingly.
593 .Ci 70b2643e0da8485174480c644ad9785c84f5bff4
594 ..
599 .H2 "Configure Options
600 .P
601 Customization is a double-edged sword.
602 It allows better suiting setups, but not for free.
603 There is the cost of code complexity to be able to customize.
604 There is the cost of less tested setups, because there are
605 more possible setups and especially corner cases.
606 Additionally, there is the cost of choice itself.
607 The code complexity directly affects the developers.
608 Less tested code affects both users and developers.
609 The problem of choice affects the users, for once by having to choose,
610 but also by more complex interfaces that require more documentation.
611 Whenever options add few advantages but increase the complexity of the
612 system, they should be considered for removal.
613 I have reduced the number of project-specific configure options from
614 fifteen to three.
616 .U3 "Mail Transfer Facilities
617 .P
618 With the removal of the mail transfer facilities five configure
619 options vanished:
620 .P
621 The switches
622 .Sw --with-tls
623 and
624 .Sw --with-cyrus-sasl
625 had activated the support for transfer encryption and authentication.
626 .\" XXX cf
627 .\" XXX gruende kurz wiederholen
628 This is not needed anymore.
629 .Ci fecd5d34f65597a4dfa16aeabea7d74b191532c3
630 .Ci 156d35f6425bea4c1ed3c4c79783dc613379c65b
631 .P
632 .\" XXX cf
633 .\" XXX ``For the same reason ...''
634 The configure switch
635 .Sw --enable-pop
636 activated the message retrieval facility.
637 The code area that would be conditionally compiled in for TLS and SASL
638 support had been small.
639 The conditionally compiled code area for POP support had been much larger.
640 Whereas the code base changes would only slightly change on toggling
641 TLS or SASL support, it changed much on toggling POP support.
642 The changes in the code base could hardly be overviewed.
643 By having POP support togglable, a second code base had been created,
644 one that needed to be tested.
645 This situation is basically similar for the conditional TLS and SASL
646 code, but there the changes are minor and can yet be overviewed.
647 Still, conditional compilation of a code base creates variations
648 of the original program.
649 More variations require more testing and maintenance work.
650 .P
651 Two other options only specified default configuration values:
652 .Sw --with-mts
653 defined the default transport service.
654 .Ci f6aa95b724fd8c791164abe7ee5468bf5c34f226
655 With
656 .Sw --with-smtpservers
657 default SMTP servers could be specified.
658 .Ci 128545e06224233b7e91fc4c83f8830252fe16c9
659 Both of them became irrelevant when the SMTP transport service was removed.
660 .\" XXX code ref
661 In mmh, all messages are handed over to
662 .Pn sendmail
663 for transportation.
666 .U3 "Backup Prefix
667 .P
668 The backup prefix is the string that was prepended to message
669 filenames to tag them as deleted.
670 By default it had been the comma character (`\fL,\fP').
671 .\" XXX Zeitlich ordnen
672 In July 2000, Kimmo Suominen introduced
673 the configure option
674 .Sw --with-hash-backup
675 to change the default to the hash character `\f(CW#\fP'.
676 The choice was probably personal preference, because first, the
677 option was named
678 .Sw --with-backup-prefix.
679 and had the prefix character as argument.
680 But giving the hash character as argument caused too many problems
681 for Autoconf,
682 thus the option was limited to use the hash character as the default prefix.
683 This supports the assumption, that the choice for the hash was
684 personal preference only.
685 Being related or not, words that start with the hash character
686 introduce a comment in the Unix shell.
687 Thus, the command line
688 .Cl "rm #13 #15
689 calls
690 .Pn rm
691 without arguments because the first hash character starts the comment
692 that reaches until the end of the line.
693 To delete the backup files,
694 .Cl "rm ./#13 ./#15"
695 needs to be used.
696 Using the hash as backup prefix can be seen as a precaution against
697 data loss.
698 .P
699 First, I removed the configure option but added the profile entry
700 .Pe backup-prefix ,
701 which allows to specify an arbitrary string as backup prefix.
702 .Ci 6c40d481d661d532dd527eaf34cebb6d3f8ed086
703 Profile entries are the common method to change mmh's behavior.
704 This change did not remove the choice but moved it to a location where
705 it suited better.
706 .P
707 Eventually, however, the new trash folder concept
708 (cf. Sec.
709 .Cf trash-folder )
710 removed the need for the backup prefix completely.
711 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
712 .Ci ca0b3e830b86700d9e5e31b1784de2bdcaf58fc5
715 .U3 "Editor and Pager
716 .P
717 The two configure options
718 .CW --with-editor=EDITOR
719 .CW --with-pager=PAGER
720 were used to specify the default editor and pager at configure time.
721 Doing so at configure time made sense in the eighties,
722 when the set of available editors and pagers varied much across
723 different systems.
724 Today, the situation is more homogeneous.
725 The programs
726 .Pn vi
727 and
728 .Pn more
729 can be expected to be available on every Unix system,
730 as they are specified by POSIX since two decades.
731 (The specifications for
732 .Pn vi
733 and
734 .Pn more
735 appeared in
736 .[
737 posix 1987
738 .]
739 and,
740 .[
741 posix 1992
742 .]
743 respectively.)
744 As a first step, these two tools were hard-coded as defaults.
745 .Ci 5d43a99db70c12a673028c7758c20cbe3e13ef5f
746 Not changed were the
747 .Pe editor
748 and
749 .Pe moreproc
750 profile entries, which allowed the user to override the system defaults.
751 Later, the concept was reworked to respect the standard environment
752 variables
753 .Ev VISUAL
754 and
755 .Ev PAGER
756 if they are set.
757 Today, mmh determines the editor to use in the following order,
758 taking the first available and non-empty item:
759 .LI 1
760 Environment variable
761 .Ev MMHEDITOR
762 .LI 2
763 Profile entry
764 .Pe Editor
765 .LI 3
766 Environment variable
767 .Ev VISUAL
768 .LI 4
769 Environment variable
770 .Ev EDITOR
771 .LI 5
772 Command
773 .Pn vi .
774 .LP
775 .Ci f85f4b7ae62e3d05a945dcd46ead51f0a2a89a9b
776 .P
777 The pager to use is determined in a similar order,
778 also taking the first available and non-empty item:
779 .LI 1
780 Environment variable
781 .Ev MMHPAGER
782 .LI 2
783 Profile entry
784 .Pe Pager
785 (replaces
786 .Pe moreproc )
787 .LI 3
788 Environment variable
789 .Ev PAGER
790 .LI 4
791 Command
792 .Pn more .
793 .LP
794 .Ci 0c4214ea2aec6497d0d67b436bbee9bc1d225f1e
795 .P
796 By respecting the
797 .Ev VISUAL /\c
798 .Ev EDITOR
799 and
800 .Ev PAGER
801 environment variables,
802 the new behavior confirms better to the common style on Unix systems.
803 Additionally, the new approach is more uniform and clearer to users.
806 .U3 "ndbm
807 .P
808 .Pn slocal
809 used to depend on
810 .I ndbm ,
811 a database library.
812 The database is used to store the `\fLMessage-ID\fP's of all
813 messages delivered.
814 This enables
815 .Pn slocal
816 to suppress delivering the same message to the same user twice.
817 (This features was enabled by the
818 .Sw -suppressdup
819 switch.)
820 .P
821 A variety of versions of the database library exist.
822 .[
823 wolter unix incompat notes dbm
824 .]
825 Complicated autoconf code was needed to detect them correctly.
826 Further more, the configure switches
827 .Sw --with-ndbm=ARG
828 and
829 .Sw --with-ndbmheader=ARG
830 were added to help with difficult setups that would
831 not be detected automatically or correctly.
832 .P
833 By removing the suppress duplicates feature of
834 .Pn slocal ,
835 the dependency on
836 .I ndbm
837 vanished and 120 lines of complex autoconf code could be saved.
838 .Ci ecd6d6a20cb7a1507e3a20d6c4cb3a1cf14c6bbf
839 The change removed functionality too, but that is minor to the
840 improvement by dropping the dependency and the complex autoconf code.
841 .\" XXX argument: slocal ist sowieso nicht teil vom mmh kern
843 .U3 "mh-e Support
844 .P
845 The configure option
846 .Sw --disable-mhe
847 was removed when the mh-e support was reworked.
848 Mh-e is the Emacs front-end to MH.
849 It requires MH to provide minor additional functions.
850 The
851 .Sw --disable-mhe
852 configure option could switch these extensions off.
853 After removing the support for old versions of mh-e,
854 only the
855 .Sw -build
856 switches of
857 .Pn forw
858 and
859 .Pn repl
860 are left to be mh-e extensions.
861 They are now always built in because they add little code and complexity.
862 In consequence, the
863 .Sw --disable-mhe
864 configure option was removed
865 .Ci a7ce7b4a580d77b6c2c4d980812beb589aa4c643
866 Removing the option removed a second code setup that would have
867 needed to be tested.
868 .\" XXX datum?
869 This change was first accomplished in nmh and thereafter merged into mmh.
870 .P
871 The interface changes in mmh require mh-e to be adjusted in order
872 to be able to use mmh as back-end.
873 This will require minor changes to mh-e, but removing the
874 .Sw -build
875 switches would require more rework.
877 .U3 "Masquerading
878 .P
879 The configure option
880 .Sw --enable-masquerade
881 could take up to three arguments:
882 `draft_from', `mmailid', and `username_extension'.
883 They activated different types of address masquerading.
884 All of them were implemented in the SMTP-speaking
885 .Pn post
886 command, which provided an MSA.
887 Address masquerading is an MTA's task and mmh does not cover
888 this field anymore.
889 Hence, true masquerading needs to be implemented in the external MTA.
890 .P
891 The
892 .I mmailid
893 masquerading type is the oldest one of the three and the only one
894 available in the original MH.
895 It provided a
896 .I username
897 to
898 .I fakeusername
899 mapping, based on the password file's GECOS field.
900 The man page
901 .Mp mh-tailor(5)
902 described the use case as being the following:
903 .QS
904 This is useful if you want the messages you send to always
905 appear to come from the name of an MTA alias rather than your
906 actual account name. For instance, many organizations set up
907 `First.Last' sendmail aliases for all users. If this is
908 the case, the GECOS field for each user should look like:
909 ``First [Middle] Last <First.Last>''
910 .QE
911 .P
912 As mmh sends outgoing mail via the local MTA only,
913 the best location to do such global rewrites is there.
914 Besides, the MTA is conceptionally the right location because it
915 does the reverse mapping for incoming mail (aliasing), too.
916 Further more, masquerading set up there is readily available for all
917 mail software on the system.
918 Hence, mmailid masquerading was removed.
919 .Ci 0836c8000ccb34b59410ef1c15b1b7feac70ce5f
920 .P
921 The
922 .I username_extension
923 masquerading type did not replace the username but would append a suffix,
924 specified by the
925 .Ev USERNAME_EXTENSION
926 environment variable, to it.
927 This provided support for the
928 .I user-extension
929 feature of qmail and the similar
930 .I "plussed user
931 processing of sendmail.
932 The decision to remove this username_extension masquerading was
933 motivated by the fact that
934 .Pn spost
935 had not supported it already.
936 .Ci 2abae0bfd0ad5bf898461e50aa4b466d641f23d9
937 Username extensions are possible in mmh, but less convenient to use.
938 .\" XXX covered by next paragraph
939 .\" XXX format file %(getenv USERNAME_EXTENSION)
940 .P
941 The
942 .I draft_from
943 masquerading type instructed
944 .Pn post
945 to use the value of the
946 .Hd From
947 header field as SMTP envelope sender.
948 Sender addresses could be replaced completely.
949 .Ci b14ea6073f77b4359aaf3fddd0e105989db9
950 Mmh offers a kind of masquerading similar in effect, but
951 with technical differences.
952 As mmh does not transfer messages itself, the local MTA has final control
953 over the sender's address. Any masquerading mmh introduces may be reverted
954 by the MTA.
955 In times of pedantic spam checking, an MTA will take care to use
956 sensible envelope sender addresses to keep its own reputation up.
957 Nonetheless, the MUA can set the
958 .Hd From
959 header field and thereby propose
960 a sender address to the MTA.
961 The MTA may then decide to take that one or generate the canonical sender
962 address for use as envelope sender address.
963 .P
964 In mmh, the MTA will always extract the recipient and sender from the
965 message header (\c
966 .Pn sendmail 's
967 .Sw -t
968 switch).
969 The
970 .Hd From
971 header field of the draft may be set arbitrary by the user.
972 If it is missing, the canonical sender address will be generated by the MTA.
974 .U3 "Remaining Options
975 .P
976 Two configure options remain in mmh.
977 One is the locking method to use:
978 .Sw --with-locking=[dot|fcntl|flock|lockf] .
979 The idea of removing all methods except the portable dot locking
980 and having that one as the default is appealing, but this change
981 requires deeper technical investigation into the topic.
982 The other option,
983 .Sw --enable-debug ,
984 compiles the programs with debugging symbols and does not strip them.
985 This option is likely to stay.
990 .H2 "Command Line Switches
991 .P
992 The command line switches of MH tools is similar to the X Window style.
993 .\" XXX ref
994 They are words, introduced by a single dash.
995 For example:
996 .Cl "-truncate" .
997 Every program in mmh has two generic switches:
998 .Sw -help ,
999 to print a short message on how to use the program, and
1000 .Sw -Version
1001 (with capital `V'), to tell what version of mmh the program belongs to.
1002 .P
1003 Switches change the behavior of programs.
1004 Programs that do one thing in one way require no switches.
1005 In most cases, doing something in exactly one way is too limiting.
1006 If there is basically one task to accomplish, but it should be done
1007 in various ways, switches are a good approach to alter the behavior
1008 of a program.
1009 Changing the behavior of programs provides flexibility and customization
1010 to users, but at the same time it complicates the code, documentation and
1011 usage of the program.
1012 .\" XXX: Ref
1013 Therefore, the number of switches should be kept small.
1014 A small set of well-chosen switches does no harm.
1015 But usually, the number of switches increases over time.
1016 Already in 1985, Rose and Romine have identified this as a major
1017 problem of MH:
1018 .[ [
1019 rose romine real work
1020 .], p. 12]
1021 .QS
1022 A complaint often heard about systems which undergo substantial development
1023 by many people over a number of years, is that more and more options are
1024 introduced which add little to the functionality but greatly increase the
1025 amount of information a user needs to know in order to get useful work done.
1026 This is usually referred to as creeping featurism.
1027 .QP
1028 Unfortunately MH, having undergone six years of off-and-on development by
1029 ten or so well-meaning programmers (the present authors included),
1030 suffers mightily from this.
1031 .QE
1032 .P
1033 Being reluctant to adding new switches \(en or `options',
1034 as Rose and Romine call them \(en is one part of a counter-action,
1035 the other part is removing hardly used switches.
1036 Nmh's tools had lots of switches already implemented,
1037 hence, cleaning up by removing some of them was the more important part
1038 of the counter-action.
1039 Removing existing functionality is always difficult because it
1040 breaks programs that use these functions.
1041 Also, for every obsolete feature, there'll always be someone who still
1042 uses it and thus opposes its removal.
1043 This puts the developer into the position,
1044 where sensible improvements to style are regarded as destructive acts.
1045 Yet, living with the featurism is far worse, in my eyes, because
1046 future needs will demand adding further features,
1047 worsening the situation more and more.
1048 Rose and Romine added in a footnote,
1049 ``[...]
1050 .Pn send
1051 will no doubt acquire an endless number of switches in the years to come.''
1052 Although clearly humorous, the comment points to the nature of the problem.
1053 Refusing to add any new switches would encounter the problem at its root,
1054 but this is not practical.
1055 New needs will require new switches and it would be unwise to block
1056 them strictly.
1057 Nevertheless, removing obsolete switches still is an effective approach
1058 to deal with the problem.
1059 Working on an experimental branch without an established user base,
1060 eased my work because I did not offend users when I removed existing
1061 functions.
1062 .P
1063 Rose and Romine counted 24 visible and 9 more hidden switches for
1064 .Pn send .
1065 In nmh, they increased up to 32 visible and 12 hidden ones.
1066 At the time of writing, no more than 7 visible switches and 1 hidden switch
1067 have remained in mmh's
1068 .Pn send .
1069 (These numbers include two generic switches, help and version.)
1070 .P
1071 The figure displays the number of switches for each of the tools
1072 that is available in both nmh and mmh.
1073 The tools are sorted by the number of switches they had in nmh.
1074 Visible and hidden switches were counted,
1075 but not the generic help and version switches.
1076 Whereas in the beginning of the project, the average tool had 11 switches,
1077 now it has no more than 5 \(en only half as many.
1078 If the `no' switches and similar inverse variant are folded onto
1079 their counter-parts, the average tool had 8 switches in pre-mmh times and
1080 has 4 now.
1081 The total number of functional switches in mmh dropped from 465
1082 to 234.
1084 .KS
1085 .in 1c
1086 .so input/switches.grap
1087 .KE
1089 .P
1090 A part of the switches vanished after functions were removed.
1091 This was the case for network mail transfer, for instance.
1092 Sometimes, however, the work flow was the other way:
1093 I looked through the
1094 .Mp mh-chart (7)
1095 man page to identify the tools with apparently too many switches.
1096 Then considering the value of each of the switches by examining
1097 the tool's man page and source code, aided by recherche and testing.
1098 This way, the removal of functions was suggested by the aim to reduce
1099 the number of switches per command.
1102 .U3 "Draft Folder Facility
1103 .P
1104 A change early in the project was the complete transition from
1105 the single draft message to the draft folder facility.
1106 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
1107 .\" XXX ref to section ...
1108 The draft folder facility was introduced in the mid-eighties, when
1109 Rose and Romine called it a ``relatively new feature''.
1110 .[
1111 rose romine real work
1112 .]
1113 Since then, the facility had existed but was inactive by default.
1114 The default activation and the related rework of the tools made it
1115 possible to remove the
1116 .Sw -[no]draftfolder ,
1117 and
1118 .Sw -draftmessage
1119 switches from
1120 .Pn comp ,
1121 .Pn repl ,
1122 .Pn forw ,
1123 .Pn dist ,
1124 .Pn whatnow ,
1125 and
1126 .Pn send .
1127 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
1128 The only flexibility removed with this change is having multiple
1129 draft folders within one profile.
1130 I consider this a theoretical problem only.
1131 At the same time, the
1132 .Sw -draft
1133 switch of
1134 .Pn anno ,
1135 .Pn refile ,
1136 and
1137 .Pn send
1138 was removed.
1139 The special treatment of \fIthe\fP draft message became irrelevant after
1140 the rework of the draft system.
1141 (cf. Sec.
1142 .Cf draft-folder )
1143 Furthermore,
1144 .Pn comp
1145 no longer needs a
1146 .Sw -file
1147 switch as the draft folder facility together with the
1148 .Sw -form
1149 switch are sufficient.
1152 .U3 "In Place Editing
1153 .P
1154 .Pn anno
1155 had the switches
1156 .Sw -[no]inplace
1157 to either annotate the message in place and thus preserve hard links,
1158 or annotate a copy to replace the original message, breaking hard links.
1159 Following the assumption that linked messages should truly be the
1160 same message, and annotating it should not break the link, the
1161 .Sw -[no]inplace
1162 switches were removed and the previous default
1163 .Sw -inplace
1164 was made the only behavior.
1165 .Ci c8195849d2e366c569271abb0f5f60f4ebf0b4d0
1166 The
1167 .Sw -[no]inplace
1168 switches of
1169 .Pn repl ,
1170 .Pn forw ,
1171 and
1172 .Pn dist
1173 could be removed, too, as they were simply passed through to
1174 .Pn anno .
1175 .P
1176 .Pn burst
1177 also had
1178 .Sw -[no]inplace
1179 switches, but with different meaning.
1180 With
1181 .Sw -inplace ,
1182 the digest had been replaced by the table of contents (i.e. the
1183 introduction text) and the burst messages were placed right
1184 after this message, renumbering all following messages.
1185 Also, any trailing text of the digest was lost, though,
1186 in practice, it usually consists of an end-of-digest marker only.
1187 Nontheless, this behavior appeared less elegant than the
1188 .Sw -noinplace
1189 behavior, which already had been the default.
1190 Nmh's
1191 .Mp burst (1)
1192 man page reads:
1193 .QS
1194 If
1195 .Sw -noinplace
1196 is given, each digest is preserved, no table
1197 of contents is produced, and the messages contained within
1198 the digest are placed at the end of the folder. Other messages
1199 are not tampered with in any way.
1200 .QE
1201 .LP
1202 The decision to drop the
1203 .Sw -inplace
1204 behavior was supported by the code complexity and the possible data loss
1205 it caused.
1206 .Sw -noinplace
1207 was chosen to be the definitive behavior.
1208 .Ci 68a686adeb39223a5e1ad35e4a24890ec053679d
1211 .U3 "Forms and Format Strings
1212 .P
1213 Historically, the tools that had
1214 .Sw -form
1215 switches to supply a form file had
1216 .Sw -format
1217 switches as well to supply the contents of a form file as a string
1218 on the command line directly.
1219 In consequence, the following two lines equaled:
1220 .VS
1221 scan -form scan.mailx
1222 scan -format "`cat .../scan.mailx`"
1223 VE
1224 The
1225 .Sw -format
1226 switches were dropped in favor for extending the
1227 .Sw -form
1228 switches.
1229 .Ci f51956be123db66b00138f80464d06f030dbb88d
1230 If their argument starts with an equal sign (`='),
1231 then the rest of the argument is taken as a format string,
1232 otherwise the arguments is treated as the name of a format file.
1233 Thus, now the following two lines equal:
1234 .VS
1235 scan -form scan.mailx
1236 scan -form "=`cat .../scan.mailx`"
1237 VE
1238 This rework removed the prefix collision between
1239 .Sw -form
1240 and
1241 .Sw -format .
1242 Now, typing
1243 .Sw -fo
1244 suffices to specify form or format string.
1245 .P
1246 The different meaning of
1247 .Sw -format
1248 for
1249 .Pn repl
1250 and
1251 .Pn forw
1252 was removed in mmh.
1253 .Pn forw
1254 was completely switched to MIME-type forwarding, thus removing the
1255 .Sw -[no]format .
1256 .Ci 6e271608b7b9c23771523f88d23a4d3593010cf1
1257 For
1258 .Pn repl ,
1259 the
1260 .Sw -[no]format
1261 switches were reworked to
1262 .Sw -[no]filter
1263 switches.
1264 .Ci 67411b1f95d6ec987b4c732459e1ba8a8ac192c6
1265 The
1266 .Sw -format
1267 switches of
1268 .Pn send
1269 and
1270 .Pn post ,
1271 which had a third meaning,
1272 were removed likewise.
1273 .Ci f3cb7cde0e6f10451b6848678d95860d512224b9
1274 Eventually, the ambiguity of the
1275 .Sw -format
1276 switches was resolved by not anymore having any such switch in mmh.
1279 .U3 "MIME Tools
1280 .P
1281 The MIME tools, which were once part of
1282 .Pn mhn
1283 .\" XXX
1284 (whatever that stood for),
1285 had several switches that added little practical value to the programs.
1286 The
1287 .Sw -[no]realsize
1288 switches of
1289 .Pn mhbuild
1290 and
1291 .Pn mhlist
1292 were removed, doing real size calculations always now
1293 .Ci 8d8f1c3abc586c005c904e52c4adbfe694d2201c ,
1294 as nmh's
1295 .Mp mhbuild (1)
1296 man page states
1297 ``This provides an accurate count at the expense of a small delay.''
1298 This small delay is not noticable on modern systems.
1299 .P
1300 The
1301 .Sw -[no]check
1302 switches were removed together with the support for
1303 .Hd Content-MD5
1304 header fields.
1305 .[
1306 rfc 1864
1307 .]
1308 .Ci 31dc797eb5178970d68962ca8939da3fd9a8efda
1309 (cf. Sec.
1310 .Cf content-md5 )
1311 .P
1312 The
1313 .Sw -[no]ebcdicsafe
1314 and
1315 .Sw -[no]rfc934mode
1316 switches of
1317 .Pn mhbuild
1318 were removed because they are considered obsolete.
1319 .Ci 01a3480928da485b4d6109d36d751dfa71799d58
1320 .Ci 3363e2624dce0eb8164cf8b3f1ab385c8ff72e88
1321 .P
1322 Content caching of external MIME parts, activated with the
1323 .Sw -rcache
1324 and
1325 .Sw -wcache
1326 switches was completely removed.
1327 .Ci d1fefd9f614e4dc3cda16da6c69133c1b2005269
1328 External MIME parts are rare today, having a caching facility
1329 for them appears to be unnecessary.
1330 .P
1331 In pre-MIME times,
1332 .Pn mhl
1333 had covered many tasks that are part of MIME handling today.
1334 Therefore,
1335 .Pn mhl
1336 could be simplified to a large extend, reducing the number of its
1337 switches from 21 to 6.
1338 .Ci 350ad6d3542a07639213cf2a4fe524e829c1e7b6
1339 .Ci 0e46503be3c855bddaeae3843e1b659279c35d70
1344 .U3 "Header Printing
1345 .P
1346 .Pn folder 's
1347 data output is self-explaining enough that
1348 displaying the header line makes little sense.
1349 Hence, the
1350 .Sw -[no]header
1351 switch was removed and headers are never printed.
1352 .Ci 601cc73d1fa05ce96faa728f036d6c51b91701c7
1353 .P
1354 In
1355 .Pn mhlist ,
1356 the
1357 .Sw -[no]header
1358 switches were removed, too.
1359 .Ci b24f96523aaf60e44e04a3ffb1d22e69a13a602f
1360 But in this case headers are always printed,
1361 because the output is not self-explaining.
1362 .P
1363 .Pn scan
1364 also had
1365 .Sw -[no]header
1366 switches.
1367 Printing the header had been sensible until the introduction of
1368 format strings made it impossible to display the column headings.
1369 Only the folder name and the current date remained to be printed.
1370 As this information can be perfectly retrieved by
1371 .Pn folder
1372 and
1373 .Pn date ,
1374 consequently, the switches were removed.
1375 .Ci c477dc5d1d03fa6d9a8ab3dd3508c63cbddc044e
1376 .P
1377 By removing all
1378 .Sw -header
1379 switches, the collision with
1380 .Sw -help
1381 on the first two letters was resolved.
1382 Currently,
1383 .Sw -h
1384 evaluates to
1385 .Sw -help
1386 for all tools of mmh.
1389 .U3 "Suppressing Edits or the Invocation of the WhatNow Shell
1390 .P
1391 The
1392 .Sw -noedit
1393 switch of
1394 .Pn comp ,
1395 .Pn repl ,
1396 .Pn forw ,
1397 .Pn dist ,
1398 and
1399 .Pn whatnow
1400 was removed, but it can now be replaced by specifying
1401 .Sw -editor
1402 with an empty argument.
1403 .Ci 75fca31a5b9d5c1a99c74ab14c94438d8852fba9
1404 (Specifying
1405 .Cl "-editor /bin/true
1406 is nearly the same, only differing by the previous editor being set.)
1407 .P
1408 The more important change is the removal of the
1409 .Sw -nowhatnowproc
1410 switch.
1411 .Ci ee4f43cf2ef0084ec698e4e87159a94c01940622
1412 This switch had introduced an awkward behavior, as explained in nmh's
1413 man page for
1414 .Mp comp (1):
1415 .QS
1416 The
1417 .Sw -editor
1418 .Ar editor
1419 switch indicates the editor to use for
1420 the initial edit. Upon exiting from the editor,
1421 .Pn comp
1422 will invoke the
1423 .Pn whatnow
1424 program. See
1425 .Mp whatnow (1)
1426 for a discussion of available options.
1427 The invocation of this program can be
1428 inhibited by using the
1429 .Sw -nowhatnowproc
1430 switch. (In truth of fact, it is the
1431 .Pn whatnow
1432 program which starts the initial edit.
1433 Hence,
1434 .Sw -nowhatnowproc
1435 will prevent any edit from occurring.)
1436 .QE
1437 .P
1438 Effectively, the
1439 .Sw -nowhatnowproc
1440 switch creates only a draft message.
1441 As
1442 .Cl "-whatnowproc /bin/true
1443 causes the same behavior, the
1444 .Sw -nowhatnowproc
1445 switch was removed for being redundant.
1446 Likely, the
1447 .Sw -nowhatnowproc
1448 switch was intended to be used by front-ends.
1452 .U3 "Various
1453 .BU
1454 With the removal of MMDF maildrop format support,
1455 .Pn packf
1456 and
1457 .Pn rcvpack
1458 no longer needed their
1459 .Sw -mbox
1460 and
1461 .Sw -mmdf
1462 switches.
1463 .Sw -mbox
1464 is the sole behavior now.
1465 .Ci 3916ab66ad5d183705ac12357621ea8661afd3c0
1466 Further rework in both tools made the
1467 .Sw -file
1468 switch unnecessary.
1469 .Ci ca1023716d4c2ab890696f3e41fa0d94267a940e
1471 .BU
1472 Mmh's tools will no longer clear the screen (\c
1473 .Pn scan 's
1474 and
1475 .Pn mhl 's
1476 .Sw -[no]clear
1477 switches
1478 .Ci e57b17343dcb3ff373ef4dd089fbe778f0c7c270
1479 .Ci 943765e7ac5693ae177fd8d2b5a2440e53ce816e ).
1480 Neither will
1481 .Pn mhl
1482 ring the bell (\c
1483 .Sw -[no]bell
1484 .Ci e11983f44e59d8de236affa5b0d0d3067c192e24 )
1485 nor page the output itself (\c
1486 .Sw -length
1487 .Ci 5b9d883db0318ed2b84bb82dee880d7381f99188 ).
1488 .\" XXX Ref
1489 Generally, the pager to use is no longer specified with the
1490 .Sw -[no]moreproc
1491 command line switches for
1492 .Pn mhl
1493 and
1494 .Pn show /\c
1495 .Pn mhshow .
1496 .Ci 39e87a75b5c2d3572ec72e717720b44af291e88a
1498 .BU
1499 In order to avoid prefix collisions among switch names, the
1500 .Sw -version
1501 switch was renamed to
1502 .Sw -Version
1503 (with capital `V').
1504 .Ci 32b2354dbaf4bf934936eb5b102a4a3d2fdd209a
1505 Every program has the
1506 .Sw -version
1507 switch but its first three letters collided with the
1508 .Sw -verbose
1509 switch, present in many programs.
1510 The rename solved this problem once for all.
1511 Although this rename breaks a basic interface, having the
1512 .Sw -V
1513 abbreviation to display the version information, isn't all too bad.
1515 .BU
1516 .Sw -[no]preserve
1517 of
1518 .Pn refile
1519 was removed
1520 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
1521 because what use was it anyway?
1522 Quoting nmh's man page
1523 .Mp refile (1):
1524 .QS
1525 Normally when a message is refiled, for each destination
1526 folder it is assigned the number which is one above the current
1527 highest message number in that folder. Use of the
1528 .Sw -preserv
1529 [sic!] switch will override this message renaming, and try
1530 to preserve the number of the message. If a conflict for a
1531 particular folder occurs when using the
1532 .Sw -preserve
1533 switch, then
1534 .Pn refile
1535 will use the next available message number which
1536 is above the message number you wish to preserve.
1537 .QE
1539 .BU
1540 The removal of the
1541 .Sw -[no]reverse
1542 switches of
1543 .Pn scan
1544 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
1545 is a bug fix, supported by the comments
1546 ``\-[no]reverse under #ifdef BERK (I really HATE this)''
1547 by Rose and
1548 ``Lists messages in reverse order with the `\-reverse' switch.
1549 This should be considered a bug.'' by Romine in the documentation.
1550 .\" XXX Ref: welche datei genau.
1551 The question remains why neither Rose and Romine had fixed this
1552 bug in the eighties when they wrote these comments nor has anyone
1553 thereafter.
1556 .ig
1558 forw: [no]dashstuffing(mhl)
1560 mhshow: [no]pause [no]serialonly
1562 mhmail: resent queued
1563 inc: snoop, (pop)
1565 mhl: [no]faceproc folder sleep
1566 [no]dashstuffing(forw) digest list volume number issue number
1568 prompter: [no]doteof
1570 refile: [no]preserve [no]unlink [no]rmmproc
1572 send: [no]forward [no]mime [no]msgid
1573 [no]push split [no]unique (sasl) width snoop [no]dashstuffing
1574 attach attachformat
1575 whatnow: (noedit) attach
1577 slocal: [no]suppressdups
1579 spost: [no]filter [no]backup width [no]push idanno
1580 [no]check(whom) whom(whom)
1582 whom: ???
1584 ..
1587 .ig
1589 .P
1590 In the best case, all switches are unambiguous on the first character,
1591 or on the three-letter prefix for the `no' variants.
1592 Reducing switch prefix collisions, shortens the necessary prefix length
1593 the user must type.
1594 Having less switches helps best.
1596 ..
1599 .\" XXX: whatnow prompt commands
1604 .\" --------------------------------------------------------------
1605 .H1 "Modernizing
1606 .P
1607 In the more than thirty years of MH's existence, its code base was
1608 increasingly extended.
1609 New features entered the project and became alternatives to the
1610 existing behavior.
1611 Relicts from several decades have gathered in the code base,
1612 but seldom obsolete features were dropped.
1613 This section describes the removing of old code
1614 and the modernizing of the default setup.
1615 It focuses on the functional aspect only;
1616 the non-functional aspects of code style are discussed in Sec.
1617 .Cf code-style .
1620 .H2 "Code Relicts
1621 .P
1622 My position regarding the removal of obsolete functions of mmh,
1623 .\" XXX ``in order to remove old code,''
1624 is much more revolutional than the nmh community appreciates.
1625 Working on an experimental version, I was quickly able to drop
1626 functionality I considered ancient.
1627 The need for consensus with peers would have slowed this process down.
1628 Without the need to justify my decisions, I was able to rush forward.
1629 In December 2011, Paul Vixie motivated the nmh developers to just
1630 .\" XXX ugs
1631 do the work:
1632 .[
1633 paul vixie edginess nmh-workers
1634 .]
1635 .QS
1636 let's stop walking on egg shells with this code base. there's no need to
1637 discuss whether to keep using vfork, just note in [sic!] passing, [...]
1638 we don't need a separate branch for removing vmh
1639 or ridding ourselves of #ifdef's or removing posix replacement functions
1640 or depending on pure ansi/posix ``libc''.
1641 .QP
1642 these things should each be a day or two of work and the ``main branch''
1643 should just be modern. [...]
1644 let's push forward, aggressively.
1645 .QE
1646 .LP
1647 I did so already in the months before.
1648 I pushed forward.
1649 .\" XXX semicolon ?
1650 I simply dropped the cruft.
1651 .P
1652 The decision to drop a feature was based on literature research and
1653 careful thinking, but whether having had contact with this particular
1654 feature within my own computer life served as a rule of thumb.
1655 I explained my reasons in the commit messages
1656 in the version control system.
1657 Hence, others can comprehend my view and argue for undoing the change
1658 if I have missed an important aspect.
1659 I was quick in dropping parts.
1660 I rather include falsely dropped parts again, than going at a slower pace.
1661 Mmh is experimental work; it requires tough decisions.
1662 .\" XXX ``exp. work'' schon oft gesagt
1665 .U3 "Forking
1666 .P
1667 Being a tool chest, MH creates many processes.
1668 In earlier times
1669 .Fu fork()
1670 had been an expensive system call, because the process's image needed
1671 to be completely duplicated at once.
1672 This expensive work was especially unnecessary in the commonly occuring
1673 case wherein the image is replaced by a call to
1674 .Fu exec()
1675 right after having forked the child process.
1676 The
1677 .Fu vfork()
1678 system call was invented to speed up this particular case.
1679 It completely omits the duplication of the image.
1680 On old systems this resulted in significant speed ups.
1681 Therefore MH used
1682 .Fu vfork()
1683 whenever possible.
1684 .P
1685 Modern memory management units support copy-on-write semantics, which make
1686 .Fu fork()
1687 almost as fast as
1688 .Fu vfork() .
1689 The man page of
1690 .Mp vfork (2)
1691 in FreeBSD 8.0 states:
1692 .QS
1693 This system call will be eliminated when proper system sharing mechanisms
1694 are implemented. Users should not depend on the memory sharing semantics
1695 of vfork() as it will, in that case, be made synonymous to fork(2).
1696 .QE
1697 .LP
1698 Vixie supports the removal with the note that ``the last
1699 system on which fork was so slow that an mh user would notice it, was
1700 Eunice. that was 1987''.
1701 .[
1702 nmh-workers vixie edginess
1703 .]
1704 I replaced all calls to
1705 .Fu vfork()
1706 with calls to
1707 .Fu fork() .
1708 .Ci 40821f5c1316e9205a08375e7075909cc9968e7d
1709 .P
1710 Related to the costs of
1711 .Fu fork()
1712 is the probability of its success.
1713 In the eighties, on heavy loaded systems, calls to
1714 .Fu fork()
1715 were prone to failure.
1716 Hence, many of the
1717 .Fu fork()
1718 calls in the code were wrapped into loops to retry the
1719 .Fu fork()
1720 several times, to increase the chances to succeed, eventually.
1721 On modern systems, a failing
1722 .Fu fork()
1723 call is unusual.
1724 Hence, in the rare case when
1725 .Fu fork()
1726 fails, mmh programs simply abort.
1727 .Ci 5fbf37ee68e018998ada61eeab73e035b26834b6
1730 .U3 "Header Fields
1731 .BU
1732 The
1733 .Hd Encrypted
1734 header field was introduced by RFC\|822,
1735 but already marked as legacy in RFC\|2822.
1736 Today, OpenPGP provides the basis for standardized exchange of encrypted
1737 messages [RFC\|4880, RFC\|3156].
1738 Hence, the support for
1739 .Hd Encrypted
1740 header fields is removed in mmh.
1741 .Ci 064527f7b57ab050e5af13e15ad99aeeab125857
1742 .BU
1743 The native support for
1744 .Hd Face
1745 header fields has been removed, as well.
1746 .Ci 8e5be81f784682822f5e868c1bf3c8624682bd23
1747 This feature is similar to the
1748 .Hd X-Face
1749 header field in its intent,
1750 but takes a different approach to store the image.
1751 Instead of encoding the image data directly into the header field,
1752 it contains the hostname and UDP port where the image
1753 date can be retrieved.
1754 There is even a third Face system,
1755 which is the successor of
1756 .Hd X-Face ,
1757 although it re-uses the
1758 .Hd Face
1759 header field.
1760 It was invented in 2005 and supports colored PNG images.
1761 None of the Face systems described here is popular today.
1762 Hence, mmh has no direct support for them.
1763 .BU
1764 .Id content-md5
1765 The
1766 .Hd Content-MD5
1767 header field was introduced by RFC\|1864.
1768 It provides detection of data corruption during the transfer.
1769 But it can not ensure verbatim end-to-end delivery of the contents
1770 [RFC\|1864].
1771 The proper approach to verify content integrity in an
1772 end-to-end relationship is the use of digital signatures.
1773 .\" XXX (RFCs FIXME).
1774 On the other hand, transfer protocols should detect corruption during
1775 the transmission.
1776 The TCP includes a checksum field therefore.
1777 These two approaches in combinations render the
1778 .Hd Content-MD5
1779 header field superfluous.
1780 Not a single one out of 4\|200 messages from two decades
1781 in an nmh-workers mailing list archive contains a
1782 .Hd Content-MD5
1783 header field.
1784 Neither did any of the 60\|000 messages in my personal mail storage.
1785 Removing the support for this header field,
1786 removed the last place where MD5 computation was needed.
1787 .Ci 31dc797eb5178970d68962ca8939da3fd9a8efda
1788 Hence, the MD5 code could be removed as well.
1789 Over 500 lines of code vanished by this one change.
1792 .U3 "MMDF maildrop support
1793 .P
1794 This type of format is conceptionally similar to the mbox format,
1795 but uses a different message delimiter (`\fL\\1\\1\\1\\1\fP',
1796 commonly written as `\fL^A^A^A^A\fP', instead of `\fLFrom\0\fP').
1797 Mbox is the de-facto standard maildrop format on Unix,
1798 whereas the MMDF maildrop format is now forgotten.
1799 By dropping the MMDF maildrop format support,
1800 mbox became the only packed mailbox format supported in mmh.
1801 .P
1802 The simplifications within the code were moderate.
1803 Mainly, the reading and writing of MMDF mailbox files was removed.
1804 But also, switches of
1805 .Pn packf
1806 and
1807 .Pn rcvpack
1808 could be removed.
1809 .Ci 3916ab66ad5d183705ac12357621ea8661afd3c0
1810 In the message parsing function
1811 .Fn sbr/m_getfld.c ,
1812 knowledge of MMDF packed mail boxes was removed.
1813 .Ci 684ec30d81e1223a282764452f4902ed4ad1c754
1814 Further code structure simplifications may be possible there,
1815 because only one single packed mailbox format is left to be supported.
1816 I have not worked on them yet because
1817 .Fu m_getfld()
1818 is heavily optimized and thus dangerous to touch.
1819 The risk of damaging the intricate workings of the optimized code is
1820 too high.
1823 .U3 "Prompter's Control Keys
1824 .P
1825 The program
1826 .Pn prompter
1827 queries the user to fill in a message form.
1828 When used by
1829 .Pn comp
1830 as
1831 .Cl "comp -editor prompter" ,
1832 the resulting behavior is similar to
1833 .Pn mailx .
1834 Apparently,
1835 .Pn prompter
1836 had not been touched lately.
1837 Otherwise it's hardly explainable why it
1838 still offered the switches
1839 .Sw -erase
1840 .Ar chr
1841 and
1842 .Sw -kill
1843 .Ar chr
1844 to name the characters for command line editing.
1845 The times when this had been necessary are long time gone.
1846 Today these things work out-of-the-box, and if not, are configured
1847 with the standard tool
1848 .Pn stty .
1849 The switches are removed now
1850 .Ci 0bd9750710cdbab80cfb4036dd87af20afe1552f .
1853 .U3 "Hardcopy Terminal Support
1854 .P
1855 More of a funny anecdote is a check for being connected to a
1856 hardcopy terminal.
1857 It remained in the code until spring 2012, when I finally removed it
1858 .Ci b7764c4a6b71d37918a97594d866258f154017ca .
1859 .P
1860 The check only prevented a pager to be placed between the printing
1861 program (\c
1862 .Pn mhl )
1863 and the terminal.
1864 In nmh, this could have been ensured statically with the
1865 .Sw -nomoreproc
1866 at the command line, too.
1867 In mmh, setting the profile entry
1868 .Pe Pager
1869 or the environment variable
1870 .Ev PAGER
1871 to
1872 .Pn cat
1873 is sufficient.
1878 .H2 "Attachments
1879 .P
1880 The mind model of email attachments is unrelated to MIME.
1881 Although the MIME RFCs (2045 through 2049) define the technical
1882 requirements for having attachments, they do not mention the word
1883 ``attachment''.
1884 Instead of attachments, MIME talks about ``multi-part message bodies''
1885 [RFC\|2045], a more general concept.
1886 Multi-part messages are messages
1887 ``in which one or more different
1888 sets of data are combined in a single body''
1889 [RFC\|2046].
1890 MIME keeps its descriptions generic;
1891 it does not imply specific usage models.
1892 One usage model became prevalent: attachments.
1893 The idea is having a main text document with files of arbitrary kind
1894 attached to it.
1895 In MIME terms, this is a multi-part message having a text part first
1896 and parts of arbitrary type following.
1897 .P
1898 MH's MIME support is a direct implementation of the RFCs.
1899 The perception of the topic described in the RFCs is clearly visible
1900 in MH's implementation.
1901 .\" XXX rewrite ``no idea''.
1902 As a result,
1903 MH had all the MIME features but no idea of attachments.
1904 But users do not need all the MIME features,
1905 they want convenient attachment handling.
1908 .U3 "Composing MIME Messages
1909 .P
1910 In order to improve the situation on the message composing side,
1911 Jon Steinhart had added an attachment system to nmh in 2002.
1912 .Ci 7480dbc14bc90f2d872d434205c0784704213252
1913 In the file
1914 .Fn docs/README-ATTACHMENTS ,
1915 he described his motivation to do so as such:
1916 .QS
1917 Although nmh contains the necessary functionality for MIME message
1918 handing [sic!], the interface to this functionality is pretty obtuse.
1919 There's no way that I'm ever going to convince my partner to write
1920 .Pn mhbuild
1921 composition files!
1922 .QE
1923 .LP
1924 With this change, the mind model of attachments entered nmh.
1925 In the same document:
1926 .QS
1927 These changes simplify the task of managing attachments on draft files.
1928 They allow attachments to be added, listed, and deleted.
1929 MIME messages are automatically created when drafts with attachments
1930 are sent.
1931 .QE
1932 .LP
1933 Unfortunately, the attachment system,
1934 like any new facilities in nmh,
1935 was inactive by default.
1936 .P
1937 During my work in Argentina, I tried to improve the attachment system.
1938 But, because of great opposition in the nmh community,
1939 my patch died as a proposal on the mailing list, after long discussions.
1940 .[
1941 nmh-workers attachment proposal
1942 .]
1943 In January 2012, I extended the patch and applied it to mmh.
1944 .Ci 8ff284ff9167eff8f5349481529332d59ed913b1
1945 In mmh, the attachment system is active by default.
1946 Instead of command line switches, the
1947 .Pe Attachment-Header
1948 profile entry is used to specify
1949 the name of the attachment header field.
1950 It is pre-defined to
1951 .Hd Attach .
1952 .P
1953 To add an attachment to a draft, a header line needs to be added:
1954 .VS
1955 To: bob
1956 Subject: The file you wanted
1957 Attach: /path/to/the/file-bob-wanted
1958 --------
1959 Here it is.
1960 VE
1961 The header field can be added to the draft manually in the editor,
1962 or by using the `attach' command at the WhatNow prompt, or
1963 non-interactively with
1964 .Pn anno :
1965 .VS
1966 anno -append -nodate -component Attach -text /path/to/attachment
1967 VE
1968 Drafts with attachment headers are converted to MIME automatically by
1969 .Pn send .
1970 The conversion to MIME is invisible to the user.
1971 The draft stored in the draft folder is always in source form with
1972 attachment headers.
1973 If the MIMEification fails (e.g. because the file to attach
1974 is not accessible) the original draft is not changed.
1975 .P
1976 The attachment system handles the forwarding of messages, too.
1977 If the attachment header value starts with a plus character (`\fL+\fP'),
1978 like in
1979 .Cl "Attach: +bob 30 42" ,
1980 the given messages in the specified folder will be attached.
1981 This allowed to simplify
1982 .Pn forw .
1983 .Ci f41f04cf4ceca7355232cf7413e59afafccc9550
1984 .P
1985 Closely related to attachments is non-ASCII text content,
1986 because it requires MIME too.
1987 In nmh, the user needed to call `mime' at the WhatNow prompt
1988 to have the draft converted to MIME.
1989 This was necessary whenever the draft contained non-ASCII characters.
1990 If the user did not call `mime', a broken message would be sent.
1991 Therefore, the
1992 .Pe automimeproc
1993 profile entry could be specified to have the `mime' command invoked
1994 automatically each time.
1995 Unfortunately, this approach conflicted with the attachment system
1996 because the draft would already be in MIME format at the time
1997 when the attachment system wanted to MIMEify it.
1998 To use nmh's attachment system, `mime' must not be called at the
1999 WhatNow prompt and
2000 .Pe automimeproc
2001 must not be set in the profile.
2002 But then the case of non-ASCII text without attachment headers was
2003 not caught.
2004 All in all, the solution was complex and irritating.
2005 My patch from December 2010
2006 .[
2007 nmh-workers attachment proposal
2008 .]
2009 would have simplified the situation.
2010 .P
2011 Mmh's current solution is even more elaborate.
2012 Any necessary MIMEification is done automatically.
2013 There is no `mime' command at the WhatNow prompt anymore.
2014 The draft will be converted automatically to MIME when either an
2015 attachment header or non-ASCII text is present.
2016 Furthermore, the hash character (`\fL#\fP') is not special any more
2017 at line beginnings in the draft message.
2018 .\" XXX REF ?
2019 Users need not concern themselves with the whole topic at all.
2020 .P
2021 Although the new approach does not anymore support arbitrary MIME
2022 compositions directly, the full power of
2023 .Pn mhbuild
2024 can still be accessed.
2025 Given no attachment headers are included, the user can create
2026 .Pn mhbuild
2027 composition drafts like in nmh.
2028 Then, at the WhatNow prompt, he needs to invoke
2029 .Cl "edit mhbuild
2030 to convert it to MIME.
2031 Because the resulting draft does neither contain non-ASCII characters
2032 nor has it attachment headers, the attachment system will not touch it.
2033 .P
2034 The approach taken in mmh is tailored towards today's most common case:
2035 a text part, possibly with attachments.
2036 This case was simplified.
2039 .U3 "MIME Type Guessing
2040 .P
2041 From the programmer's point of view, the use of
2042 .Pn mhbuild
2043 composition drafts had one notable advantage over attachment headers:
2044 The user provides the appropriate MIME types for files to include.
2045 The attachment system needs to find out the correct MIME type itself.
2046 This is a difficult task, yet it spares the user irritating work.
2047 Determining the correct MIME type of content is partly mechanical,
2048 partly intelligent work.
2049 Forcing the user to find out the correct MIME type,
2050 forces him to do partly mechanical work.
2051 Letting the computer do the work can lead to bad choices for difficult
2052 content.
2053 For mmh, the latter option was chosen.
2054 .P
2055 Determining the MIME type by the suffix of the file name is a dumb
2056 approach, yet it is simple to implement and provides good results
2057 for the common cases.
2058 Mmh implements this approach in the
2059 .Pn print-mimetype
2060 script.
2061 .Ci 4b5944268ea0da7bb30598a27857304758ea9b44
2062 Using it is the default choice.
2063 .P
2064 A far better, though less portable, approach is the use of
2065 .Pn file .
2066 This standard tool tries to determine the type of files.
2067 Unfortunately, its capabilities and accuracy varies from system to system.
2068 Additionally, its output was only intended for human beings,
2069 but not to be used by programs.
2070 It varies much.
2071 Nevertheless, modern versions of GNU
2072 .Pn file ,
2073 which is prevalent on the popular GNU/Linux systems,
2074 provide MIME type output in machine-readable form.
2075 Although this solution is highly system-dependent,
2076 it solves the difficult problem well.
2077 On systems where GNU
2078 .Pn file ,
2079 version 5.04 or higher, is available it should be used.
2080 One needs to specify the following profile entry to do so:
2081 .Ci 3baec236a39c5c89a9bda8dbd988d643a21decc6
2082 .VS
2083 Mime-Type-Query: file -b --mime
2084 VE
2085 .LP
2086 Other versions of
2087 .Pn file
2088 might possibly be usable with wrapper scripts to reformat the output.
2089 The diversity among
2090 .Pn file
2091 implementations is great; one needs to check the local variant.
2092 .P
2093 If no MIME type can be determined, text content gets sent as
2094 `text/plain' and anything else under the generic fall-back type
2095 `application/octet-stream'.
2096 It is not possible in mmh to override the automatic MIME type guessing
2097 for a specific file.
2098 To do so, either the user would need to know in advance for which file
2099 the automatic guessing fails, or the system would require interaction.
2100 I consider both cases impractical.
2101 The existing solution should be sufficient.
2102 If not, the user may always fall back to
2103 .Pn mhbuild
2104 composition drafts and ignore the attachment system.
2107 .U3 "Storing Attachments
2108 .P
2109 Extracting MIME parts of a message and storing them to disk is performed by
2110 .Pn mhstore .
2111 The program has two operation modes,
2112 .Sw -auto
2113 and
2114 .Sw -noauto .
2115 With the former one, each part is stored under the filename given in the
2116 MIME part's meta information, if available.
2117 This naming information is usually available for modern attachments.
2118 If no filename is available, this MIME part is stored as if
2119 .Sw -noauto
2120 would have been specified.
2121 In the
2122 .Sw -noauto
2123 mode, the parts are processed according to rules, defined by
2124 .Pe mhstore-store-*
2125 profile entries.
2126 These rules define generic filename templates for storing
2127 or commands to post-process the contents in arbitrary ways.
2128 If no matching rule is available the part is stored under a generic
2129 filename, built from message number, MIME part number, and MIME type.
2130 .P
2131 The
2132 .Sw -noauto
2133 mode had been the default in nmh because it was considered safe,
2134 in contrast to the
2135 .Sw -auto
2136 mode.
2137 In mmh,
2138 .Sw -auto
2139 is not dangerous anymore.
2140 Two changes were necessary:
2141 .LI 1
2142 Any directory path is removed from the proposed filename.
2143 Thus, the files are always stored in the expected directory.
2144 .Ci 41b6eadbcecf63c9a66aa5e582011987494abefb
2145 .LI 2
2146 Tar files are not extracted automatically any more.
2147 Thus, the rest of the file system will not be touched.
2148 .Ci 94c80042eae3383c812d9552089953f9846b1bb6
2149 .LP
2150 Now, the outcome of mmh's
2151 .Cl "mhstore -auto
2152 can be foreseen from the output of
2153 .Cl "mhlist -verbose" .
2154 .P
2155 The
2156 .Sw -noauto
2157 mode is seen to be more powerful but less convenient.
2158 On the other hand,
2159 .Sw -auto
2160 is safe now and
2161 storing attachments under their original name is intuitive.
2162 Hence,
2163 .Sw -auto
2164 serves better as the default option.
2165 .Ci 3410b680416c49a7617491af38bc1929855a331d
2166 .P
2167 Files are stored into the directory given by the
2168 .Pe Nmh-Storage
2169 profile entry, if set, or
2170 into the current working directory, otherwise.
2171 Storing to different directories is only possible with
2172 .Pe mhstore-store-*
2173 profile entries.
2174 .P
2175 Still, in both modes, existing files get overwritten silently.
2176 This can be considered a bug.
2177 Yet, each other behavior has its draw-backs, too.
2178 Refusing to replace files requires adding a
2179 .Sw -force
2180 option.
2181 Users will likely need to invoke
2182 .Pn mhstore
2183 a second time with
2184 .Sw -force .
2185 Eventually, only the user can decide in the specific case.
2186 This requires interaction, which I like to avoid if possible.
2187 Appending a unique suffix to the filename is another bad option.
2188 For now, the behavior remains as it is.
2189 .P
2190 In mmh, only MIME parts of type message are special in
2191 .Pn mhstore 's
2192 .Sw -auto
2193 mode.
2194 Instead of storing message/rfc822 parts as files to disk,
2195 they are stored as messages into the current mail folder.
2196 The same applies to message/partial, although the parts are
2197 automatically reassembled beforehand.
2198 MIME parts of type message/external-body are not automatically retrieved
2199 anymore.
2200 Instead, information on how to retrieve them is output.
2201 Not supporting this rare case saved nearly one thousand lines of code.
2202 .Ci 55e1d8c654ee0f7c45b9361ce34617983b454c32
2203 .\" XXX mention somewhere else too: (The profile entry `nmh-access-ftp'
2204 .\" and sbr/ruserpass.c for reading ~/.netrc are gone now.)
2205 `application/octet-stream; type=tar' is not special anymore.
2206 Automatically extracting such MIME parts had been the dangerous part
2207 of the
2208 .Sw -auto
2209 mode.
2210 .Ci 94c80042eae3383c812d9552089953f9846b1bb6
2214 .U3 "Showing MIME Messages
2215 .P
2216 The program
2217 .Pn mhshow
2218 had been written to display MIME messages.
2219 It implemented the conceptional view of the MIME RFCs.
2220 Nmh's
2221 .Pn mhshow
2222 handled each MIME part independently, presenting them separately
2223 to the user.
2224 This does not match today's understanding of email attachments,
2225 where displaying a message is seen to be a single, integrated operation.
2226 Today, email messages are expected to consist of a main text part
2227 plus possibly attachments.
2228 They are not any more seen to be arbitrary MIME hierarchies with
2229 information on how to display the individual parts.
2230 I adjusted
2231 .Pn mhshow 's
2232 behavior to the modern view on the topic.
2233 .P
2234 One should note that this section completely ignores the original
2235 .Pn show
2236 program, because it was not capable to display MIME messages
2237 and is no longer part of mmh.
2238 .\" XXX ref to other section
2239 Although
2240 .Pn mhshow
2241 was renamed to
2242 .Pn show
2243 in mmh, this section uses the name
2244 .Pn mhshow ,
2245 in order to avoid confusion.
2246 .P
2247 In mmh, the basic idea is that
2248 .Pn mhshow
2249 should display a message in one single pager session.
2250 Therefore,
2251 .Pn mhshow
2252 invokes a pager session for all its output,
2253 whenever it prints to a terminal.
2254 .Ci a4197ea6ffc5c1550e8b52d5a654bcaaaee04a4e
2255 In consequence,
2256 .Pn mhl
2257 does no more invoke a pager.
2258 .Ci 0e46503be3c855bddaeae3843e1b659279c35d70
2259 With
2260 .Pn mhshow
2261 replacing the original
2262 .Pn show ,
2263 output from
2264 .Pn mhl
2265 does not go to the terminal directly, but through
2266 .Pn mhshow .
2267 Hence,
2268 .Pn mhl
2269 does not need to invoke a pager.
2270 The one and only job of
2271 .Pn mhl
2272 is to format messages or parts of them.
2273 The only place in mmh, where a pager is invoked is
2274 .Pn mhshow .
2275 .P
2276 .Pe mhshow-show-*
2277 profile entries can be used to display MIME parts in a specific way.
2278 For instance, PDF and Postscript files could be converted to plain text
2279 to display them in the terminal.
2280 In mmh, MIME parts will always be displayed serially.
2281 The request to display the MIME type `multipart/parallel' in parallel
2282 is ignored.
2283 It is simply treated as `multipart/mixed'.
2284 .Ci d0581ba306a7299113a346f9b4c46ce97bc4cef6
2285 This could already be requested with the, now removed,
2286 .Sw -serialonly
2287 switch of
2288 .Pn mhshow .
2289 As MIME parts are always processed exclusively, i.e. serially,
2290 the `%e' escape in
2291 .Pe mhshow-show-*
2292 profile entries became useless and was thus removed.
2293 .Ci a20d405db09b7ccca74d3e8c57550883da49e1ae
2294 .P
2295 In the intended setup, only text content would be displayed.
2296 Non-text content would be converted to text by appropriate
2297 .Pe mhshow-show-*
2298 profile entries before, if possible and wanted.
2299 All output would be displayed in a single pager session.
2300 Other kinds of attachments are ignored.
2301 With
2302 .Pe mhshow-show-*
2303 profile entries for them, they can be displayed serially along
2304 the message.
2305 For parallel display, the attachments need to be stored to disk first.
2306 .P
2307 To display text content in foreign charsets, they need to be converted
2308 to the native charset.
2309 Therefore,
2310 .Pe mhshow-charset-*
2311 profile entries used to be needed.
2312 In mmh, the conversion is performed automatically by piping the
2313 text through the
2314 .Pn iconv
2315 command, if necessary.
2316 .Ci 2433122c20baccb10b70b49c04c6b0497b5b3b60
2317 Custom
2318 .Pe mhshow-show-*
2319 rules for textual content might need a
2320 .Cl "iconv -f %c %f |
2321 prefix to have the text converted to the native charset.
2322 .P
2323 Although the conversion of foreign charsets to the native one
2324 has improved, it is not consistent enough.
2325 Further work needs to be done and
2326 the basic concepts in this field need to be re-thought.
2327 Though, the default setup of mmh displays message in foreign charsets
2328 correctly without the need to configure anything.
2331 .ig
2333 .P
2334 mhshow/mhstore: Removed support for retrieving message/external-body parts.
2335 These tools will not download the contents automatically anymore. Instead,
2336 they print the information needed to get the contents. If someone should
2337 really receive one of those rare message/external-body messages, he can
2338 do the job manually. We save nearly a thousand lines of code. That's worth
2339 it!
2340 (The profile entry `nmh-access-ftp' and sbr/ruserpass.c for reading
2341 ~/.netrc are gone now.)
2342 .Ci 55e1d8c654ee0f7c45b9361ce34617983b454c32
2344 ..
2348 .H2 "Signing and Encrypting
2349 .P
2350 Nmh offers no direct support for digital signatures and message encryption.
2351 This functionality needed to be added through third-party software.
2352 In mmh, the functionality should be included because it
2353 is a part of modern email and likely wanted by users of mmh.
2354 A fresh mmh installation should support signing and encrypting
2355 out-of-the-box.
2356 Therefore, Neil Rickert's
2357 .Pn mhsign
2358 and
2359 .Pn mhpgp
2360 scripts
2361 .[
2362 neil rickert mhsign mhpgp
2363 .]
2364 were included into mmh
2365 .Ci f45cdc98117a84f071759462c7ae212f4bc5ab2e
2366 .Ci 58cf09aa36e9f7f352a127158bbf1c5678bc6ed8 .
2367 The scripts fit well because they are lightweight and
2368 similar of style to the existing tools.
2369 Additionally, no licensing difficulties appeared,
2370 as they are part of the public domain.
2371 .P
2372 .Pn mhsign
2373 handles the signing and encrypting part.
2374 It comprises about 250 lines of shell code and interfaces between
2375 .Pn gnupg
2376 and
2377 the MH system.
2378 It was meant to be invoked manually at the WhatNow prompt, but in mmh,
2379 .Pn send
2380 invokes
2381 .pn mhsign
2382 automatically
2383 .Ci c7b5e1df086bcc37ff40163ee67571f076cf6683 .
2384 Special header fields were introduced to request this action.
2385 If a draft contains the
2386 .Hd Sign
2387 header field,
2388 .Pn send
2389 will initiate the signing.
2390 The signing key is either chosen automatically or specified by the
2391 .Pe Pgpkey
2392 profile entry.
2393 .Pn send
2394 always create signatures using the PGP/MIME standard, \" REF XXX
2395 but by manually invoking
2396 .Pn mhsign ,
2397 old-style non-MIME signatures can be created as well.
2398 To encrypt an outgoing message, the draft needs to contain an
2399 .Hd Enc
2400 header field.
2401 Public keys of all recipients are searched for in the gnupg keyring and
2402 in a file called
2403 .Fn pgpkeys ,
2404 which contains exceptions and overrides.
2405 Unless public keys are found for all recipients,
2406 .Pn mhsign
2407 will refuse to encrypt it.
2408 Currently, messages with hidden (BCC) recipients can not be encrypted.
2409 This work is pending because it requires a structurally more complex
2410 approach.
2411 .P
2412 .Pn mhpgp
2413 is the companion to
2414 .Pn mhsign .
2415 It verifies signatures and decrypts messages.
2416 Encrypted messages can either be temporarily decrypted for display
2417 or permanently decrypted and stored into the current folder.
2418 Currently,
2419 .Pn mhpgp
2420 needs to be invoked manually.
2421 The integration into
2422 .Pn show
2423 and
2424 .Pn mhstore
2425 to verify signatures and decrypt messages as needs
2426 is planned but not realized yet.
2427 .P
2428 Both scripts were written for nmh, hence they needed to be adjust
2429 according to the differences between nmh and mmh.
2430 For instance, they use the backup prefix no longer.
2431 Further more, compatibility support for old PGP features was dropped.
2432 .P
2433 The integrated message signing and encrypting support is one of the
2434 most recent features in mmh.
2435 It has not yet had the time to mature.
2436 User feedback and personal experience need to be accumulated to
2437 direct the further development of the facility.
2438 Although the feedback and experience is still missing,
2439 it seems to be worthwhile to consider adding
2440 .Sw -[no]sign
2441 and
2442 .Sw -[no]enc
2443 switches to
2444 .Pn send ,
2445 to be able to override the corresponding header fields.
2446 A profile entry:
2447 .VS
2448 send: -sign
2449 VE
2450 would then activate signing for all outgoing messages.
2451 With the present approach, a
2452 .Hd Send
2453 header component needs to be added to each draft template
2454 to achieve the same result.
2455 Adding the switches would ease the work greatly and keep the
2456 template files clean.
2461 .H2 "Draft and Trash Folder
2462 .P
2464 .U3 "Draft Folder
2465 .Id draft-folder
2466 .P
2467 In the beginning, MH had the concept of a draft message.
2468 This is the file
2469 .Fn draft
2470 in the MH directory, which is treated special.
2471 On composing a message, this draft file was used.
2472 When starting to compose another message before the former one was sent,
2473 the user had to decide among:
2474 .LI 1
2475 Using the old draft to finish and send it before starting with a new one.
2476 .LI 2
2477 Discarding the old draft and replacing it with a new one.
2478 .LI 3
2479 Preserving the old draft by refiling it to a folder.
2480 .LP
2481 It was only possible to work in alternation on multiple drafts.
2482 Therefore, the current draft needed to be refiled to a folder and
2483 another one re-used for editing.
2484 Working on multiple drafts at the same time was impossible.
2485 The usual approach of switching to a different MH context did not
2486 help anything.
2487 .P
2488 The draft folder facility exists to
2489 allow true parallel editing of drafts, in a straight forward way.
2490 It was introduced by Marshall T. Rose, already in 1984.
2491 Similar to other new features, the draft folder was inactive by default.
2492 Even in nmh, the highly useful draft folder was not available
2493 out-of-the-box.
2494 At least, Richard Coleman added the man page
2495 .Mp mh-draft (5)
2496 to better document the feature.
2497 .P
2498 Not using the draft folder facility has the single advantage of having
2499 the draft file at a static location.
2500 This is simple in simple cases but the concept does not scale for more
2501 complex cases.
2502 The concept of the draft message is too limited for the problem.
2503 Therefore the draft folder was introduced.
2504 It is the more powerful and more natural concept.
2505 The draft folder is a folder like any other folder in MH.
2506 Its messages can be listed like any other messages.
2507 A draft message is no longer a special case.
2508 Tools do not need special switches to work on the draft message.
2509 Hence corner cases were removed.
2510 .P
2511 The trivial part of the work was activating the draft folder with a
2512 default name.
2513 I chose the name
2514 .Fn +drafts
2515 for obvious reasons.
2516 In consequence, the command line switches
2517 .Sw -draftfolder
2518 and
2519 .Sw -draftmessage
2520 could be removed.
2521 More difficult but also more improving was updating the tools to the
2522 new concept.
2523 For nearly three decades, the tools needed to support two draft handling
2524 approaches.
2525 By fully switching to the draft folder, the tools could be simplified
2526 by dropping the awkward draft message handling code.
2527 .Sw -draft
2528 switches were removed because operating on a draft message is no longer
2529 special.
2530 It became indistinguishable to operating on any other message.
2531 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
2532 .P
2533 There is no more need to query the user for draft handling
2534 .Ci 2d48b455c303a807041c35e4248955f8bec59eeb .
2535 It is always possible to add another new draft.
2536 Refiling drafts is without difference to refiling other messages.
2537 All of these special cases are gone.
2538 Yet, one draft-related switch remained.
2539 .Pn comp
2540 still has
2541 .Sw -[no]use
2542 for switching between two modes:
2543 .LI 1
2544 .Sw -use
2545 to modify an existing draft.
2546 .LI 2
2547 .Sw -nouse
2548 to compose a new draft, possibly taking some existing message as template.
2549 .LP
2550 In either case, the behavior of
2551 .Pn comp
2552 is deterministic.
2553 .P
2554 .Pn send
2555 now operates on the current message in the draft folder by default.
2556 As message and folder can both be overridden by specifying them on
2557 the command line, it is possible to send any message in the mail storage
2558 by simply specifying its number and folder.
2559 In contrast to the other tools,
2560 .Pn send
2561 takes the draft folder as its default folder.
2562 .P
2563 Dropping the draft message concept in favor for the draft folder concept,
2564 removed special cases with regular cases.
2565 This simplified the source code of the tools, as well as the concepts.
2566 In mmh, draft management does not break with the MH concepts
2567 but applies them.
2568 .Cl "scan +drafts" ,
2569 for instance, is a truly natural request.
2570 Most of the work was already performed by Rose in the eighties.
2571 The original improvement of mmh is dropping the old draft message approach
2572 and thus simplifying the tools, the documentation and the system as a whole.
2573 Although my part in the draft handling improvement was small,
2574 it was an important one.
2577 .U3 "Trash Folder
2578 .Id trash-folder
2579 .P
2580 Similar to the situation for drafts is the situation for removed messages.
2581 Historically, a message was ``deleted'' by prepending a specific
2582 \fIbackup prefix\fP, usually the comma character,
2583 to the file name.
2584 The specific file would then be ignored by MH because only files with
2585 names consisting of digits only are treated as messages.
2586 Although files remained in the file system,
2587 the messages were no longer visible in MH.
2588 To truly delete them, a maintenance job was needed.
2589 Usually a cron job was installed to delete them after a grace time.
2590 For instance:
2591 .VS
2592 find $HOME/Mail -type f -name ',*' -ctime +7 -delete
2593 VE
2594 In such a setup, the original message could be restored
2595 within the grace time interval by stripping the
2596 backup prefix from the file name.
2597 But the user could not rely on this statement.
2598 If the last message of a folder with six messages (\fL1-6\fP) was removed,
2599 message
2600 .Fn 6 ,
2601 became file
2602 .Fn ,6 .
2603 If then a new message entered the same folder, it would be named with
2604 the number one above the highest existing message number.
2605 In this case the message would be named
2606 .Fn 6
2607 then.
2608 If this new message would be removed as well,
2609 then the backup of the former message is overwritten.
2610 Hence, the ability to restore removed messages did not only depend on
2611 the ``sweeping cron job'' but also on the removing of further messages.
2612 It is undesirable to have such obscure and complex mechanisms.
2613 The user should be given a small set of clear assertions, such as
2614 ``Removed files are restorable within a seven-day grace time.''
2615 With the addition ``... unless a message with the same name in the
2616 same folder is removed before.'' the statement becomes complex.
2617 A user will hardly be able to keep track of any removal to know
2618 if the assertion still holds true for a specific file.
2619 In practice, the real mechanism is unclear to the user.
2620 The consequences of further removals are not obvious.
2621 .P
2622 Further more, the backup files are scattered within the whole mail storage.
2623 This complicates managing them.
2624 It is possible with the help of
2625 .Pn find ,
2626 but everything would be more convenient
2627 if the deleted messages would be collected in one place.
2628 .P
2629 The profile entry
2630 .Pe rmmproc
2631 (previously named
2632 .Pe Delete-Prog )
2633 was introduced very early to improve the situation.
2634 It could be set to any command, which would be executed to remove
2635 the specified messages.
2636 This would override the default action described above.
2637 Refiling the to-be-removed files to a trash folder is the usual example.
2638 Nmh's man page
2639 .Mp rmm (1)
2640 proposes to set the
2641 .Pe rmmproc
2642 to
2643 .Cl "refile +d
2644 to move messages to the trash folder,
2645 .Fn +d ,
2646 instead of renaming them with the backup prefix.
2647 The man page proposes additionally the expunge command
2648 .Cl "rm `mhpath +d all`
2649 to empty the trash folder.
2650 .P
2651 Removing messages in such a way has advantages.
2652 The mail storage is prevented from being cluttered with removed messages
2653 because they are all collected in one place.
2654 Existing and removed messages are thus separated more strictly.
2655 No backup files are silently overwritten.
2656 But most important is the ability to keep removed messages in the MH domain.
2657 Messages in the trash folder can be listed like those in any other folder.
2658 Deleted messages can be displayed like any other messages.
2659 .Pn refile
2660 can restore deleted messages.
2661 All operations on deleted files are still covered by the MH tools.
2662 The trash folder is just like any other folder in the mail storage.
2663 .P
2664 Similar to the draft folder case, I dropped the old backup prefix approach
2665 in favor for replacing it by the better suiting trash folder system.
2666 Hence,
2667 .Pn rmm
2668 calls
2669 .Pn refile
2670 to move the to-be-removed message to the trash folder,
2671 .Fn +trash
2672 by default.
2673 To sweep it clean, the user can use
2674 .Cl "rmm -unlink +trash a" ,
2675 where the
2676 .Sw -unlink
2677 switch causes the files to be unlinked.
2678 .Ci 8edc5aaf86f9f77124664f6801bc6c6cdf258173
2679 .Ci ca0b3e830b86700d9e5e31b1784de2bdcaf58fc5
2680 .P
2681 Dropping the legacy approach and converting to the new approach completely
2682 simplified the code base.
2683 The relationship between
2684 .Pn rmm
2685 and
2686 .Pn refile
2687 was inverted.
2688 In mmh,
2689 .Pn rmm
2690 invokes
2691 .Pn refile ,
2692 which used to be the other way round.
2693 Yet, the relationship is simpler now.
2694 Loops, like described in nmh's man page for
2695 .Mp refile (1),
2696 can no longer occur:
2697 .QS
2698 Since
2699 .Pn refile
2700 uses your
2701 .Pe rmmproc
2702 to delete the message, the
2703 .Pe rmmproc
2704 must NOT call
2705 .Pn refile
2706 without specifying
2707 .Sw -normmproc
2708 or you will create an infinite loop.
2709 .QE
2710 .LP
2711 .Pn rmm
2712 either unlinks a message with
2713 .Fu unlink()
2714 or invokes
2715 .Pn refile
2716 to move it to the trash folder.
2717 .Pn refile
2718 does not invoke any tools.
2719 .P
2720 By generalizing the message removal in the way that it became covered
2721 by the MH concepts made the whole system more powerful.
2727 .H2 "Modern Defaults
2728 .P
2729 Nmh has a bunch of convenience-improving features inactive by default,
2730 although one can expect every new user wanting to have them active.
2731 The reason they are inactive by default is the wish to stay compatible
2732 with old versions.
2733 But what is the definition for old versions?
2734 Still, the highly useful draft folder facility has not been activated
2735 by default although it was introduced over twenty-five years ago.
2736 .[
2737 rose romine real work
2738 .]
2739 The community seems not to care.
2740 This is one of several examples that require new users to first build up
2741 a profile before they can access the modern features of nmh.
2742 Without an extensive profile, the setup is hardly usable
2743 for modern emailing.
2744 The point is not the customization of the setup,
2745 but the need to activate generally useful facilities.
2746 .P
2747 Yet, the real problem lies less in enabling the features, as this is
2748 straight forward as soon as one knows what he wants.
2749 The real problem is that new users need deep insight into the project
2750 to find out about inactive features nmh already provides.
2751 To give an example, I needed one year of using nmh
2752 before I became aware of the existence of the attachment system.
2753 One could argue that this fact disqualifies my reading of the
2754 documentation.
2755 If I would have installed nmh from source back then, I could agree.
2756 Yet, I had used a prepackaged version and had expected that it would
2757 just work.
2758 Nevertheless, I had been convinced by the concepts of MH already
2759 and I am a software developer,
2760 still I required a lot of time to discover the cool features.
2761 How can we expect users to be even more advanced than me,
2762 just to allow them use MH in a convenient and modern way?
2763 Unless they are strongly convinced of the concepts, they will fail.
2764 I have seen friends of me giving up disappointed
2765 before they truly used the system,
2766 although they had been motivated in the beginning.
2767 They suffer hard enough to get used to the tool chest approach,
2768 we developers should spare them further inconveniences.
2769 .P
2770 Maintaining compatibility for its own sake is bad,
2771 because the code base collects more and more compatibility code.
2772 Sticking to the compatiblity code means remaining limited;
2773 whereas adjusting to the changes renders the compatibility unnecessary.
2774 Keeping unused alternatives in the code is a bad choice as they likely
2775 gather bugs, by not being well tested.
2776 Also, the increased code size and the greater number of conditions
2777 increase the maintenance costs.
2778 If any MH implementation would be the back-end of widespread
2779 email clients with large user bases, compatibility would be more
2780 important.
2781 Yet, it appears as if this is not the case.
2782 Hence, compatibility is hardly important for technical reasons.
2783 Its importance originates rather from personal reasons.
2784 Nmh's user base is small and old.
2785 Changing the interfaces would cause inconvenience to long-term users of MH.
2786 It would force them to change their many years old MH configurations.
2787 I do understand this aspect, but by sticking to the old users,
2788 new users are kept away.
2789 Yet, the future lies in new users.
2790 In consequence, mmh invites new users by providing a convenient
2791 and modern setup, readily usable out-of-the-box.
2792 .P
2793 In mmh, all modern features are active by default and many previous
2794 approaches are removed or only accessible in manual ways.
2795 New default features include:
2796 .BU
2797 The attachment system (\c
2798 .Hd Attach ).
2799 .Ci 8ff284ff9167eff8f5349481529332d59ed913b1
2800 .BU
2801 The draft folder facility (\c
2802 .Fn +drafts ).
2803 .Ci 337338b404931f06f0db2119c9e145e8ca5a9860
2804 .BU
2805 The unseen sequence (`u')
2806 .Ci c2360569e1d8d3678e294eb7c1354cb8bf7501c1
2807 and the sequence negation prefix (`!').
2808 .Ci db74c2bd004b2dc9bf8086a6d8bf773ac051f3cc
2809 .BU
2810 Quoting the original message in the reply.
2811 .Ci 67411b1f95d6ec987b4c732459e1ba8a8ac192c6
2812 .BU
2813 Forwarding messages using MIME.
2814 .Ci 6e271608b7b9c23771523f88d23a4d3593010cf1
2815 .LP
2816 In consequence, a setup with a profile that defines only the path to the
2817 mail storage, is already convenient to use.
2818 Again, Paul Vixie's ``edginess'' call supports the direction I took:
2819 ``the `main branch' should just be modern''.
2820 .[
2821 paul vixie edginess nmh-workers
2822 .]
2828 .\" --------------------------------------------------------------
2829 .H1 "Styling
2830 .P
2831 Kernighan and Pike have emphasized the importance of style in the
2832 preface of their book:
2833 .[ [
2834 kernighan pike practice of programming
2835 .], p. x]
2836 .QS
2837 Chapter 1 discusses programming style.
2838 Good style is so important to good programming that we have chose
2839 to cover it first.
2840 .QE
2841 This section covers changes in mmh that were guided by the desire
2842 to improve on style.
2843 Many of them follow the rules given in the quoted book.
2844 .[
2845 kernighan pike practice of programming
2846 .]
2851 .H2 "Code Style
2852 .Id code-style
2853 .P
2854 .U3 "Indentation Style
2855 .P
2856 Indentation styles are the holy cow of programmers.
2857 Kernighan and Pike
2858 .[ [
2859 kernighan pike practice of programming
2860 .], p. 10]
2861 wrote:
2862 .QS
2863 Programmers have always argued about the layout of programs,
2864 but the specific style is much less important than its consistent
2865 application.
2866 Pick one style, preferably ours, use it consistently, and don't waste
2867 time arguing.
2868 .QE
2869 .P
2870 I agree that the constant application is most important,
2871 but I believe that some styles have advantages over others.
2872 For instance the indentation with tab characters only.
2873 Tab characters directly map to the nesting level \(en
2874 one tab, one level.
2875 Tab characters are flexible because developers can adjust them to
2876 whatever width they like to have.
2877 There is no more need to run
2878 .Pn unexpand
2879 or
2880 .Pn entab
2881 programs to ensure the correct mixture of leading tabs and spaces.
2882 The simple rules are: (1) Leading whitespace must consist of tabs only.
2883 (2) Any other whitespace should consist of spaces.
2884 These two rules ensure the integrity of the visual appearance.
2885 Although reformatting existing code should be avoided, I did it.
2886 I did not waste time arguing; I just reformated the code.
2887 .Ci a485ed478abbd599d8c9aab48934e7a26733ecb1
2889 .U3 "Comments
2890 .P
2891 Section 1.6 of
2892 .[ [
2893 kernighan pike practice of programming
2894 .], p. 23]
2895 demands: ``Don't belabor the obvious.''
2896 Hence, I simply removed all the comments in the following code excerpt:
2897 .VS
2898 context_replace(curfolder, folder); /* update current folder */
2899 seq_setcur(mp, mp->lowsel); /* update current message */
2900 seq_save(mp); /* synchronize message sequences */
2901 folder_free(mp); /* free folder/message structure */
2902 context_save(); /* save the context file */
2904 [...]
2906 int c; /* current character */
2907 char *cp; /* miscellaneous character pointer */
2909 [...]
2911 /* NUL-terminate the field */
2912 *cp = '\0';
2913 VE
2914 .Ci 426543622b377fc5d091455cba685e114b6df674
2915 .P
2916 The program code explains enough itself, already.
2919 .U3 "Names
2920 .P
2921 Kernighan and Pike suggest:
2922 ``Use active names for functions''.
2923 .[ [
2924 kernighan pike practice of programming
2925 .], p. 4]
2926 One application of this rule was the rename of
2927 .Fu check_charset()
2928 to
2929 .Fu is_native_charset() .
2930 .Ci 8d77b48284c58c135a6b2787e721597346ab056d
2931 The same change fixed a violation of ``Be accurate'' as well.
2932 The code did not match the expectation the function suggested,
2933 as it, for whatever reason, only compared the first ten characters
2934 of the charset name.
2935 .P
2936 More important than using active names is using descriptive names.
2937 .VS
2938 m_unknown(in); /* the MAGIC invocation... */
2939 VE
2940 Renaming the obscure
2941 .Fu m_unknown()
2942 function was a delightful event, although it made the code less funny.
2943 .Ci 611d68d19204d7cbf5bd585391249cb5bafca846
2944 .P
2945 Magic numbers are generally considered bad style.
2946 Obviously, Kernighan and Pike agree:
2947 ``Give names to magic numbers''.
2948 .[ [
2949 kernighan pike practice of programming
2950 .], p. 19]
2951 One such change was naming the type of input \(en mbox or mail folder \(en
2952 to be scanned:
2953 .VS
2954 #define SCN_MBOX (-1)
2955 #define SCN_FOLD 0
2956 VE
2957 .Ci 7ffb36d28e517a6f3a10272056fc127592ab1c19
2958 .P
2959 The argument
2960 .Ar outnum
2961 of the function
2962 .Fu scan()
2963 in
2964 .Fn uip/scansbr.c
2965 defines the number of the message to be created.
2966 If no message is to be created, the argument is misused to transport
2967 program logic.
2968 This lead to obscure code.
2969 I improved the clarity of the code by introducing two variables:
2970 .VS
2971 int incing = (outnum > 0);
2972 int ismbox = (outnum != 0);
2973 VE
2974 They cover the magic values and are used for conditions.
2975 The variable
2976 .Ar outnum
2977 is only used when it holds an ordinary message number.
2978 .Ci b8b075c77be7794f3ae9ff0e8cedb12b48fd139f
2979 The clarity improvement of the change showed detours in the program logic
2980 of related code parts.
2981 Having the new variables with descriptive names, a more
2982 straight forward implementation became apparent.
2983 Before the code was clarified, the possibility to improve had not be seen.
2984 .Ci aa60b0ab5e804f8befa890c0a6df0e3143ce0723
2988 .H2 "Structural Rework
2989 .P
2990 Although the stylistic changes described up to here improve the
2991 readability of the source code, all of them are changes ``in the small''.
2992 Structural changes affect a much larger area.
2993 They are more difficult to do but lead to larger improvements,
2994 especially as they influence the outer shape of the tools as well.
2995 .P
2996 At the end of their chapter on style,
2997 Kernighan and Pike ask: ``But why worry about style?''
2998 Following are two examples of structural rework that show
2999 why style is important in the first place.
3002 .U3 "Rework of \f(CWanno\fP
3003 .P
3004 Until 2002,
3005 .Pn anno
3006 had six functional command line switches,
3007 .Sw -component
3008 and
3009 .Sw -text ,
3010 which have an argument each,
3011 and the two pairs of flags,
3012 .Sw -[no]date
3013 and
3014 .Sw -[no]inplace .
3015 Then Jon Steinhart introduced his attachment system.
3016 In need for more advanced annotation handling, he extended
3017 .Pn anno .
3018 He added five more switches:
3019 .Sw -draft ,
3020 .Sw -list ,
3021 .Sw -delete ,
3022 .Sw -append ,
3023 and
3024 .Sw -number ,
3025 the last one taking an argument.
3026 .Ci 7480dbc14bc90f2d872d434205c0784704213252
3027 Later,
3028 .Sw -[no]preserve
3029 was added.
3030 .Ci d9b1d57351d104d7ec1a5621f090657dcce8cb7f
3031 Then, the Synopsis section of the man page
3032 .Mp anno (1)
3033 read:
3034 .VS
3035 anno [+folder] [msgs] [-component field] [-inplace | -noinplace]
3036 [-date | -nodate] [-draft] [-append] [-list] [-delete]
3037 [-number [num|all]] [-preserve | -nopreserve] [-version]
3038 [-help] [-text body]
3039 VE
3040 .LP
3041 The implementation followed the same structure.
3042 Problems became visible when
3043 .Cl "anno -list -number 42
3044 worked on the current message instead on message number 42,
3045 and
3046 .Cl "anno -list -number l:5
3047 did not work on the last five messages but failed with the mysterious
3048 error message: ``anno: missing argument to -list''.
3049 Yet, the invocation matched the specification in the man page.
3050 There, the correct use of
3051 .Sw -number
3052 was defined as being
3053 .Cl "[-number [num|all]]
3054 and the textual description for the combination with
3055 .Sw -list
3056 read:
3057 .QS
3058 The
3059 .Sw -list
3060 option produces a listing of the field bodies for
3061 header fields with names matching the specified component,
3062 one per line. The listing is numbered, starting at 1, if the
3063 .Sw -number
3064 option is also used.
3065 .QE
3066 .LP
3067 The problem was manifold.
3068 The code required a numeric argument to the
3069 .Sw -number
3070 switch.
3071 If it was missing or non-numeric,
3072 .Pn anno
3073 aborted with an error message that had an off-by-one error,
3074 printing the switch one before the failing one.
3075 Semantically, the argument to the
3076 .Sw -number
3077 switch is only necessary in combination with
3078 .Sw -delete ,
3079 but not with
3080 .Sw -list .
3081 .P
3082 Trying to fix these problems on the surface would not have solved
3083 them truly, as they originate from a discrepance between the
3084 structure of the problem and the structure implemented in the program.
3085 Such structural differences can not be cured on the surface.
3086 They need to be solved by adjusting the structure of the implementation
3087 to the structure of the problem.
3088 .P
3089 In 2002, the new switches
3090 .Sw -list
3091 and
3092 .Sw -delete
3093 were added in the same way, the
3094 .Sw -number
3095 switch for instance had been added.
3096 Yet, they are of structural different type.
3097 Semantically,
3098 .Sw -list
3099 and
3100 .Sw -delete
3101 introduce modes of operation.
3102 Historically,
3103 .Pn anno
3104 had only one operation mode: adding header fields.
3105 With the extension it got two more modes:
3106 .\" XXX got
3107 listing and deleting header fields.
3108 The structure of the code changes did not pay respect to this
3109 fundamental change to
3110 .Pn anno 's
3111 behavior.
3112 Neither the implementation nor the documentation did clearly
3113 define them as being exclusive modes of operation.
3114 Having identified the problem, I solved it by putting structure into
3115 .Pn anno
3116 and its documentation.
3117 .Ci d54c8db8bdf01e8381890f7729bc0ef4a055ea11
3118 .P
3119 The difference is visible in both the code and the documentation.
3120 The following code excerpt:
3121 .VS
3122 int delete = -2; /* delete header element if set */
3123 int list = 0; /* list header elements if set */
3124 [...]
3125 case DELETESW: /* delete annotations */
3126 delete = 0;
3127 continue;
3128 case LISTSW: /* produce a listing */
3129 list = 1;
3130 continue;
3131 VE
3132 .LP
3133 was replaced by:
3134 .VS
3135 static enum { MODE_ADD, MODE_DEL, MODE_LIST } mode = MODE_ADD;
3136 [...]
3137 case DELETESW: /* delete annotations */
3138 mode = MODE_DEL;
3139 continue;
3140 case LISTSW: /* produce a listing */
3141 mode = MODE_LIST;
3142 continue;
3143 VE
3144 .LP
3145 The replacement code does not only reflect the problem's structure better,
3146 it is easier to understand as well.
3147 The same applies to the documentation.
3148 The man page was completely reorganized to propagate the same structure.
3149 This is visible in the Synopsis section:
3150 .VS
3151 anno [+folder] [msgs] [-component field] [-text body]
3152 [-append] [-date | -nodate] [-preserve | -nopreserve]
3153 [-Version] [-help]
3155 anno -delete [+folder] [msgs] [-component field] [-text
3156 body] [-number num | all ] [-preserve | -nopreserve]
3157 [-Version] [-help]
3159 anno -list [+folder] [msgs] [-component field] [-number]
3160 [-Version] [-help]
3161 VE
3162 .\" XXX think about explaining the -preserve rework?
3166 .U3 "Path Conversion
3167 .P
3168 Four kinds of path names can appear in MH:
3169 .LI 1
3170 Absolute Unix directory paths, like
3171 .Fn /etc/passwd .
3172 .LI 2
3173 Relative Unix directory paths, like
3174 .Fn ./foo/bar .
3175 .LI 3
3176 Absolute MH folder paths, like
3177 .Fn +friends/phil .
3178 .LI 4
3179 Relative MH folder paths, like
3180 .Fn @subfolder .
3181 .LP
3182 The last type, relative MH folder paths, are hardly documented.
3183 Nonetheless, they are useful for large mail storages.
3184 The current mail folder is specified as `\c
3185 .Fn @ ',
3186 just like the current directory is specified as `\c
3187 .Fn . '.
3188 .P
3189 To allow MH tools to understand all four notations,
3190 they need to convert between them.
3191 .\" XXX between?
3192 In nmh, these path name conversion functions were located in the files
3193 .Fn sbr/path.c
3194 (``return a pathname'') and
3195 .Fn sbr/m_maildir.c
3196 (``get the path for the mail directory'').
3197 The seven functions in the two files were documented with no more
3198 than two comments, which described obvious information.
3199 The function signatures were neither explaining:
3200 .VS
3201 char *path(char *, int);
3202 char *pluspath(char *);
3203 char *m_mailpath(char *);
3204 char *m_maildir(char *);
3205 VE
3206 .P
3207 My investigation provides the following description:
3208 .LI 1
3209 The second parameter of
3210 .Fu path()
3211 defines the type of path given as first parameter.
3212 Directory paths are converted to absolute directory paths.
3213 Folder paths are converted to absolute folder paths.
3214 Folder paths must not include a leading `\fL@\fP' character.
3215 Leading plus characters are preserved.
3216 The result is a pointer to newly allocated memory.
3217 .LI 2
3218 .Fu pluspath()
3219 is a convenience-wrapper to
3220 .Fu path() ,
3221 to convert folder paths only.
3222 This function can not be used for directory paths.
3223 An empty string parameter causes a buffer overflow.
3224 .LI 3
3225 .Fu m_mailpath()
3226 converts directory paths to absolute directory paths.
3227 The characters `\fL+\fP' or `\fL@\fP' at the beginning of the path name are
3228 treated literal, i.e. as the first character of a relative directory path.
3229 Hence, this function can not be used for folder paths.
3230 In any case, the result is an absolute directory path.
3231 The result is a pointer to newly allocated memory.
3232 .LI 4
3233 .Fu m_maildir()
3234 returns the parameter unchanged if it is an absolute directory path
3235 or begins with the entry `\fL.\fP' or `\fL..\fP'.
3236 All other strings are prepended with the current working directory.
3237 Hence, this functions can not be used for folder paths.
3238 The result is either an absolute directory path or a relative
3239 directory path, starting with a dot.
3240 In contrast to the other functions, the result is a pointer to
3241 static memory.
3242 .P
3243 The situation was obscure, irritating, error-prone, and non-orthogonal.
3244 No clear terminology was used to name the different kinds of path names.
3245 The first argument of
3246 .Fu m_mailpath() ,
3247 for instance, was named
3248 .Ar folder ,
3249 though
3250 .Fu m_mailpath()
3251 can not be used for MH folders.
3252 .P
3253 I reworked the path name conversion completely, introducing clarity.
3254 First of all, the terminology needed to be defined.
3255 A path name is either in the Unix domain, then it is called
3256 \fIdirectory path\fP, `dirpath' for short, or it is in the MH domain,
3257 then it is called \fIfolder path\fP, `folpath' for short.
3258 The two terms need to be used with strict distinction.
3259 Having a clear terminology is often an indicator of having understood
3260 the problem itself.
3261 Second, I exploited the concept of path type indicators.
3262 By requesting every path name to start with a clear type identifier,
3263 conversion between the types can be fully automated.
3264 Thus the tools can accept paths of any type from the user.
3265 Therefore, it was necessary to require relative directory paths to be
3266 prefixed with a dot character.
3267 In consequence, the dot character could no longer be an alias for the
3268 current message.
3269 .Ci cff0e16925e7edbd25b8b9d6d4fbdf03e0e60c01
3270 Third, I created three new functions to replace the previous mess:
3271 .LI 1
3272 .Fu expandfol()
3273 converts folder paths to absolute folder paths,
3274 without the leading plus character.
3275 Directory paths are simply passed through.
3276 This function is to be used for folder paths only, thus the name.
3277 The result is a pointer to static memory.
3278 .LI 2
3279 .Fu expanddir()
3280 converts directory paths to absolute directory paths.
3281 Folder paths are treated as relative directory paths.
3282 This function is to be used for directory paths only, thus the name.
3283 The result is a pointer to static memory.
3284 .LI 3
3285 .Fu toabsdir()
3286 converts any type of path to an absolute directory path.
3287 This is the function of choice for path conversion.
3288 Absolute directory paths are the most general representation of a
3289 path name.
3290 The result is a pointer to static memory.
3291 .P
3292 .\" XXX ueberfluessig?
3293 The new functions have names that indicate their use.
3294 Two of the functions convert relative to absolute path names of the
3295 same type.
3296 The third function converts any path name type to the most general one,
3297 the absolute directory path.
3298 All of the functions return pointers to static memory.
3299 All three functions are implemented in
3300 .Fn sbr/path.c .
3301 .Fn sbr/m_maildir.c
3302 is removed.
3303 .Ci d39e2c447b0d163a5a63f480b23d06edb7a73aa0
3304 .P
3305 Along with the path conversion rework, I also replaced
3306 .Fu getfolder(FDEF)
3307 with
3308 .Fu getdeffol()
3309 and
3310 .Fu getfolder(FCUR)
3311 with
3312 .Fu getcurfol() ,
3313 which is only a convenience wrapper for
3314 .Fu expandfol("@") .
3315 This code was moved from
3316 .Fn sbr/getfolder.c
3317 to
3318 .Fn sbr/path.c .
3319 .Ci d39e2c447b0d163a5a63f480b23d06edb7a73aa0
3320 .P
3321 The related function
3322 .Fu etcpath()
3323 was moved to
3324 .Fn sbr/path.c ,
3325 too
3326 .Ci b4c29794c12099556151d93a860ee51badae2e35 .
3327 Previously, it had been located in
3328 .Fn config/config.c ,
3329 for whatever reasons.
3330 .P
3331 .Fn sbr/path.c
3332 now contains all path handling code.
3333 .\" XXX naechste zeile weg?
3334 Only 173 lines of code were needed to replace the previous 252 lines.
3335 The readability of the code is highly improved.
3336 Additionally, each of the six exported and one static functions
3337 is introduced by an explaining comment.
3342 .H2 "Profile Reading
3343 .P
3344 The MH profile contains the configuration for the user-specific MH setup.
3345 MH tools read the profile right after starting up,
3346 as it contains the location of the user's mail storage
3347 and similar settings that influence the whole setup.
3348 Further more, the profile contains the default switches for the tools,
3349 hence, it must be read before the command line switches are processed.
3350 .P
3351 For historic reasons, some MH tools did not read the profile and context.
3352 Among them were
3353 .Pn post /\c
3354 .Pn spost ,
3355 .Pn mhmail ,
3356 and
3357 .Pn slocal .
3358 The reason why these tools ignored the profile were not clearly stated.
3359 During the discussion on the nmh-workers mailing list,
3360 .[
3361 nmh-workers levine post profile
3362 .]
3363 David Levine posted an explanation, quoting John Romine:
3364 .QS
3365 I asked John Romine and here's what he had to say, which
3366 agrees and provides an example that convinces me:
3367 .QS
3368 My take on this is that
3369 .Pn post
3370 should not be called by users directly, and it doesn't read the
3371 .Fn .mh_profile
3372 (only front-end UI programs read the profile).
3373 .QP
3374 For example, there can be contexts where
3375 .Pn post
3376 is called by a helper program (like `\c
3377 .Pn mhmail ')
3378 which may be run by a non-MH user.
3379 We don't want this to prompt the user to create an MH profile, etc.
3380 .QP
3381 My suggestion would be to have
3382 .Pn send
3383 pass a (hidden) `\c
3384 .Sw -fileproc
3385 .Ar proc '
3386 option to
3387 .Pn post
3388 if needed.
3389 You could also
3390 use an environment variable (I think
3391 .Pn send /\c
3392 .Pn whatnow
3393 do this).
3394 .QE
3395 I think that's the way to go.
3396 My personal preference is to use a command line option,
3397 not an environment variable.
3398 .QE
3399 .P
3400 To solve the problem of
3401 .Pn post
3402 not honoring the
3403 .Pe fileproc
3404 profile entry,
3405 the community roughly agreed that a switch
3406 .Sw -fileproc
3407 should be added to
3408 .Pn post
3409 to be able to pass a different fileproc.
3410 I strongly disagree with this approach because it does not solve
3411 the problem; it only removes a single symptom.
3412 The problem is that
3413 .Pn post
3414 does not behave as expected.
3415 But all programs should behave as expected.
3416 Clear and simple concepts are a precondition for this.
3417 Hence, the real solution is having all MH tools read the profile.
3418 .P
3419 The problem has a further aspect.
3420 It mainly originates in
3421 .Pn mhmail .
3422 .Pn mhmail
3423 was intended to be a replacement for
3424 .Pn mailx
3425 on systems with MH installations.
3426 .Pn mhmail
3427 should have been able to use just like
3428 .Pn mailx ,
3429 but sending the message via MH's
3430 .Pn post
3431 instead of
3432 .Pn sendmail .
3433 Using
3434 .Pn mhmail
3435 should not be influenced by the question whether the user had
3436 MH set up for himself or not.
3437 .Pn mhmail
3438 did not read the profile as this requests the user to set up MH
3439 if not done yet.
3440 As
3441 .Pn mhmail
3442 used
3443 .Pn post ,
3444 .Pn post
3445 could not read the profile neither.
3446 This is the reason why
3447 .Pn post
3448 does not read the profile.
3449 This is the reason for the actual problem.
3450 It was not much of a problem because
3451 .Pn post
3452 was not intended to be used by users directly.
3453 .Pn send
3454 is the interactive front-end to
3455 .Pn post .
3456 .Pn send
3457 read the profile and passed all relevant values on the command line to
3458 .Pn post
3459 \(en an awkward solution.
3460 .P
3461 The important insight is that
3462 .Pn mhmail
3463 is no true MH tool.
3464 The concepts broke because this outlandish tool was treated as any other
3465 MH tool.
3466 Instead it should have been treated accordingly to its foreign style.
3467 The solution is not to prevent the tools reading the profile but
3468 to instruct them reading a different profile.
3469 .Pn mhmail
3470 could have set up a well-defined profile and caused all MH tools
3471 in the session to use it by exporting an environment variable.
3472 With this approach, no special cases would have been introduced,
3473 no surprises would have been caused.
3474 By writing a clean-profile-wrapper, the concept could have been
3475 generalized orthogonally to the whole MH tool chest.
3476 Then Rose's motivation behind the decision that
3477 .Pn post
3478 ignores the profile, as quoted by Jeffrey Honig,
3479 .[
3480 nmh-workers post profile
3481 .]
3482 would have become possible:
3483 .QS
3484 when you run mh commands in a script, you want all the defaults to be
3485 what the man page says.
3486 when you run a command by hand, then you want your own defaults...
3487 .QE
3488 .LP
3489 Yet, I consider this explanation shortsighted.
3490 We should rather regard theses two cases as just two different MH setups,
3491 based on two different profiles.
3492 Mapping such problems on the concepts of switching between different
3493 profiles, solves them once for all.
3494 .P
3495 In mmh, the wish to have
3496 .Pn mhmail
3497 as a replacement for
3498 .Pn mailx
3499 is considered obsolete.
3500 Mmh's
3501 .Pn mhmail
3502 does no longer cover this use-case.
3503 Currently,
3504 .Pn mhmail
3505 is in a transition state.
3506 .Ci 32d4f9daaa70519be3072479232ff7be0500d009
3507 It may become a front-end to
3508 .Pn comp ,
3509 which provides an interface more convenient in some cases.
3510 In this case,
3511 .Pn mhmail
3512 will become an ordinary MH tool, reading the profile.
3513 If, however, this idea will not convince, then
3514 .Pn mhmail
3515 will be removed.
3516 .P
3517 Every program in the mmh tool chest reads the profile.
3518 The only exception is
3519 .Pn slocal ,
3520 which is not considered part of the mmh tool chest.
3521 This MDA is only distributed with mmh, currently.
3522 Mmh has no
3523 .Pn post
3524 program, but
3525 .Pn spost ,
3526 which now reads the profile.
3527 .Ci 3e017a7abbdf69bf0dff7a4073275961eda1ded8
3528 With this change,
3529 .Pn send
3530 and
3531 .Pn spost
3532 can be considered to be merged.
3533 .Pn spost
3534 is only invoked directly by the to-be-changed
3535 .Pn mhmail
3536 implementation and by
3537 .Pn rcvdist ,
3538 which will require rework.
3539 .P
3540 The
3541 .Fu context_foil()
3542 function to pretend to have read an empty profile was removed.
3543 .Ci 68af8da96bea87a5541988870130b6209ce396f6
3544 All mmh tools read the profile.
3548 .H2 "Standard Libraries
3549 .P
3550 MH is one decade older than the POSIX and ANSI C standards.
3551 Hence, MH included own implementations of functions
3552 that are standardized and thus widely available today,
3553 but were not back then.
3554 Today, twenty years after the POSIX and ANSI C were published,
3555 developers can expect systems to comply with these standards.
3556 In consequence, MH-specific replacements for standard functions
3557 can and should be dropped.
3558 Kernighan and Pike advise: ``Use standard libraries.''
3559 .[ [
3560 kernighan pike practice of programming
3561 .], p. 196]
3562 Actually, MH had followed this advice in history,
3563 but it had not adjusted to the changes in this field.
3564 The
3565 .Fu snprintf()
3566 function, for instance, was standardized with C99 and is available
3567 almost everywhere because of its high usefulness.
3568 The project's own implementation of
3569 .Fu snprintf()
3570 was dropped in March 2012 in favor for using the one of the
3571 standard library.
3572 .Ci 0052f1024deb0a0a2fc2e5bacf93d45a5a9c9b32
3573 Such decisions limit the portability of mmh
3574 if systems do not support these standardized and widespread functions.
3575 This compromise is made because mmh focuses on the future.
3576 .P
3577 .\" XXX kuerzen und mit dem naechsten Absatz vereinen
3578 I am still in my twenties and my C and Unix experience comprises
3579 only half a dozen years.
3580 Hence, I need to learn about the history in retrospective.
3581 I have not used those ancient constructs myself.
3582 I have not suffered from their incompatibilities.
3583 I have not longed for standardization.
3584 All my programming experience is from a time when ANSI C and POSIX
3585 were well established already.
3586 I have only read a lot of books about the (good) old times.
3587 This puts me in a difficult position when working with old code.
3588 I need to freshly acquire knowledge about old code constructs and ancient
3589 programming styles, whereas older programmers know these things by
3590 heart from their own experience.
3591 .P
3592 Being aware of the situation, I rather let people with more historic
3593 experience replace ancient code constructs with standardized ones.
3594 Lyndon Nerenberg covered large parts of this task for the nmh project.
3595 He converted project-specific functions to POSIX replacements,
3596 also removing the conditionals compilation of now standardized features.
3597 Ken Hornstein and David Levine had their part in the work, too.
3598 Often, I only needed to pull over changes from nmh into mmh.
3599 These changes include many commits; these are among them:
3600 .Ci 768b5edd9623b7238e12ec8dfc409b82a1ed9e2d
3601 .Ci 0052f1024deb0a0a2fc2e5bacf93d45a5a9c9b32 .
3602 .P
3603 During my own work, I tidied up the \fIMH standard library\fP,
3604 .Fn libmh.a ,
3605 which is located in the
3606 .Fn sbr
3607 (``subroutines'') directory in the source tree.
3608 The MH library includes functions that mmh tools usually need.
3609 Among them are MH-specific functions for profile, context, sequence,
3610 and folder handling, but as well
3611 MH-independent functions, such as auxiliary string functions,
3612 portability interfaces and error-checking wrappers for critical
3613 functions of the standard library.
3614 .P
3615 I have replaced the
3616 .Fu atooi()
3617 function with calls to
3618 .Fu strtoul()
3619 with the third parameter, the base, set to eight.
3620 .Fu strtoul()
3621 is part of C89 and thus considered safe to use.
3622 .Ci c490c51b3c0f8871b6953bd0c74551404f840a74
3623 .P
3624 I did remove project-included fallback implementations of
3625 .Fu memmove()
3626 and
3627 .Fu strerror() ,
3628 although Peter Maydell had re-included them into nmh in 2008
3629 to support SunOS 4.
3630 Nevertheless, these functions are part of ANSI C.
3631 Systems that do not even provide full ANSI C support should not
3632 put a load on mmh.
3633 .Ci b067ff5c465a5d243ce5a19e562085a9a1a97215
3634 .P
3635 The
3636 .Fu copy()
3637 function copies the string in parameter one to the location in
3638 parameter two.
3639 In contrast to
3640 .Fu strcpy() ,
3641 it returns a pointer to the terminating null-byte in the destination area.
3642 The code was adjusted to replace
3643 .Fu copy()
3644 with
3645 .Fu strcpy() ,
3646 except within
3647 .Fu concat() ,
3648 where
3649 .Fu copy()
3650 was more convenient.
3651 Therefore, the definition of
3652 .Fu copy()
3653 was moved into the source file of
3654 .Fu concat()
3655 and its visibility is now limited to it.
3656 .Ci 552fd7253e5ee9e554c5c7a8248a6322aa4363bb
3657 .P
3658 The function
3659 .Fu r1bindex()
3660 had been a generalized version of
3661 .Fu basename()
3662 with minor differences.
3663 As all calls to
3664 .Fu r1bindex()
3665 had the slash (`/') as delimiter anyway,
3666 replacing
3667 .Fu r1bindex()
3668 with the more specific and better-named function
3669 .Fu basename()
3670 became desirable.
3671 Unfortunately, many of the 54 calls to
3672 .Fu r1bindex()
3673 depended on a special behavior,
3674 which differed from the POSIX specification for
3675 .Fu basename() .
3676 Hence,
3677 .Fu r1bindex()
3678 was kept but renamed to
3679 .Fu mhbasename() ,
3680 fixing the delimiter to the slash.
3681 .Ci 240013872c392fe644bd4f79382d9f5314b4ea60
3682 For possible uses of
3683 .Fu r1bindex()
3684 with a different delimiter,
3685 the ANSI C function
3686 .Fu strrchr()
3687 provides the core functionality.
3688 .P
3689 The
3690 .Fu ssequal()
3691 function \(en apparently for ``substring equal'' \(en
3692 was renamed to
3693 .Fu isprefix() ,
3694 because this is what it actually checks.
3695 .Ci c20b4fa14515c7ab388ce35411d89a7a92300711
3696 Its source file had included the following comments, no joke.
3697 .VS
3698 /*
3699 * THIS CODE DOES NOT WORK AS ADVERTISED.
3700 * It is actually checking if s1 is a PREFIX of s2.
3701 * All calls to this function need to be checked to see
3702 * if that needs to be changed. Prefix checking is cheaper, so
3703 * should be kept if it's sufficient.
3704 */
3706 /*
3707 * Check if s1 is a substring of s2.
3708 * If yes, then return 1, else return 0.
3709 */
3710 VE
3711 Two months later, it was completely removed by replacing it with
3712 .Fu strncmp() .
3713 .Ci b0b1dd37ff515578cf7cba51625189eb34a196cb
3719 .H2 "User Data Locations
3720 .P
3721 In nmh, a personal setup consists of the MH profile and the MH directory.
3722 The profile is a file named
3723 .Fn \&.mh_profile
3724 in the user's home directory.
3725 It contains the static configuration.
3726 It also contains the location of the MH directory in the profile entry
3727 .Pe Path .
3728 The MH directory contains the mail storage and is the first
3729 place to search for personal forms, scan formats, and similar
3730 configuration files.
3731 The location of the MH directory can be chosen freely by the user.
3732 The default and usual name is a directory named
3733 .Fn Mail
3734 in the home directory.
3735 .P
3736 The way MH data is splitted between profile and MH directory is a legacy.
3737 It is only sensible in a situation where the profile is the only
3738 configuration file.
3739 Why else should the mail storage and the configuration files be intermixed?
3740 They are different kinds of data:
3741 The data to be operated on and the configuration to change how
3742 tools operate.
3743 .\" XXX bad ... inapropriate?
3744 Splitting the configuration between the profile and the MH directory
3745 is bad.
3746 Merging the mail storage and the configuration in one directory is bad
3747 as well.
3748 As the mail storage and the configuration were not separated sensibly
3749 in the first place, I did it now.
3750 .P
3751 Personal mmh data is grouped by type, resulting in two distinct parts:
3752 the mail storage and the configuration.
3753 In mmh, the mail storage directory still contains all the messages,
3754 but, in exception of public sequences files, nothing else.
3755 In difference to nmh, the auxiliary configuration files are no longer
3756 located there.
3757 Therefore, the directory is no longer called the user's \fIMH directory\fP
3758 but his \fImail storage\fP.
3759 Its location is still user-chosen, with the default name
3760 .Fn Mail ,
3761 in the user's home directory.
3762 In mmh, the configuration is grouped together in
3763 the hidden directory
3764 .Fn \&.mmh
3765 in the user's home directory.
3766 This \fImmh directory\fP contains the context file, personal forms,
3767 scan formats, and the like, but also the user's profile, now named
3768 .Fn profile .
3769 The location of the profile is no longer fixed to
3770 .Fn $HOME/.mh_profile
3771 but to
3772 .Fn $HOME/.mmh/profile .
3773 Having both the file
3774 .Fn $HOME/.mh_profile
3775 and the configuration directory
3776 .Fn $HOME/.mmh
3777 appeared to be inconsistent.
3778 The approach chosen for mmh is consistent, simple, and familiar to
3779 Unix users.
3780 .Ci 7030d7edb099bff36ded7548bb5380f7acab4f9b
3781 .P
3782 MH allows users to have multiple MH setups.
3783 Therefore, it is necessary to select a different profile.
3784 The profile is the single entry point to access the rest of a
3785 personal MH setup.
3786 In nmh, the environment variable
3787 .Ev MH
3788 could be used to specifiy a different profile.
3789 To operate in the same MH setup with a separate context,
3790 the
3791 .Ev MHCONTEXT
3792 environment variable could be used.
3793 This allows having own current folders and current messages in
3794 each terminal, for instance.
3795 In mmh, three environment variables are used.
3796 .Ev MMH
3797 overrides the default location of the mmh directory (\c
3798 .Fn .mmh ).
3799 .Ev MMHP
3800 and
3801 .Ev MMHC
3802 override the paths to the profile and context files, respectively.
3803 This approach allows the set of personal configuration files to be chosen
3804 independently from the profile, context, and mail storage.
3805 .Ci 7030d7edb099bff36ded7548bb5380f7acab4f9b
3806 .P
3807 The separation of the files by type is sensible and convenient.
3808 The new approach has no functional disadvantages,
3809 as every setup I can imagine can be implemented with both approaches,
3810 possibly even easier with the new approach.
3811 The main achievement of the change is the clear and sensible split
3812 between mail storage and configuration.
3818 .H2 "Modularization
3819 .P
3820 The source code of the mmh tools is located in the
3821 .Fn uip
3822 (``user interface programs'') directory.
3823 Each tool has a source file with the name of the command.
3824 For example,
3825 .Pn rmm
3826 is built from
3827 .Fn uip/rmm.c .
3828 Some source files are used for multiple programs.
3829 For example
3830 .Fn uip/scansbr.c
3831 is used for both
3832 .Pn scan
3833 and
3834 .Pn inc .
3835 In nmh, 49 tools were built from 76 source files.
3836 This is a ratio of 1.6 source files per program.
3837 32 programs depended on multiple source files;
3838 17 programs depended on one source file only.
3839 In mmh, 39 tools are built from 51 source files.
3840 This is a ratio of 1.3 source files per program.
3841 18 programs depend on multiple source files;
3842 21 programs depend on one source file only.
3843 (These numbers and the ones in the following text ignore the MH library
3844 as well as shell scripts and multiple names for the same program.)
3845 .\" XXX graph
3846 .P
3847 Splitting the source code of a large program into multiple files can
3848 increase the readability of its source code.
3849 .\" XXX however?
3850 Most of the mmh tools are simple and straight-forward programs.
3851 With the exception of the MIME handling tools,
3852 .Pn pick
3853 is the largest tool.
3854 It contains 1\|037 lines of source code, excluding the MH library.
3855 Only the MIME handling tools (\c
3856 .Pn mhbuild ,
3857 .Pn mhstore ,
3858 .Pn show ,
3859 etc.)
3860 are larger.
3861 Splitting programs with less than 1\|000 lines of code into multiple
3862 source files seldom leads to better readability.
3863 For such tools, splitting makes sense
3864 when parts of the code are reused in other programs,
3865 and the reused code fragment is (1) not general enough
3866 for including it in the MH library
3867 or (2) has dependencies on a library that only few programs need.
3868 .Fn uip/packsbr.c ,
3869 for instance, provides the core program logic for the
3870 .Pn packf
3871 and
3872 .Pn rcvpack
3873 programs.
3874 .Fn uip/packf.c
3875 and
3876 .Fn uip/rcvpack.c
3877 mainly wrap the core function appropriately.
3878 No other tools use the folder packing functions.
3879 As another example,
3880 .Fn uip/termsbr.c
3881 provides termcap support, which requires linking with a termcap or
3882 curses library.
3883 Including
3884 .Fn uip/termsbr.c
3885 into the MH library would require every program to be linked with
3886 termcap or curses, although only few of the programs require it.
3887 .P
3888 The task of MIME handling is complex enough that splitting its code
3889 into multiple source files improves the readability.
3890 The program
3891 .Pn mhstore ,
3892 for instance, is compiled out of seven source files with 2\|500
3893 lines of code in summary.
3894 The main code file
3895 .Fn uip/mhstore.c
3896 consists of 800 lines; the other 1\|700 lines of code are reused in
3897 other MIME handling tools.
3898 It seems to be worthwhile to bundle the generic MIME handling code into
3899 a MH-MIME library, as a companion to the MH standard library.
3900 This is left open for the future.
3901 .P
3902 The work already accomplished focussed on the non-MIME tools.
3903 The amount of code compiled into each program was reduced.
3904 This eases the understanding of the code base.
3905 In nmh,
3906 .Pn comp
3907 was built from six source files:
3908 .Fn comp.c ,
3909 .Fn whatnowproc.c ,
3910 .Fn whatnowsbr.c ,
3911 .Fn sendsbr.c ,
3912 .Fn annosbr.c ,
3913 and
3914 .Fn distsbr.c .
3915 In mmh, it builds from only two:
3916 .Fn comp.c
3917 and
3918 .Fn whatnowproc.c .
3919 In nmh's
3920 .Pn comp ,
3921 the core function of
3922 .Pn whatnow ,
3923 .Pn send ,
3924 and
3925 .Pn anno
3926 were compiled into
3927 .Pn comp .
3928 This saved the need to execute these programs with
3929 .Fu fork()
3930 and
3931 .Fu exec() ,
3932 two expensive system calls.
3933 Whereas this approach improved the time performance,
3934 it interwove the source code.
3935 Core functionalities were not encapsulated into programs but into
3936 function, which were then wrapped by programs.
3937 For example,
3938 .Fn uip/annosbr.c
3939 included the function
3940 .Fu annotate() .
3941 Each program that wanted to annotate messages, included the source file
3942 .Fn uip/annosbr.c
3943 and called
3944 .Fu annotate() .
3945 Because the function
3946 .Fu annotate()
3947 was used like the tool
3948 .Pn anno ,
3949 it had seven parameters, reflecting the command line switches of the tool.
3950 When another pair of command line switches was added to
3951 .Pn anno ,
3952 a rather ugly hack was implemented to avoid adding another parameter
3953 to the function.
3954 .Ci d9b1d57351d104d7ec1a5621f090657dcce8cb7f
3955 .P
3956 Separation simplifies the understanding of program code
3957 because the area influenced by any particular statement is smaller.
3958 The separating on the program-level is more strict than the separation
3959 on the function level.
3960 In mmh, the relevant code of
3961 .Pn comp
3962 comprises the two files
3963 .Fn uip/comp.c
3964 and
3965 .Fn uip/whatnowproc.c ,
3966 together 210 lines of code.
3967 In nmh,
3968 .Pn comp
3969 comprises six files with 2\|450 lines.
3970 Not all of the code in these six files was actually used by
3971 .Pn comp ,
3972 but the code reader needed to read all of the code first to know which
3973 parts were used.
3974 .P
3975 As I have read a lot in the code base during the last two years,
3976 I learned about the easy and the difficult parts.
3977 Code is easy to understand if the influenced code area is small
3978 and its boundaries are strictly defined.
3979 Further more, the code needs to solve the problem in a straight-forward way.
3980 .P
3981 .\" XXX move this paragraph somewhere else?
3982 Reading
3983 .Pn rmm 's
3984 source code in
3985 .Fn uip/rmm.c
3986 is my recommendation for a beginner's entry point into the code base of nmh.
3987 The reasons are that the task of
3988 .Pn rmm
3989 is straight forward and it consists of one small source code file only,
3990 yet its source includes code constructs typical for MH tools.
3991 With the introduction of the trash folder in mmh,
3992 .Pn rmm
3993 became a bit more complex, because it invokes
3994 .Pn refile .
3995 Still, it is a good example for a simple tool with clear sources.
3996 .P
3997 Understanding
3998 .Pn comp
3999 .\" XXX kate fragen: more vs. as much
4000 requires to read 210 lines of code in mmh, but ten times more in nmh.
4001 Due to the aforementioned hack in
4002 .Pn anno
4003 to save the additional parameter, information passed through the program's
4004 source base in obscure ways.
4005 Thus, understanding
4006 .Pn comp ,
4007 required understanding the inner workings of
4008 .Fn uip/annosbr.c
4009 first.
4010 To be sure to fully understand a program, its whole source code needs
4011 to be examined.
4012 Not doing so is a leap of faith, assuming that the developers
4013 have avoided obscure programming techniques.
4014 By separating the tools on the program-level, the boundaries are
4015 clearly visible and technically enforced.
4016 The interfaces are calls to
4017 .Fu exec()
4018 rather than arbitrary function calls.
4019 .P
4020 But the real problem is another:
4021 Nmh violates the golden ``one tool, one job'' rule of the Unix philosophy.
4022 Understanding
4023 .Pn comp
4024 requires understanding
4025 .Fn uip/annosbr.c
4026 and
4027 .Fn uip/sendsbr.c
4028 because
4029 .Pn comp
4030 does annotate and send messages.
4031 In nmh, there surely exists the tool
4032 .Pn send ,
4033 which does mainly send messages.
4034 But
4035 .Pn comp
4036 and
4037 .Pn repl
4038 and
4039 .Pn forw
4040 and
4041 .Pn dist
4042 and
4043 .Pn whatnow
4044 and
4045 .Pn viamail ,
4046 they all (!) have the same message sending function included, as well.
4047 In result,
4048 .Pn comp
4049 sends messages without using
4050 .Pn send .
4051 The situation is the same as if
4052 .Pn grep
4053 would page without
4054 .Pn more
4055 just because both programs are part of the same code base.
4056 .P
4057 The clear separation on the surface \(en the tool chest approach \(en
4058 is violated on the level below.
4059 This violation is for the sake of time performance.
4060 On systems where
4061 .Fu fork()
4062 and
4063 .Fu exec()
4064 are expensive, the quicker response might be noticable.
4065 In the old times, sacrificing readability and conceptional beauty for
4066 speed might even have been a must to prevent MH from being unusably slow.
4067 Whatever the reasons had been, today they are gone.
4068 No longer should we sacrifice readability or conceptional beauty.
4069 No longer should we violate the Unix philosophy's ``one tool, one job''
4070 guideline.
4071 No longer should we keep speed improvements that became unnecessary.
4072 .P
4073 Therefore, mmh's
4074 .Pn comp
4075 does no longer send messages.
4076 In mmh, different jobs are divided among separate programs that
4077 invoke each other as needed.
4078 In consequence,
4079 .Pn comp
4080 invokes
4081 .Pn whatnow
4082 which thereafter invokes
4083 .Pn send .
4084 .Ci 3df5ab3c116e6d4a2fb4bb5cc9dfc5f781825815
4085 .Ci c73c00bfccd22ec77e9593f47462aeca4a8cd9c0
4086 The clear separation on the surface is maintained on the level below.
4087 Human users and the tools use the same interface \(en
4088 annotations, for example, are made by invoking
4089 .Pn anno ,
4090 no matter if requested by programs or by human beings.
4091 .Ci 469a4163c2a1a43731d412eaa5d9cae7d670c48b
4092 .Ci aed384169af5204b8002d06e7a22f89197963d2d
4093 .Ci 3caf9e298a8861729ca8b8a84f57022b6f3ea742
4094 The decrease of tools built from multiple source files and thus
4095 the decrease of
4096 .Fn uip/*sbr.c
4097 files confirm the improvement.
4098 .Ci 9e6d91313f01c96b4058d6bf419a8ca9a207bc33
4099 .ci 81744a46ac9f845d6c2b9908074d269275178d2e
4100 .Ci f0f858069d21111f0dbea510044593f89c9b0829
4101 .Ci 0503a6e9be34f24858b55b555a5c948182b9f24b
4102 .Ci 27826f9353e0f0b04590b7d0f8f83e60462b90f0
4103 .Ci d1da1f94ce62160aebb30df4063ccbc53768656b
4104 .Ci c42222869e318fff5dec395eca3e776db3075455
4105 .P
4106 .\" XXX move this paragraph up somewhere
4107 One disadvantage needs to be taken with this change:
4108 The compiler can no longer check the integrity of the interfaces.
4109 By changing the command line interfaces of tools, it is
4110 the developer's job to adjust the invocations of these tools as well.
4111 As this is a manual task and regression tests, which could detect such
4112 problems, are not available yet, it is prone to errors.
4113 These errors will not be detected at compile time but at run time.
4114 Installing regression tests is a pending task.
4115 In the best case, a uniform way of invoking tools from other tools
4116 can be developed to allow automated testing at compile time.
4119 .ig
4120 XXX consider writing about mhl vs. mhlproc
4122 sbr/showfile.c
4124 23 /*
4125 24 ** If you have your lproc listed as "mhl",
4126 25 ** then really invoked the mhlproc instead
4127 26 ** (which is usually mhl anyway).
4128 27 */
4130 Sat Nov 24 19:09:14 1984 /mtr (agent: Marshall Rose) <uci@udel-dewey>
4132 sbr/showfile.c: if lproc is "mhl", use mhlproc for consistency
4133 (Actually, user should use "lproc: show", "showproc: mhl".)
4134 ..